Stackable switch

Stackable switch

A stackable switch is a network switch that is fully functional operating standalone but which can also be set-up to operate together with one or more other network switches, with this group of switches showing the characteristics of a single switch but having the port capacity of the sum of the combined switches.

The term “stack” refers to the group of switches that have been set-up in this way.

The common characteristic of a stack acting as a single switch is that there is a single IP address for remote administration of the stack as a whole, not an IP address for the administration of each unit in the stack.

Stackable switches are customarily Ethernet, Rack-mounted, managed switches of 1 – 2 rack unit (RU) in size, with a fixed set of data ports on the front. Some models have slots for optional slide-in modules to add ports or features to the base stackable unit. The most common configurations are 24-Port and 48-Port models.

Comparison With Other Switch Architectures

A stackable switch is distinct from a standalone switch, which only operates as a single entity. A stackable switch is distinct from a switch modular chassis.

Stackable switches have these benefits:
# Simplified network administration: Whether a stackable switch is operated alone or “stacked” with other units, there is always just a single management interface for the network administrator to deal with. This simplifies the set-up and operation of the network.
# Scalability: A small network can be formed around a single stackable unit, and then the network can be grown by adding additional units over time if and when needed, with little added management complexity.
# Deployment flexibility: Stackable switches can operate together with other stackable switches or can operate independently. Units one day can be combined as a stack in a single site, and later can be run in different locations as independent switches.
# Resilient connections: In some vendor architectures, active connections can be spread across multiple units so that should one unit in a stack be removed or fail, data will continue to flow through other units that remain functional.

Compared with a modular chassis switch, stackable switches have these drawbacks:
# For locations needing numerous ports, a modular chassis may be lower cost. With stackable switching, each unit in a stack has its own enclosure and at minimum a single power supply. With modular switching, there is one enclosure and one set of power supplies.
# High-end modular switches have high resiliency / high redundancy features that are not found in all stackable architectures.

Functionality

Features associated with stackable switches can include:
* Single IP Address for multiple units. Multiple switches can share one IP Address for administrative purposes, thus conserving IP Addresses.
* Single management view from multiple interfaces. Stack-level views and commands can be provided from a single Command Line Interface (CLI) and/or embedded Web interface. The SNMP view into the stack can be unified.
* Stacking Resiliency. Multiple switches can have ways to bypass a “down” switch in a stack, thus allowing the remaining units to function as a stack even with a failed or removed unit.
* Layer 3 redundancy. Some stackable architectures allow for continued Layer 3 routing if there is a “down” switch in a stack. If routing is centralized in one unit in the stack, and that unit fails, then there must be a recovery mechanism to move routing to a backup unit in the stack.
* Mix and match of technology. Some stackable architectures allow for mixing switches of different technologies or from different product families, yet still achieve unified management. For example, some stacking allows for the mixing 10/100 and Gigabit switches in a stack.
* Dedicated stacking bandwidth. Some switches come with built-in ports dedicated for stacking, which can preserve other ports for data network connections and can avoid the possible expense of an additional module to add stacking. Proprietary data handling or cables can be used to achieve higher bandwidths than standard Gigabit or 10-Gigabit connections.

There is not universal agreement as to the threshold for being a stackable versus being a standalone switch. For instance, some industry analysts may say a product is not a stackable if it lacks one of the above features (e.g., dedicated bandwidth).

Terminology

Here are other terms associated with stackable switches:
* Stacking Backplane: Used to describe the connections between stacked units, and the bandwidth of that connection. Most typically, switches that have primarily Fast Ethernet ports would have at minimum Gigabit connections for its stacking backplane; likewise, switches that primarily have Gigabit Ethernet ports would have at minimum 10-Gigabit connections.
* Clustering. The term sometimes used for a stacking approach that focuses on unified management with a single IP address for multiple stackable units. Units can be distributed and of multiple types.
* Stack Master or Commander: In some stack architectures, one unit is designated the main unit of the stack. All management is routed through that single master unit. Some call this the master or commander unit. Other units in the stack are referred to as slave or member units.

Further reading

* 3Com Corporation, 1993. Manual of early 3Com stackable hub. http://support.3com.com/infodeli/tools/hubs/suprstac/16250/manual.a02/1625_0ug.pdf
* 3Com Corporation, 2004. XRN Technology Brief. http://www.3com.com/other/pdfs/products/en_US/500928.pdf
* EUSSO Technologies, 2003. Brief definition of stackable switching. http://www.eusso.com/faq03/nway/faq_nway.htm#Q01:
* NETGEAR Inc., 2001. Whitepaper on stackable switches. http://kbserver.netgear.com/pdf/FS524Swp_white_paper.pdf


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Network switch — A network switch or switching hub is a computer networking device that connects network segments. The term commonly refers to a multi port network bridge that processes and routes data at the data link layer (layer 2) of the OSI model. Switches… …   Wikipedia

  • Comparison of stackable switches — Comparison of stackable layer 3 switches (1Gbit/10Gbit) Manufacturer Part number Number of 10/100/1000 ports Number of SFP Ports Number of 10 gigabit ports (with modules) CPU type / Mhz builtin flash ROM size / upgradable to RAM size Stacking… …   Wikipedia

  • Fibre Channel switch — In the computer storage field, a Fibre Channel switch is a network switch compatible with the Fibre Channel (FC) protocol. It allows the creation of a Fibre Channel fabric, that is currently the core component of most storage area networks. The… …   Wikipedia

  • ProCurve Products — HP ProCurve Networking is the networking division of HP. They produce a line of network switches, wireless access points, WAN routers, and Access Control Servers/Software sold under the HP ProCurve Networking brand name. Available Products Core… …   Wikipedia

  • Dell PowerConnect — PowerConnect is a Dell series of network switches. The PowerConnect classic switches are based on Broadcom or Marvell Technology Group fabric and firmware. Dell also offers the PowerConnect J series which are Juniper Networks switches and the… …   Wikipedia

  • Avaya — Inc. Type Private Industry Telecommunications Founded 2000 Headquarters …   Wikipedia

  • Catalyst (Cisco Systems) —  Pour l’article homonyme, voir Catalyst .  Catalyst est le nom d une gamme de commutateurs Ethernet[1] et de routeurs commercialisés par Cisco Systems. Système d exploitation La technologie d origine des switch utilisait le système… …   Wikipédia en Français

  • List of telephone switches — This is intended to be a list of the more common central office (telephone company operated) telephone switches. This list is nowhere near complete. Many British and non North American switches are missing.AGCS*GTD 5 EAXAlcatel*E10 Five *E10B… …   Wikipedia

  • Avaya ERS 5500 — Avaya Ethernet Routing Switch 5500 Series ERS 5510 48T/5510 24T Rack mountable: 19 inch standard rack ERS 55 …   Wikipedia

  • 3Com — COMS redirects here. For the stadium in Manchester, see City of Manchester Stadium. 3Com Corporation Industry Computer network products Fate Acquired by Hewlett Packard …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”