Materials International Space Station Experiment

Materials International Space Station Experiment
MISSE's logo

The Materials International Space Station Experiment (MISSE), is a series of experiments mounted externally on the International Space Station (ISS) that investigates the effects of long-term exposure of materials to the harsh space environment.

The MISSE project evaluates the performance, stability, and long-term survivability of materials and components planned for use by NASA, commercial companies and the Department of Defense (DOD) on future low Earth orbit (LEO), synchronous orbit and interplanetary space missions. The Long Duration Exposure Facility (LDEF), which was retrieved in 1990 after spending 68 months in LEO, revealed that space environments are very hostile to many spacecraft materials and components. Atomic oxygen, which is the most prevalent atomic species encountered in low earth orbit, is highly reactive with plastics and some metals, causing severe erosion.

There is also extreme ultraviolet radiation due to the lack of an atmospheric filter. This radiation deteriorates and darkens many plastics and coatings. The vacuum in space also alters the physical properties of many materials. Impacts of meteoroids and orbiting man-made debris can damage all materials exposed in space. The combined effects of all of these environments on spacecraft can only be investigated in space. MISSE evaluates materials currently being used and those planned for use in future space missions.[1]

MISSE is a direct successor of the Mir Environmental Effects Payloads (MEEP) that were attached for over a year to the Mir Docking Module of the space station Mir between shuttle flights STS-76 and STS-86;[2] and is a descendant of the Long Duration Exposure Facility. Also MEEPS can trace their inception to the Passive Optical Sample Array (POSA) sample trays flown on STS-1 and STS-2, and their successor Effects of Oxygen Interaction with Materials (EOIM) on STS-3 and STS-5.

MISSE PEC closed
MISSE PEC closed

Contents

Materials tested

About 1,508 samples are being tested on the MISSE project. Samples range from components such as switches, sensors and mirrors to materials like polymers, coatings, and composites. There are also biological materials such as seeds, spores and various types of bacteria being evaluated. Each material on the mission had to be individually tested in the laboratory prior to being selected. The ultimate test for the materials is when they are exposed to the space environment. In the laboratory, each material can only be exposed to one particular simulated environment at a time. In space, they are exposed to all of the environments at once. Besides testing new materials, MISSE will also be addressing questions concerning current materials, such as those being used in communication satellites which are being plagued with premature failures of the solar cell power arrays. New generations of solar cells with longer expected lifetimes will also be tested.

MISSE will also be testing coatings used to control heat absorption and emission temperatures of satellites. The hostile environment of space limits the useful life of currently used coatings. New coatings, which are expected to be much more stable in space and therefore have longer useful lives, will be tested. MISSE will also address a major problem for a manned exploration of Mars: shielding the crew from the very energetic cosmic rays found in interplanetary space. New concepts for lightweight shields will be tested on MISSE. Ultra-light membrane structures are planned for solar sails, large inflatable mirrors and lenses. The effects of micrometeoroid impacts on these materials will also be investigated.[1]

Deploying MISSE

The materials selected for the mission are placed into suitcase-like Passive Experiment Containers (PECs). The PECs are used for transporting experiments to and from ISS. During an EVA they are placed on handrails or at an exposed experiment facility of the ISS. The experiments are photographed several times during their stay outside if possible, usually whenever an opportunity arises due to a scheduled EVA. After exposure in space, MISSE is retrieved in the same manner as it was deployed, the material samples are tested to see if they still have the unique properties needed to complete space missions. MISSEs have active and passive detectors to give a time-history reading, or a reading of what happened to the materials at certain points in time. Back on the ground, tests will be conducted to determine the effects of its exposure. These tests will determine which materials are strong enough to survive in space.

Originally it was planned to have MISSE-1 and 2 deployed for about a year and MISSE-3 and 4 for up to three years. Due to the grounding of the shuttle fleet after the Space Shuttle Columbia disaster required that changes be made to these plans. MISSEs 1 and 2 provided the three-year data and MISSEs 3 and 4 have provided the one-year data.[3]

MISSE-1 and MISSE-2

The first and second set of experiments was launched by Space Shuttle Discovery, during mission STS-105, on 10 August 2001 and contained 910 specimens of various materials.[4] It was installed in two separate airlock handrails located on the Quest Joint Airlock and high-pressure gas tanks.[5]

On 30 July 2005, during the first EVA of mission STS-114, both experiments were retrieved.[6]

MISSE-5

This was the third MISSE experiment launched, although the fifth MISSE PEC. MISSE-5 was launched by Space Shuttle Discovery on mission STS-114, on 26 July 2005 and contained 254 specimens of various materials.[7] It was installed on the P6 truss and a year later, during the third EVA of mission STS-115 on 15 September 2006, the MISSE-5 package was retrieved.[8]

MISSE-5 contained three investigations. One experiment the Forward Technology Solar Cell Experiment (FTSCE), a performance test of 36 solar cells for use on future spacecraft. The second investigation measured the degradation of more than 200 flexible materials in the space environment. The third experiment involved the PCSat-2 that provided a communications system and tested the Amateur Satellite Service off-the-shelf solution for telemetry command and control. MISSE-5 was the first active experiment of the MISSE series. It required power and could communicate with the ground through PCSat-2.[9]

MISSE-3 and MISSE-4

The fourth and fifth set of MISSE experiments (MISSE PEC3 and MISSE PEC4) were launched by Space Shuttle Discovery, during mission STS-121, on 3 August 2006 and contained 875 specimens of various materials.[10] The MISSE-3 was installed on one of the high-pressure tanks around the crew lock and the MISSE-4 on the outboard end of the Quest Joint Airlock by the Expedition 13's crew.[11] A year later, during the fourth EVA of mission STS-118 on 18 August 2007, the MISSE-3 and 4 experiments were retrieved.[12]

MISSEs 3 and 4 also served an educational purpose, it flew approximately eight million basil seeds that were given to children for science experiments, in order to stimulate interest in space science.[3]

MISSE-6

The sixth set of MISSE experiments, labeled 6A and 6B, were launched by Space Shuttle Endeavour, during mission STS-123, on 13 March 2008 and contain over 400 specimens of various materials.[13] It was installed on the Columbus External Payload Facility. Installation was attempted during the third EVA, however the case did not initially fit onto the bracket.[14] It was successfully installed during the fifth EVA.[15]

Both MISSE 6A and 6B were retrieved during the first EVA of mission STS-128 and returned to Earth.[16][17][17]

MISSE-7

The seventh set of MISSE experiments was located on ExPRESS Logistics Carrier 2.[18] They were brought to the station in November 2009 aboard mission STS-129.

MISSE-7 is composed of two suitcase-sized Passive Experiment Containers (PECs), identified as MISSE 7A and MISSE 7B. Once installed in the exterior of ISS by space walking astronauts, the PECs were opened. The orientation of MISSE 7A was space facing/Earth facing while MISSE 7B faced forward/backward relative to the ISS orbit. Both MISSE 7A and MISSE 7B contained active and passive experiments. Passive experiments are designed for pre- and post-flight evaluation in ground-based laboratories. Being a first in the MISSE program, active experiments are designed to interface with the power and communication systems on ISS allowing data to be transmitted back to Earth.

MISSE-7 also contained experiments mounted to its ExPA base. These experiments included SpaceCube which was developed by engineers at the NASA Goddard Space Flight Center and is a reconfigurable, high-performance system based on Xilinx's Virtex-4 commercial FPGAs designed for spaceflight applications requiring compute intensive on-board processing. The MISSE-7 SpaceCube’s purpose was to serve as an “on-orbit” test-bed for demonstrating “radiation hardened by software” program execution and error detection and correction techniques that will help enable the use of commercial processing devices in space.[19]

The Naval Research Laboratory handled primary responsibility for MISSE 7A, while the Air Force Research Laboratory, NASA, Boeing, other industry collaborators, and academia had experiments on MISSE 7B.[20]

The two PECs were collected for return to Earth during the STS-134 mission.

MISSE-7 Experiments

  • SpaceCube is a small, light-weight, reconfigurable multi-processor platform for space flight applications demanding extreme processing capabilities. It utilizes a stackable architecture and is based on Xilinx Virtex 4 FX60 FPGAs (2 per processor card). The SpaceCube's first mission was on Hubble Servicing Mission 4 as part of the Relative Navigation Sensors experiment.[21] The SpaceCube will provide an on-orbit test platform for demonstrating innovative radiation hardened by software techniques.[19]

MISSE-8

The STS-134 mission, launched May 2011, delivered the MISSE PEC8 experiment and returned MISSE PEC7A & PEC7B to earth. MISSE-7 had been on the ISS since its delivery on STS-129.[22]

On STS-134 MISSE-8 was only one PEC, STS-135 crewmen added the MISSE-8 ORMatE-III exposure plate to the second MISSE mount.

Participants in MISSE

The MISSE Project is a cooperative endeavor managed by NASA Langley Research Center. Participants include: Johnson Space Center, Marshall Space Flight Center, Glenn Research Center, the Materials Laboratory at the Air Force Research Laboratory,Infosight Corporation and the Boeing Phantom Works. Shuttle/ISS MISSE integration is performed by the USAF’s DoD Space Shuttle and ISS Payload Integration Directorate.

References

  1. ^ a b "MISSE: Testing materials in space". NASA. July 2001. http://www.nasa.gov/centers/langley/news/factsheets/MISSE.html. Retrieved 2008-03-25. 
  2. ^ William H. Kinard. "MIR Environmental Effects Payload (MEEP) Archive System". NASA, Langley Research Center. http://setas-www.larc.nasa.gov/meep/meep.html. Retrieved 2008-03-25. 
  3. ^ a b "MISSE makes its mark". NASA, Langley Research Center. October 10, 2005. http://www.nasa.gov/centers/langley/news/factsheets/misse_2005.html. Retrieved 2008-03-28. 
  4. ^ "MISSE 1 and MISSE 2". NASA. http://misse1.larc.nasa.gov/pages/MISSE%201.html. 
  5. ^ "STS-105, MCC Status Report # 13". NASA, Lyndon B. Johnson Space Center. August 16, 2001. http://spaceflight.nasa.gov/spacenews/reports/sts105/STS-105-13.html. Retrieved 2008-03-25. 
  6. ^ "STS-114 MCC Status Report #09". NASA, Mission Control Center. July 30, 2005. http://www.nasa.gov/returntoflight/news/STS-114-09.html. Retrieved 2008-03-25. 
  7. ^ "MISSE 5". NASA. http://misse1.larc.nasa.gov/pages/MISSE%205.html. 
  8. ^ "STS-115 MCC Status Report #12". NASA. http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts115/news/STS-115-12.html. 
  9. ^ "Materials International Space Station Experiment - 5 (MISSE-5)". NASA. http://www.nasa.gov/mission_pages/station/science/experiments/MISSE-5.html. 
  10. ^ "MISSE 3 and MISSE 4". NASA. http://misse1.larc.nasa.gov/pages/MISSE%203.html. 
  11. ^ "Station Crewmen Back Inside After Spacewalk". NASA. http://www.nasa.gov/mission_pages/station/expeditions/expedition13/exp13_eva_08_03_2006.html. 
  12. ^ "STS-118 MCC Status Report #21". NASA. http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts118/news/STS-118-21.html. 
  13. ^ "Materials International Space Station Experiment - 6A and 6B (MISSE-6A and 6B)". NASA. http://www.nasa.gov/mission_pages/station/science/experiments/MISSE-6A-and-6B.html. 
  14. ^ "STS-123 MCC Status Report #15". NASA. http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts123/news/STS-123-15.html. 
  15. ^ "STS-123 MCC Status Report #25". NASA. http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts123/news/STS-123-25.html. 
  16. ^ http://spaceflightnow.com/shuttle/sts128/090901fd5/index3.html
  17. ^ a b http://www.nasa.gov/mission_pages/station/science/misse2009.html
  18. ^ http://www.nasa.gov/mission_pages/station/science/experiments/MISSE-7.html
  19. ^ a b David Petrick (2009). "MAPLD2009 - SpaceCube Activities". NASA. http://nepp.nasa.gov/mapld_2009/talks/090309_Thursday/Session%20E/MAPLD2009%20-%2007_Petrick_David_mapld09_pres_1-SpaceCube%20Activities%20(Handout%20Version).pptx. 
  20. ^ Donald A. Jaworske and John Siamidis. "Overview of Materials International Space Station Experiment 7B". http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20090015384_2009014998.pdf. Retrieved 6 November 2009. 
  21. ^ David Petrick (2009). "MAPLD2009 - RNS SpaceCube". NASA. http://nepp.nasa.gov/mapld_2009/talks/090109_Tuesday/Session%20A/08_Petrick_David_mapld09_pres_2/MAPLD2009%20-%20RNS%20SpaceCube.pptx. 
  22. ^ Chris Gebhardt (2009). "STS-134: PRCB Baselines Penultimate Shuttle Flight to Take AMS to Station". NASASpaceflight.com. http://www.nasaspaceflight.com/2009/06/sts-134-prcb-shuttle-ams-to-station/. Retrieved Jan 19 2010. 

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Materials International Space Station Experiment — Projektüberblick Projektname: Materials International Space Station Experiment Untersuchungsleiter: MISSE 1 bis 5: William H. Kinard, Ph.D., Langley Research Center MISSE 5: Robert Walters, Ph.D., Naval Research Laboratory Entwickler: MISSE 1 bis …   Deutsch Wikipedia

  • International Space Station — ISS redirects here. For other uses, see ISS (disambiguation). International Space Station …   Wikipedia

  • Space Test Program — The Space Test Program (STP) is the primary provider of spaceflight for the United States Department of Defense (DOD) space science and technology community. STP is conducted by the Space Development and Test Wing of the United States Air Force.… …   Wikipedia

  • Space solar power — Space based solar power (SBSP or SSP) is the conversion of solar energy into power, usable either in space or on earth, from a location in space, usually geosynchronous orbit (GSO). Photovoltaics (PV) would generally be utilized for energy… …   Wikipedia

  • space exploration — Investigation of the universe beyond Earth s atmosphere by means of manned and unmanned spacecraft. Study of the use of rockets for spaceflight began early in the 20th century. Germany s research on rocket propulsion in the 1930s led to… …   Universalium

  • Space-based solar power — Left: Part of the solar energy is lost on its way through the atmosphere by the effects of reflection and absorption. Right: Space based solar power systems convert sunlight to microwaves outside the atmosphere, avoiding these losses, and the… …   Wikipedia

  • Materials Science Laboratory — MSRR 1 (NASA) The Materials Science Laboratory (MSL) of the European Space Agency is a payload on board the International Space Station for materials science experiments in low gravity. It is installed in NASA s first Materials Science Research… …   Wikipedia

  • Station spatiale internationale — Pour les articles homonymes, voir ISS. Station spatiale internationale Assemblage …   Wikipédia en Français

  • Space Shuttle Columbia disaster — For further information about Columbia s mission and crew, see STS 107. STS 107 mission patch The Space Shuttle Columbia disaster occurred on February 1, 2003, when shortly before it was scheduled to conclude its 28th mission, STS 107, the Space… …   Wikipedia

  • Space elevator — A space elevator for Earth would consist of a cable anchored to the Earth s equator, reaching into space. By attaching a counterweight at the end (or by further extending the cable upward for the same purpose), the center of mass is kept well… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”