ISO 14644-3

ISO 14644, Cleanrooms and associated controlled environments - Part 3: Test Methods, is a highly referenced ISO document, helped developed by the Secretariat of ISO Technical Committee 209, IEST.cite web
title=ISO 14644-3 Scope
publisher=IEST
year=Last updated 2007-12-03
url=http://www.iest.org/i4a/pages/index.cfm?pageid=3322#ISO_14644-3
accessdate=2008-01-17
]

ISO 14644-3 specifies test methods for designated classification of airborne particulate cleanliness and for characterizing the performance of cleanrooms and clean zones. These test methods are specified in the document for two different types of cleanrooms and clean zones; unidirectional flow and nonunidirectional flow.

The most important objectives of this document are to provide an internationally common basis of measurement and evaluation of cleanrooms and, at the same time, not to prevent the introduction of new technologies.

References

External links

*http://www.iest.org
*http://www.ansi.org
*http://www.iso.org


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • ISO 14644 — Standards were first formed from the US Federal Standard 209E Airborne Particulate Cleanliness Classes in Cleanrooms and Clean Zones. The need for a single standard for cleanroom classification and testing was long felt. After ANSI and IEST… …   Wikipedia

  • ISO 14644-2 — ISO 14644 2, Cleanrooms and associated controlled environments Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644 1 became an International Standard following the cancellation of FED STD 209E. In the… …   Wikipedia

  • ISO 14644-7 — ISO 14644 7, Cleanrooms and associate controlled environments Part 7: Separative devices (clean air hoods, gloveboxes, isolators and minienvironments) was published as an International Standard in 2004. The document was submitted as an American… …   Wikipedia

  • ISO 14644-1 — ISO 14644 1, Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness, was the first ISO 14644 International Standard prepared by ISO Technical Committee 209 (ISO/TC 209). The document was submitted as an… …   Wikipedia

  • ISO 14644-5 — ISO 14644 5, Cleanrooms and associate controlled environments Part 5: Operations, was published as an International Standard in 2004 and is available from IEST. The document was submitted as an American National Standard and has been adopted as… …   Wikipedia

  • ISO 14644-6 — ISO 14644 6: Vocabulary as an important document for any contamination control professional. This document describes all the terms and definitions in all the ISO 14644 Standards and ISO 14698 Standards. In March 2008 this ISO Standard recently… …   Wikipedia

  • ISO 14644-8 — ISO 14644 8, Cleanrooms and associate controlled environments Part 8: Classification of airborne molecular contamination became a Standard in 2006. This document was developed by the Secretariat of ISO Technical Committee 209, IESTcite web… …   Wikipedia

  • ISO 14644-4 — ISO 14644, Cleanrooms and associated controlled environments Part 4: Design, construction and start up, was submitted as an American National Standard in 2001.cite web title=ISO 14644 4 Scope publisher=IEST year=Last updated 2007 12 03… …   Wikipedia

  • ISO 14644-9 — ISO 14644 9, Cleanrooms and associate controlled environments Part 9: Classification of surface particle cleanliness, is currently a Committee Draft and is not yet available as a Standard. cite web title=ISO 14644 9 Scope publisher=IEST year=Last …   Wikipedia

  • ISO 14644-2:2000 — изд.1 D TC 209 Помещения чистые и связанные с ними контролируемые среды. Часть 2. Технические требования к испытанию и мониторингу для проверки постоянного соответствия стандарту ИСО 14644 1 раздел 13.040.35 …   Стандарты Международной организации по стандартизации (ИСО)

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”