Direct Part Marking

Direct Part Marking

Direct Part Marking (DPM) is a process to permanently mark parts with a barcode. This is done to allow the tracking of parts through the full life cycle.

The interpretation of 'permanent' often depends on the context the part is used. In the aerospace industry an aircraft part may be in service for over 30 years. Within telecom and computer industries the life cycle may only lasts a few years.

DPM is often used by automotive, aerospace, and electronic manufacturers to facilitate a reliable identification of their parts. This can assist in data logging for safety, warranty issues and satisfy regulatory requirements. Also the United States Department of Defense demands a physical mark on tangible assets in conjunction with the Item Unique Identification.

Barcode Types

They are many way to encode an information to a machine-readable code. The preferred code are the Data Matrix and the QR Code. Data Matrix is used by Motorola [http://www.mmh.com/article/CA6437021.html Direct part marking: The next hot trend in automatic identification] . It is also preferred by NASA to mark parts. In the automotive industries also the QR Code is used. This is founded in the fact that this code was initially developed by Denso Wave (a global automotive components manufacturer) for tracking parts in vehicle manufacturing.

Marking Methods

Methods to produce a permanent mark on parts are:
* Abrasive blasting
* Adhesive dispensing
* Cast, forge or mold
* Dot peen
* Electro-chemical etching
* Embroidery
* Engraving/milling
* Laser marking
* LaserShot peeing
* Lique metal jet
* Stencil (mechanical cut, photo process, laser cut)

Other methods like manual metal stamp, vibro-etch and embossing were not suitable to successfully apply micro size (1/32- to 15/64-inch square), high density machine-readable symbols. [http://standards.nasa.gov/released/6000/NASA-STD-6002A.pdf NASA-STD-6002A]

Marking Method Selection Factors

The marking method depends on a number of different factors:
* Part functiony
Non-intrusive marking methods are recommended for parts used in safety critical applications like aircraft engines or high pressure and high stress systems.
* Part geometry
It is more difficult to place a Data Matrix on a curved surface than it is on a flat surface.
* Surface
Highly polished metal surfaces should be textured to reduce glare prior to marking. The textured area should extend one symbol width beyond the borders of marking.
* Part Size
When a 2D Symbol is used, the size of the part is not a relevant factor as the available marking area is reduced to below 1/4 inch square.
* Operating environment / age life
It should be controlled, if the used marking method can survive in its intended environment and remain readable for the life cycle of the part.
* Surface roughness / Finish
A rough surface is not suitable for a 2D barcode as the data elements can be recognized appropriately. The surface roughness levels should be limited to 8 micro-inches. The surface roughness depends on the processing method
* Surface thickness
Surface thickness must be taken into account when applying intrusive markings to prevent deformation or excessive weakening of the part. In most applications the marking depth should not exceed 1/10 the thickness of the part.

tandards and regulations

* [http://standards.nasa.gov/released/6000/NASA-STD-6002A.pdf NASA-STD-6002A, Applying Data Matrix identification symbols on aerospace parts]

Notes and references


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Direct Part Marking — Saltar a navegación, búsqueda Ejemplo de Data Matrix marcado sobre la superficie Marcado en la propia pieza (del inglés Direct Part Marking DPM) es un proceso para marcar de forma indeleble y permanente, las piezas con un código en 1D ó 2D… …   Wikipedia Español

  • Direct part marking — An example of a Data Matrix marked on the surface Direct Part Marking (DPM) is a process to permanently mark parts with a barcode. This is done to allow the tracking of parts through the full life cycle. The interpretation of permanent often… …   Wikipedia

  • Marking — Contents 1 Animals 2 Lights 3 Linguistics 4 Sports …   Wikipedia

  • UID-marking — Unique Identification Marking, or UID marking, is a part of the UID Compliance process mandated by the United States Department of Defense. It is a permanent marking method used to give equipment a unique ID. Marking is essential for all… …   Wikipedia

  • Double-marking language — Linguistics …   Wikipedia

  • ГОСТ Р ИСО/МЭК 19762-2-2011: Информационные технологии. Технологии автоматической идентификации и сбора данных (АИСД). Гармонизированный словарь. Часть 2. Оптические носители данных (ОНД) — Терминология ГОСТ Р ИСО/МЭК 19762 2 2011: Информационные технологии. Технологии автоматической идентификации и сбора данных (АИСД). Гармонизированный словарь. Часть 2. Оптические носители данных (ОНД) оригинал документа: 04.02.13 ( n, k)… …   Словарь-справочник терминов нормативно-технической документации

  • долговременная маркировка — 04.02.27 долговременная маркировка [ permanent marking]: Изображение, полученное с помощью интрузивного или неинтрузивного маркирования, которое должно оставаться различимым, как минимум, в течение установленного срока службы изделия. Сравнить с… …   Словарь-справочник терминов нормативно-технической документации

  • Barcode — For the taxonomic method, see DNA barcoding. A UPC A barcode symbol A barcode is an optical machine readable representation of data, which shows data about the object to which it attaches. Originally barcodes represented data by varying the… …   Wikipedia

  • DPM — is a three letter initialism, and may refer to: Contents 1 Science and technology 2 Computing 3 Business 4 People 5 …   Wikipedia

  • 2D-Barcode — Barcode Als Strichcode, Balkencode oder Barcode (engl. bar für Balken) wird eine optoelektronisch lesbare Schrift bezeichnet, die aus verschieden breiten, parallelen Strichen und Lücken besteht. Der Begriff Code steht hierbei nicht für… …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”