Dynamic programming

In mathematics and computer science, dynamic programming is a method for solving complex problems by breaking them down into simpler subproblems. It is applicable to problems exhibiting the properties of overlapping subproblems which are only slightly smaller[1] and optimal substructure (described below). When applicable, the method takes far less time than naive methods.

The key idea behind dynamic programming is quite simple. In general, to solve a given problem, we need to solve different parts of the problem (subproblems), then combine the solutions of the subproblems to reach an overall solution. Often, many of these subproblems are really the same. The dynamic programming approach seeks to solve each subproblem only once, thus reducing the number of computations. This is especially useful when the number of repeating subproblems is exponentially large.

Top-down dynamic programming simply means storing the results of certain calculations, which are later used again since the completed calculation is a sub-problem of a larger calculation. Bottom-up dynamic programming involves formulating a complex calculation as a recursive series of simpler calculations.



The term dynamic programming was originally used in the 1940s by Richard Bellman to describe the process of solving problems where one needs to find the best decisions one after another. By 1953, he refined this to the modern meaning, referring specifically to nesting smaller decision problems inside larger decisions,[2] and the field was thereafter recognized by the IEEE as a systems analysis and engineering topic. Bellman's contribution is remembered in the name of the Bellman equation, a central result of dynamic programming which restates an optimization problem in recursive form.

The word dynamic was chosen by Bellman to capture the time-varying aspect of the problems, and also because it sounded impressive.[3] The word programming referred to the use of the method to find an optimal program, in the sense of a military schedule for training or logistics. This usage is the same as that in the phrases linear programming and mathematical programming, a synonym for mathematical optimization.[4]


Figure 1. Finding the shortest path in a graph using optimal substructure; a straight line indicates a single edge; a wavy line indicates a shortest path between the two vertices it connects (other nodes on these paths are not shown); the bold line is the overall shortest path from start to goal.

Dynamic programming is both a mathematical optimization method and a computer programming method. In both contexts it refers to simplifying a complicated problem by breaking it down into simpler subproblems in a recursive manner. While some decision problems cannot be taken apart this way, decisions that span several points in time do often break apart recursively; Bellman called this the "Principle of Optimality". Likewise, in computer science, a problem that can be broken down recursively is said to have optimal substructure.

If subproblems can be nested recursively inside larger problems, so that dynamic programming methods are applicable, then there is a relation between the value of the larger problem and the values of the subproblems.[5] In the optimization literature this relationship is called the Bellman equation.

Dynamic programming in mathematical optimization

In terms of mathematical optimization, dynamic programming usually refers to simplifying a decision by breaking it down into a sequence of decision steps over time. This is done by defining a sequence of value functions V1, V2, ... Vn, with an argument y representing the state of the system at times i from 1 to n. The definition of Vn(y) is the value obtained in state y at the last time n. The values Vi at earlier times i=n-1,n-2,...,2,1 can be found by working backwards, using a recursive relationship called the Bellman equation. For i=2,...n, Vi -1 at any state y is calculated from Vi by maximizing a simple function (usually the sum) of the gain from decision i-1 and the function Vi at the new state of the system if this decision is made. Since Vi has already been calculated for the needed states, the above operation yields Vi -1 for those states. Finally, V1 at the initial state of the system is the value of the optimal solution. The optimal values of the decision variables can be recovered, one by one, by tracking back the calculations already performed.

Dynamic programming in computer programming

There are two key attributes that a problem must have in order for dynamic programming to be applicable: optimal substructure and overlapping subproblems. However, when the overlapping problems are much smaller than the original problem, the strategy is called "divide and conquer" rather than "dynamic programming". This is why mergesort, quicksort, and finding all matches of a regular expression are not classified as dynamic programming problems.

Optimal substructure means that the solution to a given optimization problem can be obtained by the combination of optimal solutions to its subproblems. Consequently, the first step towards devising a dynamic programming solution is to check whether the problem exhibits such optimal substructure. Such optimal substructures are usually described by means of recursion. For example, given a graph G=(V,E), the shortest path p from a vertex u to a vertex v exhibits optimal substructure: take any intermediate vertex w on this shortest path p. If p is truly the shortest path, then the path p1 from u to w and p2 from w to v are indeed the shortest paths between the corresponding vertices (by the simple cut-and-paste argument described in CLRS). Hence, one can easily formulate the solution for finding shortest paths in a recursive manner, which is what the Bellman-Ford algorithm does.

Overlapping subproblems means that the space of subproblems must be small, that is, any recursive algorithm solving the problem should solve the same subproblems over and over, rather than generating new subproblems. For example, consider the recursive formulation for generating the Fibonacci series: Fi = Fi-1 + Fi-2, with base case F1=F2=1. Then F43 = F42 + F41, and F42 = F41 + F40. Now F41 is being solved in the recursive subtrees of both F43 as well as F42. Even though the total number of subproblems is actually small (only 43 of them), we end up solving the same problems over and over if we adopt a naive recursive solution such as this. Dynamic programming takes account of this fact and solves each subproblem only once. Note that the subproblems must be only slightly smaller (typically taken to mean a constant additive factor[citation needed]) than the larger problem; when they are a multiplicative factor smaller the problem is no longer classified as dynamic programming.

Figure 2. The subproblem graph for the Fibonacci sequence. The fact that it is not a tree indicates overlapping subproblems.

This can be achieved in either of two ways:[citation needed]

  • Top-down approach: This is the direct fall-out of the recursive formulation of any problem. If the solution to any problem can be formulated recursively using the solution to its subproblems, and if its subproblems are overlapping, then one can easily memoize or store the solutions to the subproblems in a table. Whenever we attempt to solve a new subproblem, we first check the table to see if it is already solved. If a solution has been recorded, we can use it directly, otherwise we solve the subproblem and add its solution to the table.
  • Bottom-up approach: This is the more interesting case. Once we formulate the solution to a problem recursively as in terms of its subproblems, we can try reformulating the problem in a bottom-up fashion: try solving the subproblems first and use their solutions to build-on and arrive at solutions to bigger subproblems. This is also usually done in a tabular form by iteratively generating solutions to bigger and bigger subproblems by using the solutions to small subproblems. For example, if we already know the values of F41 and F40, we can directly calculate the value of F42.

Some programming languages can automatically memoize the result of a function call with a particular set of arguments, in order to speed up call-by-name evaluation (this mechanism is referred to as call-by-need). Some languages make it possible portably (e.g. Scheme, Common Lisp or Perl), some need special extensions (e.g. C++, see[6]). Some languages have automatic memoization built in, such as tabled Prolog and J, which supports memoization with the M. adverb[7] . In any case, this is only possible for a referentially transparent function.

Example: Mathematical optimization

Optimal consumption and saving

A mathematical optimization problem that is often used in teaching dynamic programming to economists (because it can be solved by hand[8]) concerns a consumer who lives over the periods t = 0,1,2,...,T and must decide how much to consume and how much to save in each period.

Let ct be consumption in period t, and assume consumption yields utility u(ct) = ln(ct) as long as the consumer lives. Assume the consumer is impatient, so that he discounts future utility by a factor b each period, where 0 < b < 1. Let kt be capital in period t. Assume initial capital is a given amount k0 > 0, and suppose that this period's capital and consumption determine next period's capital as k_{t+1}=Ak^a_t - c_t, where A is a positive constant and 0 < a < 1. Assume capital cannot be negative. Then the consumer's decision problem can be written as follows:

\max \sum_{t=0}^T b^t \ln(c_t) subject to k_{t+1}=Ak^a_t - c_t \geq 0 for all t = 0,1,2,...,T

Written this way, the problem looks complicated, because it involves solving for all the choice variables c0,c1,c2,...,cT and k1,k2,k3,...,kT + 1 simultaneously. (Note that k0 is not a choice variable—the consumer's initial capital is taken as given.)

The dynamic programming approach to solving this problem involves breaking it apart into a sequence of smaller decisions. To do so, we define a sequence of value functions Vt(k), for t = 0,1,2,...,T,T + 1 which represent the value of having any amount of capital k at each time t. Note that VT + 1(k) = 0, that is, there is (by assumption) no utility from having capital after death.

The value of any quantity of capital at any previous time can be calculated by backward induction using the Bellman equation. In this problem, for each t = 0,1,2,...,T, the Bellman equation is

V_t(k_t) \, = \, \max \left( \ln(c_t) + b V_{t+1}(k_{t+1}) \right) subject to k_{t+1}=Ak^a_t - c_t \geq 0

This problem is much simpler than the one we wrote down before, because it involves only two decision variables, ct and kt + 1. Intuitively, instead of choosing his whole lifetime plan at birth, the consumer can take things one step at a time. At time t, his current capital kt is given, and he only needs to choose current consumption ct and saving kt + 1.

To actually solve this problem, we work backwards. For simplicity, the current level of capital is denoted as k. VT + 1(k) is already known, so using the Bellman equation once we can calculate VT(k), and so on until we get to V0(k), which is the value of the initial decision problem for the whole lifetime. In other words, once we know VTj + 1(k), we can calculate VTj(k), which is the maximum of ln(cTj) + bVTj + 1(AkacTj), where cTj is the choice variable and Ak^a-c_{T-j} \ge 0.

Working backwards, it can be shown that the value function at time t = Tj is

V_{T-j}(k) \, = \, a \sum_{i=0}^j a^ib^i \ln k + v_{T-j}

where each vTj is a constant, and the optimal amount to consume at time t = Tj is

c_{T-j}(k) \, = \, \frac{1}{\sum_{i=0}^j a^ib^i} Ak^a

which can be simplified to

c_{T}(k) \, = \, Ak^a, and c_{T-1}(k) \, = \, \frac{Ak^a}{1+ab}, and c_{T-2}(k) \, = \, \frac{Ak^a}{1+ab+a^2b^2}, etc.

We see that it is optimal to consume a larger fraction of current wealth as one gets older, finally consuming all remaining wealth in period T, the last period of life.

Examples: Computer algorithms

Dijkstra's algorithm for the shortest path problem

From a dynamic programming point of view, Dijkstra's algorithm for the shortest path problem is a successive approximation scheme that solves the dynamic programming functional equation for the shortest path problem by the Reaching method.[9][10][11]

In fact, Dijkstra's explanation of the logic behind the algorithm,[12] namely

Problem 2. Find the path of minimum total length between two given nodes P and Q.

We use the fact that, if R is a node on the minimal path from P to Q, knowledge of the latter implies the knowledge of the minimal path from P to R.

is a paraphrasing of Bellman's famous Principle of Optimality in the context of the shortest path problem.

Fibonacci sequence

Here is a naïve implementation of a function finding the nth member of the Fibonacci sequence, based directly on the mathematical definition:

   function fib(n)
       if n = 0 return 0
       if n = 1 return 1
       return fib(n − 1) + fib(n − 2)

Notice that if we call, say, fib(5), we produce a call tree that calls the function on the same value many different times:

  1. fib(5)
  2. fib(4) + fib(3)
  3. (fib(3) + fib(2)) + (fib(2) + fib(1))
  4. ((fib(2) + fib(1)) + (fib(1) + fib(0))) + ((fib(1) + fib(0)) + fib(1))
  5. (((fib(1) + fib(0)) + fib(1)) + (fib(1) + fib(0))) + ((fib(1) + fib(0)) + fib(1))

In particular, fib(2) was calculated three times from scratch. In larger examples, many more values of fib, or subproblems, are recalculated, leading to an exponential time algorithm.

Now, suppose we have a simple map object, m, which maps each value of fib that has already been calculated to its result, and we modify our function to use it and update it. The resulting function requires only O(n) time instead of exponential time:

   var m := map(0 → 0, 1 → 1)
   function fib(n)
       if map m does not contain key n
           m[n] := fib(n − 1) + fib(n − 2)
       return m[n]

This technique of saving values that have already been calculated is called memoization; this is the top-down approach, since we first break the problem into subproblems and then calculate and store values.

In the bottom-up approach we calculate the smaller values of fib first, then build larger values from them. This method also uses O(n) time since it contains a loop that repeats n − 1 times, however it only takes constant (O(1)) space, in contrast to the top-down approach which requires O(n) space to store the map.

   function fib(n)
       var previousFib := 0, currentFib := 1
       if n = 0
           return 0
       else repeat n − 1 times  //loop is skipped if n=1
           var newFib := previousFib + currentFib
           previousFib := currentFib
           currentFib  := newFib
       return currentFib

In both these examples, we only calculate fib(2) one time, and then use it to calculate both fib(4) and fib(3), instead of computing it every time either of them is evaluated. (Note the calculation of the Fibonacci sequence is used to demonstrate dynamic programming. An O(1) formula, known as Binet's formula, exists from which an arbitrary term can be calculated, which is more efficient than any dynamic programming technique.)

A type of balanced 0-1 matrix

Consider the problem of assigning values, either zero or one, to the positions of an n × n matrix, n even, so that each row and each column contains exactly n / 2 zeros and n / 2 ones. We ask how many different assignments there are for a given n. For example, when n = 4, four possible solutions are

0 & 1 & 0 & 1 \\
1 & 0 & 1 & 0 \\
0 & 1 & 0 & 1 \\
1 & 0 & 1 & 0
\end{bmatrix} \text{ and } \begin{bmatrix}
0 & 0 & 1 & 1 \\
0 & 0 & 1 & 1 \\
1 & 1 & 0 & 0 \\
1 & 1 & 0 & 0
\end{bmatrix} \text{ and } \begin{bmatrix}
1 & 1 & 0 & 0 \\
0 & 0 & 1 & 1 \\
1 & 1 & 0 & 0 \\
0 & 0 & 1 & 1
\end{bmatrix} \text{ and } \begin{bmatrix}
1 & 0 & 0 & 1 \\
0 & 1 & 1 & 0 \\
0 & 1 & 1 & 0 \\
1 & 0 & 0 & 1

There are at least three possible approaches: brute force, backtracking, and dynamic programming.

Brute force consists of checking all assignments of zeros and ones and counting those that have balanced rows and columns (n / 2 zeros and n / 2 ones). As there are \tbinom{n}{n/2}^n possible assignments, this strategy is not practical except maybe up to n = 6.

Backtracking for this problem consists of choosing some order of the matrix elements and recursively placing ones or zeros, while checking that in every row and column the number of elements that have not been assigned plus the number of ones or zeros are both at least n / 2. While more sophisticated than brute force, this approach will visit every solution once, making it impractical for n larger than six, since the number of solutions is already 116963796250 for n = 8, as we shall see.

Dynamic programming makes it possible to count the number of solutions without visiting them all. Imagine backtracking values for the first row - what information would we require about the remaining rows, in order to be able to accurately count the solutions obtained for each first row values? We consider k × n boards, where 1 ≤ kn, whose k rows contain n / 2 zeros and n / 2 ones. The function f to which memoization is applied maps vectors of n pairs of integers to the number of admissible boards (solutions). There is one pair for each column and its two components indicate respectively the number of ones and zeros that have yet to be placed in that column. We seek the value of  f((n/2, n/2), (n/2, n/2), \ldots (n/2, n/2)) (n arguments or one vector of n elements). The process of subproblem creation involves iterating over every one of \tbinom{n}{n/2} possible assignments for the top row of the board, and going through every column, subtracting one from the appropriate element of the pair for that column, depending on whether the assignment for the top row contained a zero or a one at that position. If any one of the results is negative, then the assignment is invalid and does not contribute to the set of solutions (recursion stops). Otherwise, we have an assignment for the top row of the k × n board and recursively compute the number of solutions to the remaining (k - 1) × n board, adding the numbers of solutions for every admissible assignment of the top row and returning the sum, which is being memoized. The base case is the trivial subproblem, which occurs for a 1 × n board. The number of solutions for this board is either zero or one, depending on whether the vector is a permutation of n / 2 (0,1) and n / 2 (1,0) pairs or not.

For example, in the two boards shown above the sequences of vectors would be

((2, 2) (2, 2) (2, 2) (2, 2))       ((2, 2) (2, 2) (2, 2) (2, 2))     k = 4
  0      1      0      1              0      0      1      1

((1, 2) (2, 1) (1, 2) (2, 1))       ((1, 2) (1, 2) (2, 1) (2, 1))     k = 3
  1      0      1      0              0      0      1      1

((1, 1) (1, 1) (1, 1) (1, 1))       ((0, 2) (0, 2) (2, 0) (2, 0))     k = 2
  0      1      0      1              1      1      0      0

((0, 1) (1, 0) (0, 1) (1, 0))       ((0, 1) (0, 1) (1, 0) (1, 0))     k = 1
  1      0      1      0              1      1      0      0

((0, 0) (0, 0) (0, 0) (0, 0))       ((0, 0) (0, 0), (0, 0) (0, 0))

The number of solutions (sequence A058527 in OEIS) is

 1,\, 2,\,  90,\, 297200,\, 116963796250,\, 6736218287430460752, \ldots

Links to the MAPLE implementation of the dynamic programming approach may be found among the external links.


Consider a checkerboard with n × n squares and a cost-function c(i, j) which returns a cost associated with square i, j (i being the row, j being the column). For instance (on a 5 × 5 checkerboard),

5 6 7 4 7 8
4 7 6 1 1 4
3 3 5 7 8 2
2 - 6 7 0 -
1 - - *5* - -
1 2 3 4 5

Thus c(1, 3) = 5

Let us say you had a checker that could start at any square on the first rank (i.e., row) and you wanted to know the shortest path (sum of the costs of the visited squares are at a minimum) to get to the last rank, assuming the checker could move only diagonally left forward, diagonally right forward, or straight forward. That is, a checker on (1,3) can move to (2,2), (2,3) or (2,4).

2 x x x
1 o
1 2 3 4 5

This problem exhibits optimal substructure. That is, the solution to the entire problem relies on solutions to subproblems. Let us define a function q(i, j) as

q(i, j) = the minimum cost to reach square (i, j)

If we can find the values of this function for all the squares at rank n, we pick the minimum and follow that path backwards to get the shortest path.

Note that q(i, j) is equal to the minimum cost to get to any of the three squares below it (since those are the only squares that can reach it) plus c(i, j). For instance:

4 A
3 B C D
1 2 3 4 5

q(A) = min(q(B),q(C),q(D)) + c(A)

Now, let us define q(i, j) in somewhat more general terms:

q(i,j)=\begin{cases} \infty & j < 1 \mbox{ or }j > n \\ c(i, j) & i = 1 \\ \min(q(i-1, j-1), q(i-1, j), q(i-1, j+1)) + c(i,j) & \mbox{otherwise.}\end{cases}

The first line of this equation is there to make the recursive property simpler (when dealing with the edges, so we need only one recursion). The second line says what happens in the last rank, to provide a base case. The third line, the recursion, is the important part. It is similar to the A,B,C,D example. From this definition we can make a straightforward recursive code for q(i, j). In the following pseudocode, n is the size of the board, c(i, j) is the cost-function, and min() returns the minimum of a number of values:

function minCost(i, j)
    if j < 1 or j > n
        return infinity
    else if i = 1
        return c(i, j)
        return min( minCost(i-1, j-1), minCost(i-1, j), minCost(i-1, j+1) ) + c(i, j)

It should be noted that this function only computes the path-cost, not the actual path. We will get to the path soon. This, like the Fibonacci-numbers example, is horribly slow since it spends mountains of time recomputing the same shortest paths over and over. However, we can compute it much faster in a bottom-up fashion if we store path-costs in a two-dimensional array q[i, j] rather than using a function. This avoids recomputation; before computing the cost of a path, we check the array q[i, j] to see if the path cost is already there.

We also need to know what the actual shortest path is. To do this, we use another array p[i, j], a predecessor array. This array implicitly stores the path to any square s by storing the previous node on the shortest path to s, i.e. the predecessor. To reconstruct the path, we lookup the predecessor of s, then the predecessor of that square, then the predecessor of that square, and so on, until we reach the starting square. Consider the following code:

 function computeShortestPathArrays()
     for x from 1 to n
         q[1, x] := c(1, x)
     for y from 1 to n
         q[y, 0]     := infinity
         q[y, n + 1] := infinity
     for y from 2 to n
         for x from 1 to n
             m := min(q[y-1, x-1], q[y-1, x], q[y-1, x+1])
             q[y, x] := m + c(y, x)
             if m = q[y-1, x-1]
                 p[y, x] := -1
             else if m = q[y-1, x]
                 p[y, x] :=  0
                 p[y, x] :=  1

Now the rest is a simple matter of finding the minimum and printing it.

 function computeShortestPath()
     minIndex := 1
     min := q[n, 1]
     for i from 2 to n
         if q[n, i] < min
             minIndex := i
             min := q[n, i]
     printPath(n, minIndex)
 function printPath(y, x)
     if y = 2
         print(x + p[y, x])
         printPath(y-1, x + p[y, x])

Sequence alignment

In genetics, sequence alignment is an important application where dynamic programming is essential.[3] Typically, the problem consists of transforming one sequence into another using edit operations that replace, insert, or remove an element. Each operation has an associated cost, and the goal is to find the sequence of edits with the lowest total cost.

The problem can be stated naturally as a recursion, a sequence A is optimally edited into a sequence B by either:

  1. inserting the first character of B, and performing an optimal alignment of A and the tail of B
  2. deleting the first character of A, and performing the optimal alignment of the tail of A and B
  3. replacing the first character of A with the first character of B, and performing optimal alignments of the tails of A and B.

The partial alignments can be tabulated in a matrix, where cell (i,j) contains the cost of the optimal alignment of A[1..i] to B[1..j]. The cost in cell (i,j) can be calculated by adding the cost of the relevant operations to the cost of its neighboring cells, and selecting the optimum.

Different variants exist, see Smith-Waterman and Needleman-Wunsch.

Tower of Hanoi Puzzle

A model set of the Towers of Hanoi (with 8 disks)
An animated solution of the Tower of Hanoi puzzle for T(4,3).

The Tower of Hanoi or Towers of Hanoi is a mathematical game or puzzle. It consists of three rods, and a number of disks of different sizes which can slide onto any rod. The puzzle starts with the disks in a neat stack in ascending order of size on one rod, the smallest at the top, thus making a conical shape.

The objective of the puzzle is to move the entire stack to another rod, obeying the following rules:

  • Only one disk may be moved at a time.
  • Each move consists of taking the upper disk from one of the rods and sliding it onto another rod, on top of the other disks that may already be present on that rod.
  • No disk may be placed on top of a smaller disk.

The dynamic programming solution consists of solving the functional equation

S(n,h,t) = S(n-1,h, not(h,t)) ; S(1,h,t) ; S(n-1,not(h,t),t)

where n denotes the number of disks to be moved, h denotes the home rod, t denotes the target rod, not(h,t) denotes the third rod (neither h nor t), ";" denotes concatenation, and

S(n, h, t) := solution to a problem consisting of n disks that are to be moved from rod h to rod t.

Note that for n=1 the problem is trivial, namely S(1,h,t) = "move a disk from rod h to rod t" (there is only one disk left).

The number of moves required by this solution is 2n -1. If the objective is to maximize the number of moves (without cycling) then the dynamic programming functional equation is slightly more complicated and 3n -1 moves are required.[13]

Egg dropping puzzle

The following is a description of the instance of this famous puzzle involving n=2 eggs and a building with H=36 floors:[14]

Suppose that we wish to know which stories in a 36-story building are safe to drop eggs from, and which will cause the eggs to break on landing. We make a few assumptions:
  • An egg that survives a fall can be used again.
  • A broken egg must be discarded.
  • The effect of a fall is the same for all eggs.
  • If an egg breaks when dropped, then it would break if dropped from a higher window.
  • If an egg survives a fall then it would survive a shorter fall.
  • It is not ruled out that the first-floor windows break eggs, nor is it ruled out that the 36th-floor windows do not cause an egg to break.
If only one egg is available and we wish to be sure of obtaining the right result, the experiment can be carried out in only one way. Drop the egg from the first-floor window; if it survives, drop it from the second floor window. Continue upward until it breaks. In the worst case, this method may require 36 droppings. Suppose 2 eggs are available. What is the least number of egg-droppings that is guaranteed to work in all cases?

To derive a dynamic programming functional equation for this puzzle, let the state of the dynamic programming model be a pair s = (n,k), where

n = number of test eggs available, n = 0,1,2,3,...,N-1.
k = number of (consecutive) floors yet to be tested, k = 0,1,2,...,H-1.

For instance, s = (2,6) indicates that 2 test eggs are available and 6 (consecutive) floors are yet to be tested. The initial state of the process is s = (N,H) where N denotes the number of test eggs available at the commencement of the experiment. The process terminates either when there are no more test eggs (n = 0) or when k = 0, whichever occurs first. If termination occurs at state s=(0,k) and k>0, then the test failed.

Now, let

W(n,k) := minimum number of trials required to identify the value of the critical floor under the Worst Case Scenario given that the process is in state s=(n,k).

Then it can be shown that[15]

W(n,k) = 1 + min{max(W(n-1,x-1) , W(n,k-x)): x in {1,2,...,k}} , n = 2,...,N ; k = 2,3,4,...,H

with W(n,1) = 1 for all n>0 and W(1,k) = k for all k. It is easy to solve this equation iteratively by systematically increasing the values of n and k.

An interactive online facility is available for experimentation with this model as well as with other versions of this puzzle (e.g. when the objective is to minimize the expected value of the number of trials.[15]

Algorithms that use dynamic programming

See also


  1. ^ S. Dasgupta, C.H. Papadimitriou, and U.V. Vazirani, 'Algorithms', p173, available at http://www.cs.berkeley.edu/~vazirani/algorithms.html
  2. ^ http://www.wu-wien.ac.at/usr/h99c/h9951826/bellman_dynprog.pdf
  3. ^ a b Eddy, S. R., What is dynamic programming?, Nature Biotechnology, 22, 909-910 (2004).
  4. ^ Nocedal, J.; Wright, S. J.: Numerical Optimization, page 9, Springer, 2006..
  5. ^ Cormen, T. H.; Leiserson, C. E.; Rivest, R. L.; Stein, C. (2001), Introduction to Algorithms (2nd ed.), MIT Press & McGraw-Hill, ISBN 0-262-03293-7 . pp. 327–8.
  6. ^ http://www.apl.jhu.edu/~paulmac/c++-memoization.html
  7. ^ "M. Memo". J Vocabulary. J Software. http://www.jsoftware.com/help/dictionary/dmcapdot.htm. Retrieved 28 October 2011. 
  8. ^ Stokey et al., 1989, Chap. 1
  9. ^ Sniedovich, M. (2006), "Dijkstra’s algorithm revisited: the dynamic programming connexion" (PDF), Journal of Control and Cybernetics 35 (3): 599–620, http://matwbn.icm.edu.pl/ksiazki/cc/cc35/cc3536.pdf.  Online version of the paper with interactive computational modules.
  10. ^ Denardo, E.V. (2003), Dynamic Programming: Models and Applications, Mineola, NY: Dover Publications, ISBN 978-0486428109 
  11. ^ Sniedovich, M. (2010), Dynamic Programming: Foundations and Principles, Taylor & Francis, ISBN 9780824740993 
  12. ^ Dijkstra 1959, p. 270
  13. ^ Moshe Sniedovich (2002), "OR/MS Games: 2. The Towers of Hanoi Problem,", INFORMS Transactions on Education 3(1): 34–51, http://archive.ite.journal.informs.org/Vol3No1/Sniedovich/. 
  14. ^ Konhauser J.D.E., Velleman, D., and Wagon, S. (1996). Which way did the Bicycle Go? Dolciani Mathematical Expositions -- No-18. The Mathematical Association of America.
  15. ^ a b Sniedovich, M. (2003). The joy of egg-dropping in Braunschweig and Hong Kong. INFORMS Transactions on Education, 4(1) 48-64.

Further reading

External links

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Dynamic programming — Dynamische Programmierung ist ein Paradigma zum algorithmischen Lösen von Optimierungsproblemen. Der Begriff wurde in den 1940er Jahren von dem amerikanischen Mathematiker Richard Bellman eingeführt, der diese Methode auf dem Gebiet der… …   Deutsch Wikipedia

  • dynamic programming — dinaminis programavimas statusas T sritis automatika atitikmenys: angl. dynamic programming vok. dynamische Programmierung, f rus. динамическое программирование, n pranc. programmation dynamique, f …   Automatikos terminų žodynas

  • Dynamic programming language — This article is about a class of programming languages, for the method for reducing the runtime of algorithms, see Dynamic programming. Dynamic programming language is a term used broadly in computer science to describe a class of high level… …   Wikipedia

  • Dynamic time warping — Not to be confused with the Time Warp mechanism for discrete event simulation, or the Time Warp Operating System that used this mechanism. Dynamic time warping (DTW) is an algorithm for measuring similarity between two sequences which may vary in …   Wikipedia

  • Dynamic lot size model — In inventory theory the Dynamic lot size model is a generalization of the economic order quantity model that takes into account that demand for the product varies over time. The model was introduced by H.M. Wagner and T.H. Whitin in 1958. Problem …   Wikipedia

  • Programming language — lists Alphabetical Categorical Chronological Generational A programming language is an artificial language designed to communicate instructions to a machine, particularly a computer. Programming languages can be used to create programs that… …   Wikipedia

  • Dynamic compilation — is a process used by some programming language implementations to gain performance during program execution. Although the technique originated in the Self programming language,[citation needed] the best known language that uses this technique is… …   Wikipedia

  • Dynamic loading — is a mechanism by which a computer program can, at run time, load a library (or other binary) into memory, retrieve the addresses of functions and variables contained in the library, execute those functions or access those variables, and unload… …   Wikipedia

  • Dynamic Systems Development Method — (DSDM) is a software development approach originally based upon the Rapid Application Development (RAD) methodology. DSDM is an iterative and incremental approach that emphasizes continuous user involvement. Its goal is to deliver software… …   Wikipedia

  • Programming paradigm — Programming paradigms Agent oriented Automata based Component based Flow based Pipelined Concatenative Concu …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”