Carbon in pulp

Carbon in pulp

Carbon in Pulp (CIP) is a technique for recovery of gold which has been liberated into a cyanide solution as part of the gold cyanidation process, a gold extraction technique.

Introduced in 1985, Carbon in Pulp is regarded as a simple and cheap process. As such it is used in most industrial applications where the presence of competing silver or copper does not prohibit its use.

Activated carbon acts like a sponge to aurocyanide and other complex ions in solution. Hard carbon particles (much larger than the ore particle sizes) can be mixed with the ore and cyanide solution mixture. The gold cyanide complex is adsorbed onto the carbon until it comes to an equilibrium with the gold in solution. Because the carbon particles are much larger than the ore particles, the coarse carbon can then be separated from the slurry by screening using a wire mesh.

Loading gold into carbon

Leached pulp and carbon are transferred in a counter current flow arrangement between a series of tanks, usually numbering 4 to 6. In the final tank, fresh or "barren" carbon is put in contact with low grade or tailings solution. At this tank the fresh carbon has a high activity and can remove trace amounts of gold (to levels below 0.01 mg/L Au in solution).

As it moves up the train, the carbon loads to higher and higher concentrations of gold, as it comes in contact with higher grade solutions. Typically concentrations as high as 4000 to 8000 grams of gold per tonne of carbon (g/t Au) can be achieved on the final loaded carbon, as it comes in contact with freshly leached ore and pregnant leach solution (PLS). This can be measured by comparing the amount of gold extracted from the carbon to the amount of carbon used.

Removal of gold from carbon

The final loaded carbon then is removed and washed before undergoing "elution" or desorption of gold cyanide at high temperature and pH.
Ethanol can also be used to desorb gold from activated carbon, but safety concerns have slowed its acceptance in the gold extraction industry.

Electrowinning

The rich eluate solution that emerges from the elution process is passed through electrowinning cells where gold and other metals are precipitated onto the cathodes.
Smelting of the cathodes material further refines the gold and produces gold ingots suitable for transport a refinery. For further information on gold smelting, see the article on gold extraction.

ee also

Other gold cyanidation techniques:
*Merrill-Crowe process
*Electrowinning
*Resin in Pulp


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • carbon-in-pulp — /kabən ɪn ˈpʌlp/ (say kahbuhn in pulp) noun an extraction process for the recovery of gold which has been dissolved in cyanide solution, the gold cyanide complex being absorbed by the carbon particles which are much larger than the gold and can… …  

  • Carbon sink — A carbon sink is reservoir of carbon that accumulates and stores carbon for an indefinite period. The main natural sinks are: # Absorption of carbon dioxide by the oceans # Photosynthesis by plants and algae The process by which carbon sinks… …   Wikipedia

  • Carbon tax — Part of a series on Green economics Concepts …   Wikipedia

  • Bleaching of wood pulp — is the chemical processing carried out on various types of wood pulp to decrease the color of the pulp, so that it becomes whiter. The main use of wood pulp is to make paper where whiteness (similar to but not exactly the same as brightness ) is… …   Wikipedia

  • Low-carbon economy — Part of a series on Green economics Concepts …   Wikipedia

  • Wood pulp — is a dry fibrous material prepared by chemically or mechanically separating the fibers which make up wood. Pulp can be either fluffy or formed into thick sheets. The latter form is used if the pulp must be transported from the pulp mill to a… …   Wikipedia

  • Asia Pulp & Paper — Asia Pulp Paper, based in Singapore, is one of the largest pulp and paper companies in the world. It can produce about 2 million tons of pulp and more than 5 million tons of paper and packaging materials per year. Part of the Sinar Mas Group, it… …   Wikipedia

  • CIP — carbon in pulp …  

  • Gold cyanidation — (also known as the cyanide process or the MacArthur Forrest process) is a metallurgical technique for extracting gold from low grade ore by converting the gold to a water soluble coordination complex. It is the most commonly used process for gold …   Wikipedia

  • Tailings — A panorama of Broken Hill, New South Wales, backed by the man made mullock (waste tailings) heaps from the Line of Lode mine (the mullock heaps are the hills that stretch across this image). Tailings, also called mine dumps, slimes, tails, leach… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”