Critical state soil mechanics

Critical state soil mechanics
Normally consolidated soil goes to critical state along the stress path on Roscoe surface

Critical State Soil Mechanics is the area of Soil Mechanics that encompasses the conceptual models that represent the mechanical behavior of saturated remolded soils based on the Critical State concept.

Contents

Formulation

The Critical State concept is an idealization of the observed behavior of saturated remoulded clays in triaxial compression tests, and it is assumed to apply to undisturbed soils. It states that soils and other granular materials, if continuously distorted (sheared) until they flow as a frictional fluid, will come into a well-defined critical state. At the onset of the critical state, shear distortions \ \varepsilon_s occur without any further changes in mean effective stress \ p', deviatoric stress \ q (or yield stress, \ \sigma_y, in uniaxial tension according to the von Mises yielding criterion), or specific volume \ \nu:

\ \frac{\partial p'}{\partial \varepsilon_s}=\frac{\partial q}{\partial \varepsilon_s}=\frac{\partial \nu}{\partial \varepsilon_s}=0

where,

\ \nu=1+e
\ p'=\frac{1}{3}(\sigma_1'+\sigma_2'+\sigma_3')
\ q= \sqrt{\frac{(\sigma_1' - \sigma_2')^2 + (\sigma_2' - \sigma_3')^2 + (\sigma_1' - \sigma_3')^2}{2}}

However, for triaxial conditions \ \sigma_2'=\sigma_3'. Thus,

\ p'=\frac{1}{3}(\sigma_1'+2\sigma_3')
\ q=(\sigma_1'-\sigma_3')

All critical states, for a given soil, form a unique line called the Critical State Line (CSL) defined by the following equations in the space \ (p', q, v):

\ q=Mp'
\ \nu=\Gamma-\lambda \ln(p')

where \ M, \ \Gamma, and \ \lambda are soil constants. The first equation determines the magnitude of the deviatoric stress \ q needed to keep the soil flowing continuously as the product of a frictional constant \ M (capital \ \mu) and the mean effective stress \ p'. The second equation states that the specific volume \ \nu occupied by unit volume of flowing particles will decrease as the logarithm of the mean effective stress increases.


History

In an attempt to advance soil testing techniques, Kenneth Harry Roscoe of Cambridge University, in the late forties and early fifties, developed a simple shear apparatus in which his successive students attempted to study the changes in conditions in the shear zone both in sand and in clay soils. In 1958 a study of the yielding of soil based on some Cambridge data of the simple shear apparatus tests, and on much more extensive data of triaxial tests at Imperial College London from research led by Professor Sir Alec Skempton at the Imperial Geotechnical Laboratories, led to the publication of the critical state concept (Roscoe, Schofield & Wroth 1958).

Roscoe obtained his undergraduate degree in mechanical engineering[1] and his experiences trying to create tunnels to escape when held as a prisoner of war by the Nazis during WWII introduced him to soil mechanics[1]. Subsequent to this 1958 paper, concepts of plasticity were introduced by Schofield and publa classic text book (Schofield & Wroth 1968). Schofield was taught at Cambridge by Prof. John Baker, a structural engineer who was a strong believer in designing structures that would fail "plastically". Prof. Baker's theories strongly influenced Schofield's thinking on soil shear. Prof. Baker's views were developed from his pre-war work on steel structures and further informed by his wartime experiences assessing blast-damaged structures and with the design of the "Morrison Shelter", an air-raid shelter which could be located indoors (Schofield 2006).

Original Cam-Clay Model

The Original Cam-Clay model is based on the assumption that the soil is isotropic, elasto-plastic, deforms as a continuum, and it is not affected by creep. The yield surface of the Cam clay model is described by a log arc.

Modified Cam-Clay Model

Professor John Burland of Imperial College who worked with Professor Roscoe is credited with the development of the modified version of the original model. The difference between the Cam Clay and the Modified Cam Clay [2] (MCC) is that the yield surface of the MCC is described by an ellipse and therefore the plastic strain increment vector (which is vertical to the yield surface) for the largest value of the mean effective stress is horizontal, and hence no incremental deviatoric plastic strain takes place for a change in mean effective stress. This is very convenient for constitutive modelling in numerical analysis, especially finite element analysis, where numerical stability issues are important (as a curve needs to be continuous in order to be differentiable).

Notes

  1. ^ a b Oxford Dictionary of National Biography, 1961-1970, entry on Roscoe, Kenneth Harry, pp 894-896
  2. ^ Roscoe K.H. and Burland J.B., 1968, On the generalised stress-strain behaviour of ‘wet’ clay, Eng. plasticity, Cambridge Univ. Press, 535-609

References


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Soil mechanics — is a discipline that applies principles of engineering mechanics, e.g. kinematics, dynamics, fluid mechanics, and mechanics of material, to predict the mechanical behavior of soils. Together with Rock mechanics, it is the basis for solving many… …   Wikipedia

  • Shear strength (soil) — Shear strength in reference to soil is a term used to describe the maximum strength of soil at which point significant plastic deformation or yielding occurs due to an applied shear stress. There is no definitive shear strength of a soil as it… …   Wikipedia

  • Soil science — is the study of soil as a natural resource on the surface of the earth including soil formation, classification and mapping; physical, chemical, biological, and fertility properties of soils; and these properties in relation to the use and… …   Wikipedia

  • Soil — For other uses, see Soil (disambiguation). A represents soil; B represents laterite, a regolith; C represents saprolite, a less weathered regolith; the bottommost layer represents bedrock …   Wikipedia

  • soil — soil1 soilless, adj. /soyl/, n. 1. the portion of the earth s surface consisting of disintegrated rock and humus. 2. a particular kind of earth: sandy soil. 3. the ground as producing vegetation or as cultivated for its crops: fertile soil. 4. a… …   Universalium

  • solids, mechanics of — ▪ physics Introduction       science concerned with the stressing (stress), deformation (deformation and flow), and failure of solid materials and structures.       What, then, is a solid? Any material, fluid or solid, can support normal forces.… …   Universalium

  • Charles Peter Wroth — Charles Peter Wroth[1], meist zitiert C. P. Wroth, (* 1929; † 3. Februar 1991) war ein britischer Geotechniker. Inhaltsverzeichnis 1 Leben 2 Literatur 3 Weblinks …   Deutsch Wikipedia

  • John H. Atkinson — ist ein britischer Bauingenieur (Geotechnik). Atkinson studierte Bauingenieurwesen und Bodenmechanik am Imperial College in London. Danach forschte er an der Universität Cambridge und war Senior Lecturer am University College Cardiff, bevor er… …   Deutsch Wikipedia

  • Kenneth Harry Roscoe — (* Dezember 1914; † 10. April 1970) war ein britischer Bauingenieur, der sich mit Grundbau und Bodenmechanik beschäftigte Roscoe ging in Newcastle under Lyme in die Schule und studierte ab 1934 an der Universität Cambridge (Emmanuel College)… …   Deutsch Wikipedia

  • Andrew Noel Schofield — Professor A. N. Schofield am 8. November 2010 Andrew Noel Schofield (* 1. November 1930) ist ein britischer Bauingenieur, der sich mit Grundbau und Bodenmechanik beschäftigt. Schofield studierte in Cambridge Bauingenieurwesen und war 1951 bis… …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”