Strengthening mechanisms of materials

Strengthening mechanisms of materials

Methods have been devised to modify the yield strength, ductility, and toughness of both crystalline and amorphous materials. These strengthening mechanisms give engineers the ability to tailor the mechanical properties of materials to suit a variety of different applications. For example, the favorable properties of steel result from interstitial incorporation of carbon into the iron lattice. Brass, a binary alloy of copper and zinc, has superior mechanical properties compared to its constituent metals due to solution strengthening. Work hardening (such as beating a red-hot piece of metal on anvil) has also been used for centuries by blacksmiths to introduce dislocations into materials, increasing their yield strengths.

What is Strengthening?

Plastic deformation occurs when large numbers of dislocations move and multiply so as to result in macroscopic deformation. In other words, it is the movement of dislocations in the material which allows for deformation. If we want to enhance a material's mechanical properties (i.e. increase the yield and tensile strength), we simply need to introduce a mechanism which prohibits the mobility of these dislocations. [Callister, William Jr, Materials Science and Engineering, An Introduction. John Wiley & Sons, NY, NY 1985] Whatever the mechanism may be, (work hardening, grain size reduction, etc) they all hinder dislocation motion and render the material stronger than previously.

The stress required to cause dislocation motion is orders of magnitude lower than the theoretical stress required to shift an entire plane of atoms, so this mode of stress relief is energetically favorable. Hence, the hardness and strength (both yield and tensile) critically depend on the ease with which dislocations move. Pinning points, or locations in the crystal that oppose the motion of dislocations [D. Kuhlmann-Wilsdorf, "Theory of Plastic Deformation," Materials Science and Engineering A, vol 113, pp 1-42, July 1989] , can be introduced into the lattice to reduce dislocation mobility, thereby increasing mechanical strength. Dislocations may be pinned due to stress field interactions with other dislocations and solute particles, or physical barriers from grain boundaries and second phase precipitates. There are four main strengthening mechanisms for metals, however the key concept to remember about strengthening of metallic materials is that it is all about preventing dislocation motion and propagation; you are making it energetically unfavorable for the dislocation to move or propagate. For a material that has been strengthened, by some processing method, the amount of force required to start irreversible (plastic) deformation is greater than it was for the original material.

In amorphous materials such as polymers, amorphous ceramics (glass), and amorphous metals, the lack of long range order leads to yielding via mechanisms such as brittle fracture, crazing, and shear band formation. In these systems, strengthening mechanisms do not involve dislocations, but rather consist of modifications to the chemical structure and processing of the constituent material.

Unfortunately, strength of materials cannot infinitely increase. Each of the mechanisms elaborated below involves some trade off by which other material properties are compromised in the process of strengthening.

trengthening Mechanisms in Metals

Work hardening

The primary species responsible for work hardening are dislocations. Dislocations interact with each other by generating stress fields in the material. The interaction between the stress fields of dislocations can impede dislocation motion by repulsive or attractive interactions. Additionally, if two dislocations cross, dislocation line entanglement occurs, causing the formation of a jog which opposes dislocation motion. These entanglements and jogs act as pinning points, which oppose dislocation motion. As both of these processes are more likely to occur when more dislocations are present, there is a correlation between dislocation density and yield strength,

Deltasigma_{y} = {Gbsqrt{ ho_perp

where G is the shear modulus, b is the Burgers vector, and ho_perp is the dislocation density.

Increasing the dislocation density increases the yield strength which results in a higher shear stress required to move the dislocations. This process is easily observed while working a material. Theoretically, the strength of a material with no dislocations will be extremely high (τ=G/2) because plastic deformation would require the breaking of many bonds simultaneously. However, at moderate dislocation density values of around 107-109 dislocations/m2, the material will exhibit a significantly lower mechanical strength. Analogously, it is easier to move a rubber rug across a surface by propagating a small ripple through it than by dragging the whole rug. At dislocation densities of 1014 dislocations/m2 or higher, the strength of the material becomes high once again. It should be noted that the dislocation density can't be infinitely high because then the material would lose its crystalline structure.

Solid Solution Strengthening/Alloying

For this strengthening mechanism, solute atoms of one element are added to another, resulting in either substitutional or interstitial point defects in the crystal (see Figure 1). The solute atoms cause lattice distortions that impede dislocation motion, increasing the yield stress of the material. Solute atoms have stress fields around them which can interact with those of dislocations. The presence of solute atoms impart compressive or tensile stresses to the lattice, depending on solute size, which interfere with nearby dislocations, causing the solute atoms to act as potential barriers to dislocation propagation and/or multiplication.

The shear stress required to move dislocations in a material is:

Delta au = Gbsqrt{c} epsilon^{3/2}

where c is the solute concentration and epsilon is the strain on the material caused by the solute.

Increasing the concentration of the solute atoms will increase the yield strength of a material; however, there is a limit to the amount of solute that can be added, and one should look at the phase diagram for the material and the alloy to make sure that a second phase is not created.

In general, the solid solution strengthening depends on the concentration of the solute atoms, shear modulus of the solute atoms, size of solute atoms, valency of solute atoms (for ionic materials), and the symmetry of the solute stress field. Note that the magnitude of strengthening is higher for non-symmetric stress fields because these solutes can interact with both edge and screw dislocations whereas symmetric stress fields, which cause only volume change and not shape change, can only interact with edge dislocations.

Precipitation Hardening

In most binary systems, alloying above a concentration given by the phase diagram will cause the formation of a second phase. A second phase can also be created by mechanical or thermal treatments. The particles that compose the second phase precipitates act as pinning points in a similar manner to solutes, though the particles are not necessarily single atoms.

The dislocations in a material can interact with the precipitate atoms in one of two ways (see Figure 2). If the precipitate atoms are small, the dislocations would cut through them. As a result, new surfaces (b in Figure 2) of the particle would get exposed to the matrix and the particle/matrix interfacial energy would increase. For larger precipitate particles, looping or bowing of the dislocations would occur which results in dislocations getting longer. Hence, at a critical radius of about 5nm, dislocations will preferably cut across the obstacle while for a radius of 30nm, the dislocations will readily bow or loop to overcome the obstacle.

The mathematical descriptions are as follows:

For Particle Bowing- Delta au = {Gbover L-2r}

For Particle Cutting- Delta au = {gamma pi r over b L}

Grain Boundary Strengthening

In a polycrystalline metal, grain size has a tremendous influence on the mechanical properties. Because grains usually have varying crystallographic orientations, grain boundaries arise. While an undergoing deformation, slip motion will take place. Grain boundaries act as an impediment to dislocation motion for the following two reasons:

1. Dislocation must change its direction of motion due to the differing orientation of grains. [Callister, William Jr, Materials Science and Engineering, An Introduction. John Wiley & Sons, NY, NY 1985] 2. Discontinuity of slip planes from grain 1 to grain 2. [Callister, William Jr, Materials Science and Engineering, An Introduction. John Wiley & Sons, NY, NY 1985]

The stress required to move a dislocation from one grain to another in order to plastically deform a material depends on the grain size. The average number of dislocations per grain decreases with average grain size (see Figure 3). A lower number of dislocations per grain results in a lower dislocation 'pressure' building up at grain boundaries. This makes it more difficult for dislocations to move into adjacent grains. This relationship is the Hall-Petch Relationship and can be mathematically described as follows:

sigma_{y} = sigma_{y,0} + {k over {d^x ,

where k is a constant, d is the average grain diameter and sigma_{y,0} is the original yield stress.

The fact that the yield strength increases with decreasing grain size is accompanied by the caveat that the grain size cannot be decreased infinitely. As the grain size decreases, more free volume is generated resulting in lattice mismatch. However, below approximately 10 nm, the grain boundaries will tend to slide instead; a phenomenon known as grain-boundary sliding. If the grain size gets too small, it becomes more difficult to fit the dislocations in the grain and the stress required to move them is less. It was not possible to produce materials with grain sizes below 10 nm until recently, so the discovery that strength decreases below a critical grain size is still exciting.

trengthening Mechanisms in Amorphous Materials

Polymers

Polymers fracture via breaking of inter- and intra molecular bonds; hence, the chemical structure of these materials plays a huge role in increasing strength. For polymers consisting of chains which easily slide past each other, chemical and physical cross linking can be used to increase rigidity and yield strength. In thermoset polymers (thermosetting plastic), disulfide bridges and other covalent cross links give rise to a hard structure which can withstand very high temperatures. These cross-links are particularly helpful in improving tensile strength of materials which contain lots of free volume prone to crazing, typically glassy brittle polymers Meyers, Chawla. "Mechanical Behavior of Materials." Cambridge University Press. pg 420-425. 1999] . In thermoplastic elastomer, phase separation of dissimilar monomer components leads to association of hard domains within a sea of soft phase, yielding a physical structure with increased strength and rigidity. If yielding occurs by chains sliding past each other (shear bands), the strength can also be increased by introducing kinks into the polymer chains via unsaturated carbon-carbon bonds .

Increasing the bulkiness of the monomer unit via incorporation of aryl rings is another strengthening mechanism. However, the anisotropy of the molecular structure means that these mechanisms are heavily dependent on the direction of applied stress. While aryl rings drastically increase rigidity along the direction of the chain, these materials may still be brittle in perpendicular directions. Macroscopic structure can be adjusted to compensate for this anisotropy. For example, the high strength of Kevlar arises from a stacked multilayer macrostructure where aromatic polymer layers are rotated with respect to their neighbors. When loaded oblique to the chain direction, ductile polymers with flexible linkages, such as oriented polyethylene, are highly prone to shear band formation, so macroscopic structures which place the load parallel to the draw direction would increase strength.

Mixing polymers is another method of increasing strength, particularly with materials that show crazing preceding brittle fracture such as atactic polystyrene (APS). For example, by forming a 50/50 mixture of APS with polyphenylene oxide (PPO), this embrittling tendency can be almost completely suppressed, substantially increasing the fracture strength .

Glass

Many silicate glasses are strong in compression but weak in tension. By introducing compression stress into the structure, the tensile strength of the material can be increased. This is typically done via two mechanisms: thermal treatment (tempering) or chemical bath (via ion exchange).

In tempered glasses, air jets are used to rapidly cool the top and bottom surfaces of a softened (hot) slab of glass. Since the surface cools quicker, there is more free volume at the surface than in the bulk melt. The core of the slap then pulls the surface inward, resulting in an internal compressive stress at the surface. This substantially increases the tensile strength of the material as tensile stresses exterted on the glass must now resolve the compressive stresses before yielding.

sigma_{y=modified} = sigma_{y,0} + sigma_{compressive}

Alternately, in chemical treatment, a glass slab treated containing network formers and modifiers is submerged into a molten salt bath containing ions larger than those present in the modifier. Due to a concentration gradient of the ions, mass transport must take place. As the larger cation diffuses from the molten salt into the surface, it replaces the smaller ion from the modifier. The larger ion squeezing into surface introduces compressive stress in the glass's surface. A common example is treatment of sodium oxide modified silicate glass in molten potassium chloride.

Applications & Current Research

Strengthening of materials is useful in many applications. One main application of strengthened materials is for construction. In order to have stronger buildings and bridges, one must have a strong frame that can support high tensile or compressive load and resist plastic deformation. The steel frame used to make the building should be as strong as possible so that it does not bend under the entire weight of the building. Polymeric roofing materials would also need to be strong so that the roof does not cave in when there is build-up of snow on the rooftop.

Research is also currently being done to increase the strength of metallic materials through the addition of polymer materials such as bonded carbon fiber reinforced polymer to (CFRP) [http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6V2G-4GX6HXM-8&_user=501045&_coverDate=03%2F31%2F2006&_rdoc=1&_fmt=&_orig=search&_sort=d&view=c&_acct=C000022659&_version=1&_urlVersion=0&_userid=501045&md5=f938f165c8666c9fa0174d293e45297b#bib4] .

Molecular Dynamics Simulations

The use of computation simulations to model work hardening in materials allows for the direct observation of critical elements that rule the process of strengthening materials. The basic reasoning derives from the fact that, when examining plasticity and the movement of dislocations in materials, a focus on the atomistic level is many times not accounted for and the focus rests on the contiuum description of materials. Since the practice of tracking these atomistic effects in experiments and theorizing about them in textbooks cannot provide a full understanding of these interactions, many turn to molecular dynamics simulations to develop this understanding. Buehler, Markus J. "the dynamical complexity of work - hardening: a large-scale molecular dynamics simulation." Acta Mech Sinica. pg 103-111. 2005]

The simulations work by utilizing the known atomic interactions between any two atoms and the relationship F = ma, so that the dislocations moving through the material are ruled by simple mechanical actions and reactions of the atoms. The interatomic potential usually utilized to estimate these interactions is the Lennard – Jones 12:6 potential. Lennard – Jones is widely accepted because its experimental shortcomings are well-known. Abraham, F. "Simulating materials failure by using up to one billion atoms and the world's fastest computer: Work-hardening." Proc Natl Acad Sci. pg 5783–5787. 2002] These interactions are simply scaled up to millions or billions of atoms in some cases to simulate materials more accurately.

Molecular dynamic simulations display the interactions based upon the governing equations provided above for the strengthening mechanisms. They provide an effective way to see these mechanisms in action outside the painstaking realm of direct observation during experiments.....

References

8-Mechanical Metallurgy , Third Edition , George E. Dieter University of Maryland

ee also

*Tempering
*Strength of materials
*Work hardening
*Solid solution strengthening
*Precipitation strengthening
*Grain boundary strengthening


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Grain boundary strengthening — (or Hall Petch strengthening) is a method of strengthening materials by changing their average crystallite (grain) size. It is based on the observation that grain boundaries impede dislocation movement and that the number of dislocations within a …   Wikipedia

  • Strength of materials — Internal force lines are denser near the hole, a common stress concentration In materials science, the strength of a material is its ability to withstand an applied stress without failure. The applied stress may be tensile, compressive, or shear …   Wikipedia

  • Solid solution strengthening — is a type of alloying that can be used to improve the strength of a pure metal. The technique works by adding atoms of one element (the alloying element) to the crystalline lattice another element (the base metal). The alloying element diffuses… …   Wikipedia

  • Precipitation hardening — Precipitation hardening, also called age hardening, is a heat treatment technique used to increase the yield strength of malleable materials, including most structural alloys of aluminium, magnesium, nickel and titanium, and some stainless steels …   Wikipedia

  • Work hardening — Work hardening, also known as strain hardening or cold working, is the strengthening of a metal by plastic deformation. This strengthening occurs because of dislocation movements within the crystal structure of the material.[1] Any material with… …   Wikipedia

  • Stress field — A stress field is a region in a body for which the stress is defined at every point. Stress fields are widely used in fluid dynamics and materials science.Intuitively, one can picture the stress fields as the stress created by adding an extra… …   Wikipedia

  • Hardness — This article is about mechanical properties of materials. For other uses, see Hard. Hardness is the measure of how resistant solid matter is to various kinds of permanent shape change when a force is applied. Macroscopic hardness is generally… …   Wikipedia

  • Ceramic engineering — Simulation of the outside of the Space Shuttle as it heats up to over 1,500 °C (2,730 °F) during re entry into the Earth s atmosphere Ceramic engineering is the science and technology of creating objects from inorganic, non metallic… …   Wikipedia

  • telecommunications media — Introduction       equipment and systems metal wire, terrestrial and satellite radio, and optical fibre employed in the transmission of electromagnetic signals. Transmission media and the problem of signal degradation       Every… …   Universalium

  • Steeluniversity.org — Infobox Website name = steeluniversity.org url = http://www.steeluniversity.org commercial = Non profit type = E learning language = English, Spanish, Chinese (traditional simplified), Korean, Russian, German registration = Optional owner =… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”