API gravity

The American Petroleum Institute gravity, or API gravity, is a measure of how heavy or light a petroleum liquid is compared to water. If its API gravity is greater than 10, it is lighter and floats on water; if less than 10, it is heavier and sinks. API gravity is thus an inverse measure of the relative density of a petroleum liquid and the density of water, but it is used to compare the relative densities of petroleum liquids. For example, if one petroleum liquid floats on another and is therefore less dense, it has a greater API gravity. Although mathematically, API gravity has no units (see the formula below), it is nevertheless referred to as being in "degrees". API gravity is gradated in degrees on a hydrometer instrument. The API scale was designed so that most values would fall between 10 and 70 API gravity degrees.

Contents

History of development

The U.S. National Bureau of Standards in 1916 established the Baumé scale (see: Degree Baumé) as the standard for measuring specific gravity of liquids less dense than water (see: Density of water). Investigation by the U.S. National Academy of Sciences found major errors in salinity and temperature controls that had caused serious variations in published values. Hydrometers in the U.S. had been manufactured and distributed widely with a modulus of 141.5 instead of the Baumé scale modulus of 140. The scale was so firmly established that by 1921 the remedy implemented by the American Petroleum Institute was to create the API Gravity scale, recognizing the scale that was actually being used.

API gravity formulas

The formula to obtain API gravity of petroleum liquids, from specific gravity (SG), is:

\text{API gravity} = \frac{141.5}{\text{SG}} - 131.5

Conversely, the specific gravity of petroleum liquids can be derived from the API gravity value as

\text{SG at}~60^\circ\text{F} = \frac{141.5}{\text{API gravity} + 131.5}

Thus, a heavy oil with a specific gravity of 1.0 (i.e., with the same density as pure water at 60°F) would have an API gravity of:

\frac{141.5}{1.0} - 131.5 = 10.0^\circ\text{API}

Using API gravity to calculate barrels of crude oil per metric ton

In the oil industry, quantities of crude oil are often measured in metric tons. One can calculate the approximate number of barrels per metric ton for a given crude oil based on its API gravity:

\text{barrels of crude oil per metric ton} = 1\div\bigg[\frac{141.5}{\text{API gravity}+131.5} \times 0.159\bigg]

So, for example, a metric ton of West Texas Intermediate (39.6° API) would contain about 7.6 barrels.

Measurement of API gravity from its density

To derive the API gravity from the density, the density is first measured using either the hydrometer, detailed in ASTM D1298 or with the oscillating U-tube method detailed in ASTM D4052. Density adjustments at different temperatures, corrections for soda-lime glass expansion and contraction and meniscus corrections for opaque oils are detailed in the Petroleum Measurement Tables, details of usage specified in ASTM D1250. The specific gravity is then calculated from the formula below and the API gravity calculated from the first formula above.

\mbox{SG oil} = \frac{\rho_\text{oil}}{\rho_{\text{H}_2\text{O}}}

Direct Measurement of API gravity (Hydrometer method)

Thves the advantages of field testing and on-board conversion of measured volumes to volume correction. This method is detailed in ASTM D287.

Classifications or grades

Generally speaking, oil with an API gravity between 40 and 45 commands the highest prices. Above 45 degrees the molecular chains become shorter and less valuable to refineries.[1]

Crude oil is classified as light, medium or heavy, according to its measured API gravity.

  • Light crude oil is defined as having an API gravity higher than 31.1 °API. (less than 870 kg/m3)
  • Medium oil is defined as having an API gravity between 22.3 °API and 31.1 °API. (870 to 920 kg/m3)
  • Heavy oil is defined as having an API gravity below 22.3 °API. (920 to 1000 kg/m3)
  • Extra heavy oil is defined with API gravity below 10.0 °API. (greater than 1000 kg/m3)

Not all parties use the same grading.[2] The United States Geological Survey uses slightly different definitions.[3]

Crude oil with API gravity less than 10 °API is referred to as extra heavy oil or bitumen. Bitumen derived from the oil sands deposits in the Alberta, Canada area has an API gravity of around 8 °API. It is 'upgraded' to an API gravity of 31 °API to 33 °API,[citation needed] and the upgraded oil is known as synthetic crude.

See also

References

  1. ^ Louisiana Department of Natural Resources[dead link]
  2. ^ Crude oil grades, Crudemonitor.ca, web PDF file: CMonitor-Gr-PDF
  3. ^ USGS FS2006-3133_508, web PDF file: USGS-508-PDF

External links


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • API gravity — An arbitrary scale expressing the gravity, or density, of liquid petroleum products in terms of API degrees. Relationship of the API scale to specific gravity is expressed by the equation ºAPI = (441.5/sp gr 60/60F) 131.5. ASTM D 287 is the… …   Petroleum refining glossary

  • API Gravity —    Universally accepted scale, adopted by the API, to express the specific gravity of oils. It serves as a rough measure of quality. The higher the API gravity number, the richer the yield in premium refined products.    ► See also API …   Financial and business terms

  • API gravity —   American Petroleum Institute measure of specific gravity of crude oil or condensate in degrees. An arbitrary scale expressing the gravity or density of liquid petroleum products. The measuring scale is calibrated in terms of degrees API; it is… …   Energy terms

  • API gravity —    see degree API …   Dictionary of units of measurement

  • API gravity — noun A specific gravity scale measuring the relative density of various petroleum liquids, expressed in degrees …   Wiktionary

  • API gravity — плотность (нефтепродуктов) в градусах Американского нефтяного института …   Pipeline dictionary

  • API (disambiguation) — API, originally Advanced Programming Interface but now more commonly known by its near synonym, Application programming interface, is any defined inter program interface.API or api may also refer to:* Api (mountain), a mountain in Nepal * API… …   Wikipedia

  • Gravity (chemistry) — In chemistry, gravity is the density of a fluid, particularly a fuel. It is expressed in degrees, with lower numbers indicating heavier liquids and higher numbers indicating lighter liquids. See specific gravity and API gravity …   Wikipedia

  • API oil-water separator — An API oil water separator is a device designed to separate gross amounts of oil and suspended solids from the wastewater effluents of oil refineries, petrochemical plants, chemical plants, natural gas processing plants and other industrial… …   Wikipedia

  • Плотность в градусах API — Плотность в градусах API  единица измерения плотности нефти, разработанная Американским институтом нефти. Измерения в градусах API позволяют определить относительную плотность нефти по отношению к плотности воды при той же температуре. По… …   Википедия

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”