Teletraffic engineering

Teletraffic engineering

Teletraffic engineering is the application of traffic engineering theory to telecommunications. Teletraffic engineers use their basic knowledge of statistics including Queueing theory, the nature of traffic, their practical models, their measurements and simulations to make predictions and to plan telecommunication networks at minimum total cost. These tools and basic knowledge help provide reliable service at lower cost. Because the approach is so different to different networks, the networks are handled separately here: the PSTN, broadband networks, mobile networks, and networks where the possibility of traffic being heavy is more frequent than anticipated.

Introduction

Traffic engineering uses statistical techniques such as queuing theory to predict and engineer the behaviour of telecommunications networks such as telephone networks or the Internet.

The field was created by the work of A. K. Erlang in whose honour the unit of telecommunications traffic intensity, the Erlang, is named. The derived unit of traffic volume also incorporates his name. His Erlang distributions are still in common use in telephone traffic engineering.

The crucial observation in traffic engineering is that in large systems the law of large numbers can be used to make the aggregate properties of a system over a long period of time much more predictable than the behaviour of individual parts of the system.

The queueing theory originally developed for circuit-switched networks is applicable to packet-switched networks.

The most notable difference between these sub-fields is that packet-switched data traffic is self-similar. This is a consequence of the calls being between computers, and not people.

Teletraffic in PSTN architectures

Teletraffic theory was first developed by Agner Erlang for circuit-switched architectures such as the PSTN. As such, the basics of teletraffic theory is best introduced by examining teletraffic concepts as they relate to PSTNs.

The measurement of traffic in PSTNs allows network operators to determine and maintain the Quality of Service (QoS) and in particular the Grade of service (GoS) that they offer their subscribers. The QoS of a network must be maintained or else operators will lose subscribers. The performance of a network depends on whether all origin-destination pairs are receiving a satisfactory service.

Networks are handled as:

*loss systems where calls that cannot be handled are given equipment busy tone or
*queuing systems where calls that cannot be handled immediately are queued.

Congestion is defined as the situation when exchanges or circuit groups are inundated with calls and are unable to serve all the subscribers. Special attention must be given to ensure that such high loss situations do not arise. To help determine the probability of congestion occurring, operators should use the Erlang Equations or the Engset calculation.

Exchanges in the PSTN make use of Trunking concepts to help minimize the cost of the equipment to the operator. Modern switches generally have full availability and do not make use of Grading concepts.

Overflow systems make use of alternative routing circuit groups or paths to transfer excess traffic and thereby reduce the possibility of congestion.

Queueing systems used in telephone networks have been studied as a science. See queuing theory. For example subscribers are queued until they can be served. If subscribers are made to wait too long, they may lose patience and default from the queue, resulting in no service being provided.

A very important component in PSTNs is the SS7 Network used to route signalling traffic. As a supporting network, it carries all the signaling messages necessary to set up, break down or provide extra services. The signaling enables the PSTN control the manner in which traffic is routed from one location to another.

Transmission and switching of calls is performed using the principle of Time-Division Multiplexing (TDM). TDM allows multiple calls to be transmitted along the same physical path, reducing the cost of infrastructure.

A good example of the use of teletraffic theory in practice is in the design and management of a call center. Call centers use teletraffic theory to increase the efficiency of their services and overall profitability through calculating how many operators are really needed at each time of the day.

Teletraffic engineering in broadband networks

:"Main article: Teletraffic engineering in broadband networks"

Teletraffic Engineering is a well-understood discipline in the traditional voice network, where traffic patterns are established, growth rates can be predicted, and vast amounts of detailed historical data are available for analysis. However, in modern Broadband Networks, the teletraffic engineering methodologies used for voice networks are inappropriate. Various aspects relating to teletraffic engineering in broadband networks are discussed in this article.

Mobile traffic

For mobile networks, this article looks at service areas, service provision and service quality:
*Cellular traffic
*Mobile QoS

Long-tail traffic

Of great importance is the possibility that extremely infrequent occurrences are more likely than anticipated. The reason is that the network might have to withstand the unanticipated traffic.
*Long-tail traffic

Teletraffic economics and forecasting

As mentioned in the introduction, the purpose of teletraffic theory is to reduce cost in telecommunications networks. An important tool in achieving this goal is forecasting. Forecasting allows network operators to calculate the potential cost of a new network / service for a given GoS during the planning and design stage, thereby ensuring that costs are kept to a minimum.

An important method used in forecasting is simulation", which is described as the most common quantitative modelling technique in use today. An important reason for this is that computing power has become far more accessible, making Simulation the preferred analytical method for problems that are not easily solved mathematically.

As in any business environment, network operators must charge tariffs for their services. These charges must be balanced with the supplied QoS. When operators supply services internationally, this is described as trade in services and is governed by the General Agreement on Trade in Services (GATS).

References

* "Deploying IP and MPLS QoS for Multiservice Networks: Theory and Practice" by John Evans, Clarence Filsfils (Morgan Kaufmann, 2007, ISBN 0-12-370549-5)

See also

* ATM
* Busy hour call attempts
* Erlang unit
* Clos network
* TCP/IP
* MPLS
* Predictive dialer
* Routing
* RSVP - Traffic Engineering
* Traffic mix

External links

* V. B. Iversen, Teletraffic Engineering handbook, ( [http://www.itu.int/ITU-D/study_groups/SGP_1998-2002/SG2/StudyQuestions/Question_16/RapporteursGroupDocs/teletraffic.pdf PDF] )

* M. Zukerman, Introduction to Queueing Theory and Stochastic Teletraffic Models, ( [http://www.ee.unimelb.edu.au/staff/mzu/classnotes.pdf PDF] )


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Teletraffic engineering in broadband networks — Teletraffic engineering is a well understood discipline in the traditional voice network, where traffic patterns are established, growth rates can be predicted, and vast amounts of detailed historical data are available for analysis. However, for …   Wikipedia

  • Topic outline of engineering — For a more comprehensive list, see the List of engineering topics. Engineering is the practice and method of applying scientific and empirical knowledge to the service of humanity, and is distinct from the physical sciences, which are studies of… …   Wikipedia

  • Outline of engineering — See also: Index of engineering articles The following outline is provided as an overview of and topical guide to engineering: Engineering – discipline, art, skill and profession of acquiring and applying scientific, mathematical, economic, social …   Wikipedia

  • Traffic Engineering — beschreibt im Deutschen den Prozess, der die Erhebung (Analyse), Gestaltung und Optimierung von Datenflüssen und wegen in Rechnernetzwerken zum Inhalt hat. Am Anfang des Prozesses steht eine Erhebung der Anforderungen, sei es aus einem bereits… …   Deutsch Wikipedia

  • Traffic engineering — can mean: * traffic engineering (transportation), a branch of civil engineering * teletraffic engineering, a field of statistical techniques used in telecommunications …   Wikipedia

  • Cellular traffic — This article discusses the mobile cellular network aspect of teletraffic measurements. Mobile radio networks have traffic issues that do not arise in connection with the fixed line PSTN. Important aspects of cellular traffic include: quality of… …   Wikipedia

  • Long-tail traffic — This article covers a range of tools from different disciplines that may be used in the important science of determining the probability of rare events. The terms long range dependent , self similar and heavy tailed are very close in meaning.… …   Wikipedia

  • Traffic contract — If a service (or application) wishes to use a broadband network (an ATM network in particular) to transport a particular kind of traffic, it must first inform the network about what kind of traffic is to be transported, and the performance… …   Wikipedia

  • Engset calculation — The Engset calculation is a formula to determine the probability of congestion occurring within a telephony circuit group. It was named after its developer, T. O. Engset. The level of congestion can be used to determine a network s performance as …   Wikipedia

  • Christian Jacobæus — Anton Christian Jacobæus (1911 in Stockholm, Sweden–1988) was a Swedish electrical engineer, known for his contributions to teletraffic engineering, especially in the design of the modern crossbar switch used for telephone switching. Jacobæus… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”