Gauge conversion

Gauge conversion
Gauge EN.svg
Track gauge
by size
Broad gauge
Standard gauge
Narrow gauge
Minimum gauge
List of rail gauges

Break-of-gauge
Dual gauge
Gauge conversion
Track
Tramway track

In rail transportation, gauge conversion is the process of converting a railway from one rail gauge to another, through the alteration of the railway tracks. An alternative to gauge conversion is dual gauge track, or gauge conversion of the rail vehicles themselves.

Ideally railways should all be built to the same gauge, since a wide range of gauges from narrow to broad are of similar value in carrying heavy loads at low cost, while small differences of gauge create tremendous break-of-gauge costs and inconvenience.

Contents

Rail vehicles

Gauge conversion of coaches and wagons involves the replacement of the wheelsets or entire bogies, such as happened when the 7 ft 0 14 in (2,140 mm) gauge of the Great Western Railway was abandoned in May 1892. Where vehicles regularly work to and fro across a permanent change of gauge, for example between the 4 ft 8 12 in (1,435 mm) system in France and the 1,668 mm (5 ft 5 23 in) in Spain, stations are equipped with special bogie exchange equipment. Some vehicles nowadays are fitted with variable gauge axles which do not require any exchange of the wheelsets, but still require special equipment. This temporary alteration to allow through working is generally referred to as "gauge change".

Steam locomotives are difficult to convert unless this is already allowed for in the design, such as in some East African Railways Garratts, and in steam locomotives built for Victoria after 1930s. In the event, few have been so converted, but one such is Victorian Railways R class R766.

Sleeper types

Often gauge convertible sleepers are installed before the conversion of the rails themselves. Sleepers have to be long enough to take the wider of the gauges, and secondly, the sleepers must be able to take the fittings of both gauges. Gauge convertibility can also be a stepping stone to dual gauge. In cases where the differences between the gauges are small, such as 1,000 mm (3 ft 3 38 in)/1,067 mm (3 ft 6 in) and 1,435 mm (4 ft 8 12 in)/1,524 mm (5 ft) , dual gauge with a third rail is not practicable, in these cases four rail dual gauge is necessary.

  • Timber sleepers, provided that they are long enough, are always gauge convertible, since additional holes for the dogspikes can always be drilled later. If the new gauge is wider than the old, a shorter than normal sleeper can be tolerated to a degree.
  • Concrete sleepers cannot be converted as an afterthought, but must have the future fittings cast in place when manufactured.
  • Steel sleepers should have the extra fitting incorporated when manufactured, though it might be possible to drill or weld the fitted sleeper after installation with some difficulty.

Loading gauge

Narrow gauge railways often have a significantly smaller loading gauge in both height and width. Conversion to a wider track gauge will often require enlargement of the loading gauge, by raising bridges and enlarging tunnels, if any.

The minimum radius curve of a narrow gauge railway is often less than a wider gauge, which may require deviations to ease such curves.

Track centres at stations with multiple tracks will also have to be widened. This would be less of a problem on the usually single track main lines of the narrow gauge railway.

Gauge orphan

During gauge conversion work such as between Seymour and Albury, branch lines such as Benalla to Oaklands and stations such as Violet Town become gauge orphans as they cannot easily be served by trains until extra costly work is done.

In this instance, the loading gauge of the broad gauge and standard gauge lines are essentially the same.

Track gauge conversion

Conversion rate

See also

  • Unigauge
  • Variable gauge

References


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Dual gauge — Track gauge by size Broad gauge Sta …   Wikipedia

  • Narrow gauge railway — Track gauge by size Broad gauge St …   Wikipedia

  • Gauge (knitting) — In knitting, the word Gauge , technical abbreviation GG, refers to Knitting Machines fineness size (not to the proportion, thickness or fineness of the finished knitted artifact, its stitch wideness or row length/depth). Indeed Gauge is the unit… …   Wikipedia

  • Minimum gauge railway — Track gauge by size Broad gauge Sta …   Wikipedia

  • Metre gauge — refers to narrow gauge railways and tramways with a track gauge of 1,000 mm (3 ft 3 3⁄8 in). In some African, American and Asian countries it is the main gauge. In Europe it has been used for local railways in France …   Wikipedia

  • Gauge (bore diameter) — The Gauge or bore of a shotgun or rifle is a unit of measurement used to express the diameter of the barrel. The gauge or bore of a barrel is equal to the number of solid spheres of lead each having the same diameter as the inside of the barrel… …   Wikipedia

  • List of gauge conversions — Railway gauge conversions include:During WWI and WWII, gauge conversion occurred backwards and forwards between Germany and Russia as the fronts and national borders chopped and changed. Timeline * Bostan Zhob railgauge|762 to railgauge|1676.… …   Wikipedia

  • Broad gauge — For other uses, see Gauge (disambiguation). Track gauge by size …   Wikipedia

  • Western standard gauge line — VictorianRailwayLineInfobox type = vic name = Western standard gauge yearcommenced = 1889 yearopened = yearcompleted = 1995 (in current form) yearclosed = fate = lengthkm = stations = tracks = Single track, crossing loops users = Freight and The… …   Wikipedia

  • Break-of-gauge — With railways, a break of gauge is where a line of one gauge meets a line of a different gauge. Trains and rolling stock cannot run through without some form of conversion between gauges, and freight and passengers must otherwise be transloaded.… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”