Roman siege engines

Roman siege engines

Roman siege engines were, for the most part, adapted from Hellenistic siege technology. Relatively small efforts were made to develop the technology; however, the Romans brought an unrelentingly aggressive style to siege warfare [Goldsworthy 2000: 144] . Caesar looked at war as a means of conquering and establishing Roman rule over new territories, bringing wealth to those serving in the field as well as citizens of the empire. He also knew that success in the field would increase the loyalty of his soldiers, allowing for more territory to be conquered through continued service. To this end, he took great interest in the integration of siege engines, organizing their use for optimal battlefield efficiency [Keppie 1984: 99] .

Army engineering corps

To facilitate this organization and the army’s self-sufficiency, an engineering corps was developed. An officer of engineers, or "praefectus fabrum", is referenced in armies of the Late Republic, but this post is not verifiable in all accounts and may have simply been a military advisor on the personal staff of a commanding officer [Keppie 1984: 99] . There were legion architects (whose rank is yet unknown) who were responsible for the construction of war machines who would also assure that all artillery constructions in the field were level. Ensuring that constructions were level was the job of the "libratores", who would also launch missiles and other projectiles (on occasion) during battle (Le Bohec 1994: 52). The engineering corps was in charge of massive production, frequently prefabricating artillery and siege equipment to facilitate its transportation [Goldsworthy 2000: 144] .

Artillery

During a siege the Romans would attack the weakest area of their enemy’s defenses and attempt to breach the wall(s) there. To support this effort, artillery fire would commence, with three main objectives [Le Bohec 1994: 138] : to cause damage to defenses, casualties among the opposing army, and loss of morale. It would also provide cover fire for troops building siege ramps or in siege towers. There were machines called " tormenta ", which would launch (sometimes incendiary) projectiles such as javelins, arrows, rocks, or beams. These devices were on wheeled platforms to follow the line’s advance. All were “predicated on a principle of physics: a lever was inserted into a skein of twisted horsehair to increase torsion, and when the arm was released, a considerable amount of energy was thus freed” [Le Bohec 1994: 138] . It was later stated that sinew, instead of twisted hair, provided a better “spring.” These weapons could be high-maintenance devices and were vulnerable to having their leather, sinew, or hemp skeins get wet or even damp, which would cause them to slacken and lose tension, rendering the engine useless [http://www.legionxxiv.org/catapulta/ Catapulta at LegionXXIV] ] .

It is somewhat difficult to clearly define and describe Roman artillery , as names are easily confused and historians still do not agree on all definitions. Perhaps best known are the "ballista", the "onager", and the "scorpio".

Ballistae


[
thumb|right|A_ballista.]

After the absorption of the Ancient Greek City states into the Roman Republic in 146 BC, some advanced Greek technology began to spread across many areas of Roman influence. This included the hugely advantageous military advances the Greeks had made (most notably by Dionysus of Syracuse), as well as all the scientific, mathematical, political and artistic developments.

The Romans 'inherited' the torsion powered Ballistae which had by now spread to several cities around the Mediterranean, all of which became Roman spoils of war in time, including one from Pergamum, which was depicted among a pile of 'trophy' weapons in relief on a balustrade.

The torsion ballista, developed by Alexander, was a far more complicated weapon than its predecessor, and the Romans developed it even further.

Vitruvius, in his "De Architectura "Book X, describes the construction and tuning of Ballistae.

Every century (group of 60-100 men) in the Roman army had a "ballista" by the 1st century AD [Le Bohec 1994: p. 138] . It was the command of the chief of the "ballista", under whom were the artillery experts, or "doctores ballistarum" and finally, the artillerymen, or "ballistarii" [Le Bohec 1994: p. 49] . "Ballistae" were heavy missile weapons, hurling large rocks great distances to damage rampart walls. They resembled large crossbows, rather than catapults. They were powered by two horizontal like arms, which were inserted into two vertical and tightly wound "skein" springs contained in a rectangular frame structure making up the head or principal part of the weapon. The arms were drawn rearward with a winch lever to further twist the skeins and thus gain the torsion power to cast a projectile. It has been said that the whirring sound of a ballista-fired stone struck fear and dread into the hearts of those inside the walls of besieged cities. The stones chosen to be used in the "ballista" had to be a particular sort. According to Vegetius river stones were best, since they are round, smooth, and dense. Ballista stones found at the site of Masada were chiseled to make them as round as possible [Garrison 1997.] .

Early Roman ballista

The early Roman "ballistae "were made of wood, and held together with iron plates around the frames and iron nails in the stand. The main stand had a slider on the top, into which were loaded the bolts or stone 'shot'. Attached to this, at the back, was a pair of winches and a claw, used to ratchet the bowstring back to the armed firing position. slider passed through the field frames of the weapon, in which were located the torsion springs (rope made of animal sinew), which were twisted around the bow arms, which in turn were attached to the bowstring.

Drawing the bowstring back with the winches twisted the already taut springs, storing the energy to fire the projectiles. The ballista was a highly accurate weapon (there are many accounts right from its early history of single soldiers being picked off by the operators), but some design aspects meant it could compromise its accuracy for range. The lightweight bolts could not gain the high momentum of the stones over the same distance as those thrown by the later onagers, trebuchets, or mangonels; these could be as heavy as 90-135 kg (200-300 pounds).

The Romans continued the development of the Ballista, and it became a highly-prized and valued weapon in the army of the Roman Empire.

It was used, just before the start of the Empire, by Julius Caesar during his conquest of Gaul and on both of his campaigns in conquering Britain. Both attempted invasions of Britain and the siege of Alesi are recorded in his own "Commentarii" (journal), "The Gallic Wars "("De Bello Gallico"). It was also used in the Roman siege of Masada.

First invasion of Britain

The first invasion of Britain took place in 55 BC, after a rapid and successful initial conquest of Gaul, in part as an exploratory expedition to see the land across the sea, and more practically to try and put an end to the re-enforcements sent across by the native Britons to fight the Romans in Gaul.

A total of eighty transports, carrying two legions attempted to land on the British shore (the eighteen accompanying cavalry transports had been blown off course on the way over), only to be driven back by the many British warriors assembled along the shoreline. The ships had to unload their troops on the beach, as it was the only one suitable for many kilometers, yet the massed ranks of British charioteers and javeliners were making it impossible.

Seeing this, Caesar ordered the warships – which were swifter and easier to handle than the transports, and likely to impress the natives more by their unfamiliar appearance – to be removed a short distance from the others, and then be rowed hard and run ashore on the enemy’s right flank, from which position the slings, bows and artillery could be used by men on deck to drive them back. This manoeuvre was highly successful.
Scared by the strange shape of the warships, the motion of the oars, and the unfamiliar machines, the natives halted and then retreated a little. (Caesar, "The Conquest of Gaul", p. 99)

iege of Alesia

In Gaul, the stronghold of Alesia was under a Roman siege in 52 BC, and was famously almost completely surrounded by a fourteen mile long trench filled with water diverted from the local river, then another trench, then a wooden palisade and towers, then the besiegeing Roman army, then another series of palisades and trenches to protect them from any Gallic relief forces. As was standard siege technique at the time, ballistae were placed up in the towers with snipers (armed with either bows or slings).

The Onager

The onager was a post-classical Roman siege engine, which derived its name from the kicking action of the machine, similar to that of an onager (wild ass). It is a type of catapult that uses torsional pressure, generally from twisted rope, to store energy for the shot.

The onager consisted of a frame placed on the ground to whose front end a vertical frame of solid timber was rigidly fixed; through the vertical frame ran an axle, which had a single stout spoke. On the extremity of the spoke was a sling used to launch a projectile.

In action the spoke was forced down, against the tension of twisted ropes or other springs, by a windlass, and then suddenly released. The spoke thus kicked the crosspiece of the vertical frame, and the projectile at its extreme end was shot forward.

The onagers of the Roman Empire were mainly used for sieging forts or settlements. They would often be armed with huge stones or rocks that could be covered with a flammable substance and set alight.

In the Middle Ages (recorded from around 1200) a less powerful version of the onager was used that held the projectile in a fixed bowl instead of a sling. This was so that many small projectiles could be thrown, as opposed to one large one. This engine was sometimes called the "mangonel", although the same name may have been used for a variety of siege engines.

Scorpios

The "scorpio" was a crossbow-like device that fired smaller arrows with deadly accuracy [Keppie 1984: 99] used both in the field and in sieges. They were so-named for their deadly, armor-piercing sting and could be operated by just one or two men. Scorpions were meant to kill and injure enemy forces, rather than break down enemy fortifications. Due to their smaller size, they would be mounted on or in siege towers. During the Siege of Amida, a scorpion-fired arrow killed the son of Grumbate, king of the Chionitae, when he was approaching the city to surrender [Goldsworthy 2000: 191] .

There has been some research done into the existence of the self-loading, serial-fire "scorpio" or polybolos. Legionaries either side would continuously keep turning cranks which turned a chain, which operated the various mechanisms to load and fire the catapult. All that was needed was for another soldier to keep feeding in more arrows [ [http://www.roman-empire.net/army/leg-siege.html Siege weapons at roman-empire.net] ] .

"Please note that the above information has been called into question. According to some sources, the scorpion was a nickname for a particular mangonel catapult that is essentially identical to the onager. It was so named for the arm the stuck up vertically like the sting of a scorpion."

Breaching the walls

A gold walled or mural crown, called the ‘’corona muralis’’ was awarded to the first man who captured the wall of an enemy city. Livy reports that in 210 BC, at the capture of New Carthage, this honor was claimed by both a legionary centurion and a marine. In order to avoid a near mutiny from the ferocity of the resulting dispute between legionaries and marines both men were eventually awarded a crown [Gilliver 1999: 141] .

Battering rams

Roman battering rams, or "aries", were an effective weapon for breaking down an enemy’s walls as well as their morale. Under Roman law, any defenders who failed to surrender before the first ram touched their wall were denied any rights [Goldsworthy 2000: p. 145] . The moment they heard the ram hit the wall, those inside the city knew that the siege proper had begun and there was no turning back [Gilliver 1999: p. 140] .

Josephus describes the battering ram used at Jotapata thus [Le Bohec 1994: p. 139] :

It is an immense beam, similar to a ship’s mast, with one end covered with iron shaped into a ram’s head; hence its name. It is suspended from another beam like a balance arm by cables around its middle, and this in turn is supported at both ends by posts fixed in the ground. It is drawn back by a huge number of men who then push it forward in unison with all their might so that it hits the wall with its iron head. There is no tower strong enough nor any wall thick enough to withstand repeated blows of this kind, and many cannot resist the first shock.

Vitruvius in "De Architectura "Book X describes the construction and use of battering rams.

For protection, a battering ram was suspended in a mobile shelter called a tortoise, or "testudo". According to Vegetius, it was given this name because the ram would swing out of the shelter much like a tortoise’s head comes out of its shell. Such shelters would provide the men underneath protection against missiles and incendiary devices. They were constructed from a framework of strong timbers with planks and wicker hurdles on the sides. The entire shelter would then be covered with a fireproof material such as uncured hides [Gilliver 1999: pp. 134-135] . According to Apollodorus, the shelter should be fixed to the ground while the ram was being used to both prevent skidding and strain on the axles from the weight of the moving apparatus. This would also increase the strength of the impact on the walls [Gilliver 1999: p. 138] .

Siege towers

According to Josephus, the Roman siege towers at Jotapata were 50 feet high and iron-plated to protect them from fire; those at Masada were reported to be 75 feet high. It was possible to have many different devices on siege towers, such as artillery, draw bridges and rams. Those at the top of the tower were to keep defenders off the walls while those below them attempted to breach the wall using ramps [Gilliver 1999: pp. 136-137.] . Following a basic design, details of tower construction varied from siege to siege and there is no known-of treatise which specifies at which level siege equipment should be placed. Vegetius noted that, “besiegers sometimes built a tower with another turret inside it that could suddenly be raised by ropes and pulleys to over-top the wall” [Gilliver 1999: 138] .

Mines


Mines could be dug under city walls as a means of entering a city secretly and capturing it but were more frequently constructed to weaken city walls. Once dug, sappers would underpin the walls with wood and cause the walls to collapse by firing the supports with resin, sulfur and other incendiary materials [Gilliver 1999: 140] .

Notes

References

*
*cite book
last = Gilliver
first = C.M.
title = The Roman Art of War
publisher = Tempus
date = 1999
location = Charleston, SC

*cite book
last = Goldsworthy
first = Adrian
title = Roman Warfare
publisher = Cassell
date = 2000
location = London

*cite book
last = Keppie
first = Lawrence
title = The Making of the Roman Army from Empire to Republic
publisher = Barnes & Noble Books
date = 1984
location = Totowa, NJ

*cite book
last = Le Bohec
first = Yann
title = The Imperial Roman Army
publisher = B.T. Batsford Ltd.
date = 1994 | location = London

External links

* [http://www.frapanthers.com/teachers/white/siege_gallery.htm Roman and Greek Siege Weapons - Gallery with Blueprints]

ee also

*Roman engineering
*Vitruvius


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Roman technology — is the engineering practice which supported Roman civilization and made the expansion of Roman commerce and Roman military possible over nearly a thousand years. The Roman Empire had the most advanced set of technology of their time, some of… …   Wikipedia

  • Siege engine — Replica battering ram at Château des Baux, France. A siege engine is a device that is designed to break or circumvent city walls and other fortifications in siege warfare. Some have been operated close to the fortifications, while others have… …   Wikipedia

  • Roman military engineering — The military engineering of Ancient Rome s armed forces was of a scale and frequency far beyond that of any of its contemporaries. Indeed, military engineering was in many ways institutionally endemic in Roman military culture, as demonstrated by …   Wikipedia

  • Roman conquest of Hispania — This article is part of the series on: Military of ancient Rome (portal) 753 BC – AD 476 Structural history Roman army (unit types and ranks …   Wikipedia

  • Roman commerce — Roman trade was the engine that drove the Roman economy of the late Republic and the early Empire. Fashions and trends in historiography and in popular culture have tended to neglect the economic basis of the empire in favor of the lingua franca… …   Wikipedia

  • Roman military diploma — This article is part of the series on: Military of ancient Rome (portal) 753 BC – AD 476 Structural history Roman army (unit types and ranks …   Wikipedia

  • Siege of Rome (537–538) — Infobox Military Conflict conflict=Siege of Rome partof=the Gothic War caption= date=March 537 ndash; March 538 AD place=Rome, Italy casus= territory=Rome successfully defended result=Roman victory combatant1=Eastern Roman Empire… …   Wikipedia

  • Roman Republic — See also: Roman Republic (18th century) and Roman Republic (19th century) Roman Republic Official name (as on coins): Roma after ca. 100 BC: Senatus PopulusQue Romanus ( The Senate and People of Rome ) …   Wikipedia

  • Siege of Jerusalem (70) — For other sieges laid upon the city of Jerusalem in history, see Siege of Jerusalem. Siege of Jerusalem Part of the First Jewish Roman War …   Wikipedia

  • Roman Senate — Ancient Rome This article is part of the series: Politics and government of Ancient Rome Periods …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”