Field-programmable gate array

:"FPGAs should not be confused with the flip-chip pin grid array, a form of integrated circuit packaging."

A field-programmable gate array is a semiconductor device containing programmable logic components called "logic blocks", and programmable interconnects. Logic blocks can be programmed to perform the function of basic logic gates such as AND, and XOR, or more complex combinational functions such as decoders or mathematical functions. In most FPGAs, the logic blocks also include memory elements, which may be simple flip-flops or more complete blocks of memory.

A hierarchy of programmable interconnects allows logic blocks to be interconnected as needed by the system designer, somewhat like a one-chip programmable breadboard. Logic blocks and interconnects can be programmed by the customer or designer, after the FPGA is manufactured, to implement any logical function—hence the name "field-programmable".

FPGAs are usually slower than their application-specific integrated circuit (ASIC) counterparts, cannot handle as complex a design, and draw more power (for any given semiconductor process). But their advantages include a shorter time to market, ability to re-program in the field to fix bugs, and lower non-recurring engineering costs. Vendors can sell cheaper, less flexible versions of their FPGAs which cannot be modified after the design is committed. The designs are developed on regular FPGAs and then migrated into a fixed version that more resembles an ASIC.

"Complex Programmable Logic Device" (CPLDs) are an alternative for simpler designs. They also retain their programming over powerdowns .

To configure ("program") an FPGA or CPLD you specify how you want the chip to work with a logic circuit diagram or a source code using a hardware description language (HDL). The HDL form might be easier to work with when handling large structures because it's possible to just specify them numerically rather than having to draw every piece by hand. On the other hand, schematic entry can allow for easier visualisation of a design.

Going from schematic/HDL source files to actual configuration: The source files are fed to a software suite from the FPGA/CPLD vendor that through different steps will produce a file. This file is then transferred to the FPGA/CPLD via a serial interface (JTAG) or to an external memory device like an EEPROM.

History

The historical roots of FPGAs are in complex programmable logic devices (CPLDs) of the early to mid 1980s. A Xilinx co-founder, Ross Freeman, invented the field programmable gate array in 1984. CPLDs and FPGAs include a relatively large number of programmable logic elements. CPLD logic gate densities range from the equivalent of several thousand to tens of thousands of logic gates, while FPGAs typically range from tens of thousands to several million.

The primary differences between CPLDs and FPGAs are architectural. A CPLD has a somewhat restrictive structure consisting of one or more programmable sum-of-products logic arrays feeding a relatively small number of clocked registers. The result of this is less flexibility, with the advantage of more predictable timing delays and a higher logic-to-interconnect ratio. The FPGA architectures, on the other hand, are dominated by interconnect. This makes them far more flexible (in terms of the range of designs that are practical for implementation within them) but also far more complex to design for.

Another notable difference between CPLDs and FPGAs is the presence in most FPGAs of higher-level embedded functions (such as adders and multipliers) and embedded memories.

Some FPGAs have the capability of partial re-configuration that lets one portion of the device be re-programmed while other portions continue running.

Modern developments

A recent trend has been to take the coarse-grained architectural approach a step further by combining the logic blocks and interconnects of traditional FPGAs with embedded microprocessors and related peripherals to form a complete "system on a programmable chip". This work mirrors the architecture by Ron Perlof and Hana Potash of Burroughs Advanced Systems Group which combined a reconfigurable CPU architecture on a single chip called the SB24. That work was done in 1982. Examples of such hybrid technologies can be found in the Xilinx Virtex-II PRO and Virtex-4 devices, which include one or more PowerPC processors embedded within the FPGA's logic fabric. The Atmel FPSLIC is another such device, which uses an AVR processor in combination with Atmel's programmable logic architecture.

An alternate approach to using hard-macro processors is to make use of "soft" processor cores that are implemented within the FPGA logic.(See "Soft processors" below).

As previously mentioned, many modern FPGAs have the ability to be reprogrammed at "run time," and this is leading to the idea of reconfigurable computing or reconfigurable systems — CPUs that reconfigure themselves to suit the task at hand. The Mitrion Virtual Processor from Mitrionics is an example of a reconfigurable soft processor that is implemented on FPGAs. It does not however support dynamic reconfiguration at runtime, but instead adapts itself to a specific program.

Additionally, new, non-FPGA architectures are beginning to emerge. Software-configurable microprocessors such as the Stretch S5000 adopt a hybrid approach by providing an array of processor cores and FPGA-like programmable cores on the same chip.

Soft processors

There are many soft microprocessor cores available, both closed and open source. For a given CPU architecture, a hard (embedded) CPU core will outperform a soft-core CPU (i.e., a programmable-logic implementation of the CPU). The following list is by no means exhaustive.



Applications

Applications of FPGAs include digital signal processing, software-defined radio, aerospace and defense systems, ASIC prototyping, medical imaging, computer vision, speech recognition, cryptography, bioinformatics, computer hardware emulation and a growing range of other areas.FPGAs originally began as competitors to CPLDs and competed in a similar space, that of glue logic for PCBs. As their size, capabilities, and speed increased, they began to take over larger and larger functions to the state where some are now marketed as full systems on chips (SOC).

FPGAs especially find applications in any area or algorithm that can make use of the massive parallelism offered by their architecture. One such area is code breaking, in particular brute-force attack, of cryptographic algorithms.

FPGAs are increasingly used in conventional High Performance Computing applications where computational kernels such as FFT or Convolution are performed on the FPGA instead of a microprocessor. The use of FPGAs for computing tasks is known as reconfigurable computing.

The inherent parallelism of the logic resources on the FPGA allows for considerable compute throughput even at a sub-500 MHz clock rate. For example, the current (2007) generation of FPGAs can implement around 100 single precision floating point units, all of which can compute a result every single clock cycle. The flexibility of the FPGA allows for even higher performance by trading off precision and range in the number format for an increased number of parallel arithmetic units. This has driven a new type of processing called reconfigurable computing, where time intensive tasks are offloaded from software to FPGAs.

The adoption of FPGAs in high performance computing is currently limited by the complexity of FPGA design compared to conventional software and the extremely long turn-around times of current design tools, where 4-8 hours wait is necessary after even minor changes to the source code.

Architecture

The typical basic architecture consists of an array of configurable logic blocks (CLBs) and routing channels. Multiple I/O pads may fit into the height of one row or the width of one column in the array. Generally, all the routing channels have the same width (number of wires).

An application circuit must be mapped into an FPGA with adequate resources.

A classic FPGA logic block consists of a 4-input lookup table (LUT), and a flip-flop, as shown below. In recent years, manufacturers have started moving to 6-input LUTs in their high performance parts, claiming increased performance. [http://www.xilinx.com/bvdocs/whitepapers/wp245.pdf]

There is only one output, which can be either the registered or the unregistered LUT output. The logic block has four inputs for the LUT and a clock input. Since clock signals (and often other high-fanout signals) are normally routed via special-purpose dedicated routing networks in commercial FPGAs, they and other signals are separately managed.

For this example architecture, the locations of the FPGA logic block pins are shown below.

Each input is accessible from one side of the logic block, while the output pin can connect to routing wires in both the channel to the right and the channel below the logic block.

Each logic block output pin can connect to any of the wiring segments in the channels adjacent to it.

Similarly, an I/O pad can connect to any one of the wiring segments in the channel adjacent to it. For example, an I/O pad at the top of the chip can connect to any of the W wires (where W is the channel width) in the horizontal channel immediately below it.

Generally, the FPGA routing is unsegmented. That is, each wiring segment spans only one logic block before it terminates in a switch box. By turning on some of the programmable switches within a switch box, longer paths can be constructed. For higher speed interconnect, some FPGA architectures use longer routing lines that span multiple logic blocks.

Whenever a vertical and a horizontal channel intersect, there is a switch box. In this architecture, when a wire enters a switch box, there are three programmable switches that allow it to connect to three other wires in adjacent channel segments. The pattern, or topology, of switches used in this architecture is the planar or domain-based switch box topology. In this switch box topology, a wire in track number one connects only to wires in track number one in adjacent channel segments, wires in track number 2 connect only to other wires in track number 2 and so on. The figure below illustrates the connections in a switch box.

Modern FPGA families expand upon the above capabilities to include higher level functionality fixed into the silicon. Having these common functions embedded into the silicon reduces the area required and gives those functions increased speed compared to building them from primitives. Examples of these include multipliers, generic DSP blocks, embedded processors, high speed IO logic and embedded memories.

FPGAs are also widely used for systems validation including pre-silicon validation, post-silicon validation, and firmware development. This allows chip companies to validate their design before the chip is produced in the factory, reducing the time to market.

FPGA design and programming

To define the behavior of the FPGA, the user provides a hardware description language (HDL) or a schematic design. Then, using an electronic design automation tool, a technology-mapped netlist is generated. The netlist can then be fitted to the actual FPGA architecture using a process called place-and-route, usually performed by the FPGA company's proprietary place-and-route software. The user will validate the map, place and route results via timing analysis, simulation, and other verification methodologies. Once the design and validation process is complete, the binary file generated (also using the FPGA company's proprietary software) is used to (re)configure the FPGA.

The most common HDLs are VHDL and Verilog, although in an attempt to reduce the complexity of designing in HDLs, which have been compared to the equivalent of assembly languages, there are moves to raise the abstraction level through the introduction of alternative languages.

To simplify the design of complex systems in FPGAs, there exist libraries of predefined complex functions and circuits that have been tested and optimized to speed up the design process. These predefined circuits are commonly called "IP cores", and are available from FPGA vendors and third-party IP suppliers (rarely free, and typically released under proprietary licenses). Other predefined circuits are available from developer communities such as OpenCores (typically "free", and released under the GPL, BSD or similar license), and other sources.

In a typical design flow, an FPGA application developer will simulate the design at multiple stages throughout the design process. Initially the RTL description in VHDL or Verilog is simulated by creating test benches to simulate the system and observe results. Then, after the synthesis engine has mapped the design to a netlist, the netlist is translated to a gate level description where simulation is repeated to confirm the synthesis proceeded without errors. Finally the design is laid out in the FPGA at which point propagation delays can be added and the simulation run again with these values back-annotated onto the netlist.

Basic process technology types

*SRAM - based on static memory technology. In-system programmable and re-programmable. Requires external boot devices. CMOS.
*Antifuse - One-time programmable. CMOS.
*EPROM - Erasable Programmable Read-Only Memory technology. Usually one-time programmable in production because of plastic packaging. Windowed devices can be erased with ultraviolet (UV) light. CMOS.
*EEPROM - Electrically Erasable Programmable Read-Only Memory technology. Can be erased, even in plastic packages. Some, but not all, EEPROM devices can be in-system programmed. CMOS.
*Flash - Flash-erase EPROM technology. Can be erased, even in plastic packages. Some, but not all, flash devices can be in-system programmed. Usually, a flash cell is smaller than an equivalent EEPROM cell and is therefore less expensive to manufacture. CMOS.
*Fuse - One-time programmable. Bipolar.

Manufacturers and their specialties

As of late 2005, the FPGA market has mostly settled into a state where there are two major "general-purpose" FPGA manufacturers and a number of other players who differentiate themselves by offering unique capabilities.

* Xilinx and Altera are the current FPGA market leaders. Xilinx also provides free Windows and Linux design software [cite web|title=Xilinx ISE WebPACK|url=http://www.xilinx.com/ise/logic_design_prod/webpack.htm] , while Altera provides free Windows tools, the Solaris and Linux tools are only available via a rental scheme. [cite web|title=Quartus II Web edition software|url=https://www.altera.com/support/software/download/altera_design/quartus_we/dnl-quartus_we.jsp] .
* Lattice Semiconductor provides both SRAM and non-volatile, flash-based FPGAs.
* Actel has antifuse and reprogrammable flash-based FPGAs, and also offers mixed signal flash-based FPGAs.
* Atmel provides fine-grain reconfigurable devices, as the Xilinx XC62xx were. They focus on providing Atmel AVR Microcontrollers with FPGA fabric on the same die.
* QuickLogic has antifuse (programmable-only-once) products and heavily focused on handheld applications.
* Achronix Semiconductor has very fast FPGAs in development, focusing on speeds approaching 2 GHz.

See also

* Gate array
* Application-specific integrated circuit (ASIC)
* Application-specific instruction-set processor (ASIP)
* Complex programmable logic device (CPLD)
* Field-programmable analog array (FPAA)
* VHDL: VHSIC (Very High Speed Integrated Circuit) Hardware Description Language
* Verilog: Hardware Description Language
* JHDL: Just-Another Hardware Description Language
* Reconfigurable Computing
* Configware

Notes

External links

Resources

* [http://www.eecg.toronto.edu/~jayar/pubs/brown/survey.html Architecture of FPGAs and CPLDs]
* [http://www.vlsi-world.com/content/view/48/47/ Introduction to Dynamic Partial Reconfiguration]
* [http://www.fpgaCentral.com/ FPGA Central: Vendor, Forum, IP, Webcast]
* [http://www.fpga-faq.org/ FPGA FAQ Repository]
* [http://www.fpga-faq.org/FPGA_Boards.shtml List of FPGA Boards and Systems]
* [http://instruct1.cit.cornell.edu/courses/ece576/ Cornell ECE576 Altera FPGA design examples]
* [http://fpga4fun.com FPGA tutorials]
* [http://www.dsp-fpga.com/ DSP-FPGA.com Magazine]
* [http://www.openfpga.org OpenFPGA]
* [http://www.opencores.org OpenCores.org] - Open source IP Core hub
* [http://www.fccm.org Field-Programmable Custom Computing Machines]
* [http://www.fpgafromscratch.com FPGA Design From Scratch]

oftware Tools

* [http://http://www.agilityds.com/products/c_based_products/default.aspx Agility Design Solutions] - DK Design Suite for Handel C to FPGA synthesis
* [http://sourceforge.net/project/showfiles.php?group_id=143723&abmode=1 Sourceforge] - Free tools and cores for FPGAs
* [http://www.3L.com/ 3L Diamond] - Diamond interactive design environment (IDE) for multiprocessor systems (Diamond DSP: RTOS for a network of DSP devices; Diamond FPGA: combining the power of DSP and FPGA devices)
* [http://www.altium.com/fpga Altium Designer] - Design suite for Altera, Xilinx, Actel, Lattice FPGA/CPLD families
* [http://www.altera.com/ Quartus] - Design suite for Altera devices
* [http://www.xilinx.com/ ISE] - Design suite for Xilinx devices
* [http://www.latticesemi.com/ ispLEVER] - Design suite for Lattice devices
* [http://www.actel.com/products/software/libero/default.aspx Libero IDE Actel] - Design suite for Actel devices
* [http://www.zeemz.com/ LogicSim] - FPGA simulation tool
* [http://www.modelsim.com/ ModelSim] - Mixed-languages simulator
* [http://www.synplicity.com/ Synplify] - FPGA synthesis tool
* [http://www.ni.com/fpga LabVIEW FPGA] - Graphical Programming FPGAs on COTS Hardware

Media

* [http://video.google.com/videoplay?docid=-4969729965240981475 Prof. Bob Brodersen: General Purpose, Low Power Supercomputing Using Reconfiguration]

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Field programmable Gate Array —   [dt. »im (Praxis )Feld programmierbare Gatteranordnung«] (Field programmable Logic Array), FPGA …   Universal-Lexikon

  • Field Programmable Gate Array — Ein Field Programmable Gate Array (kurz: FPGA) ist ein Integrierter Schaltkreis (IC) der Digitaltechnik, in den eine logische Schaltung programmiert werden kann. Die englische Bezeichnung kann übersetzt werden als: im (Anwendungs )Feld… …   Deutsch Wikipedia

  • Field-Programmable Gate Array — Circuit logique programmable FPGA de Xilinx (modèle Spartan XC3S400) avec 400 000 portes et une fréquence de 50 MHz Un circuit logique programmable, ou réseau logique programmable, est un circuit intégré logique qui peut être… …   Wikipédia en Français

  • field-programmable gate array — noun an gate array designed to be configured by the customer or designer after manufacturing in the field, i.e. after manufacturing. Syn: FPGA …   Wiktionary

  • Field Programmable Logic Array — Grundprinzip eines PLA Eine programmierbare logische Anordnung, häufig in deutschsprachiger Fachliteratur als Programmable Logic Array oder kurz PLA bezeichnet, ist ein Halbleiterschaltkreis, der aus insgesamt zwei hintereinander geschalteten AND …   Deutsch Wikipedia

  • Field-programmable analog array — A field programmable analog array (FPAA) is an integrated device containing configurable analog blocks (CAB) and interconnects between these blocks. Unlike their digital cousin, the FPGA, the devices tend to be more application driven than… …   Wikipedia

  • Gate Array — Gate Arrays, auch als Uncommitted Logic Array (ULA) bezeichnet, sind vorkonfektionierte Logikschaltungen, die kundenspezifisch gefertigt werden. Beim Gate Array werden die meisten Herstellungsschritte kundenunabhängig durchgeführt. Die Lage der… …   Deutsch Wikipedia

  • Field Programmable Nanowire Interconnect — (often abbreviated FPNI) is a new computer architecture developed by Hewlett Packard. This is a defect tolerant architecture, using the results of the Teramac experiment.Details: The design combines a nanoscale crossbar switch structure with… …   Wikipedia

  • Programmable Logic Array — Grundprinzip eines PLA Eine programmierbare logische Anordnung, häufig in deutschsprachiger Fachliteratur als Programmable Logic Array oder kurz PLA bezeichnet, ist ein Halbleiterschaltkreis, der aus insgesamt zwei hintereinander geschalteten AND …   Deutsch Wikipedia

  • Gate array — A gate array or uncommitted logic array (ULA) is an approach to the design and manufacture of application specific integrated circuits (ASICs). A gate array circuit is a prefabricated silicon chip circuit with no particular function in which… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”