Curvature of a measure

Curvature of a measure

In mathematics, the curvature of a measure defined on the Euclidean plane R2 is a quantification of how much the measure's "distribution of mass" is "curved". It is related to notions of curvature in geometry. In the form presented below, the concept was introduced in 1995 by the mathematician Mark S. Melnikov; accordingly, it may be referred to as the Melnikov curvature or Menger-Melnikov curvature. Melnikov and Verdera (1995) established a powerful connection between the curvature of measures and the Cauchy kernel.

Contents

Definition

Let μ be a Borel measure on the Euclidean plane R2. Given three (distinct) points x, y and z in R2, let R(xyz) be the radius of the Euclidean circle that joins all three of them, or +∞ if they are collinear. The Menger curvature c(xyz) is defined to be

c(x, y, z) = \frac{1}{R(x, y, z)},

with the natural convention that c(xyz) = 0 if x, y and z are collinear. It is also conventional to extend this definition by setting c(xyz) = 0 if any of the points x, y and z coincide. The Menger-Melnikov curvature c2(μ) of μ is defined to be

c^{2} (\mu) = \iiint_{\mathbb{R}^{2}} c(x, y, z)^{2} \, \mathrm{d} \mu (x) \mathrm{d} \mu (y) \mathrm{d} \mu (z).

More generally, for α ≥ 0, define c2α(μ) by

c^{2 \alpha} (\mu) = \iiint_{\mathbb{R}^{2}} c(x, y, z)^{2 \alpha} \, \mathrm{d} \mu (x) \mathrm{d} \mu (y) \mathrm{d} \mu (z).

One may also refer to the curvature of μ at a given point x:

c^{2} (\mu; x) = \iint_{\mathbb{R}^{2}} c(x, y, z)^{2} \, \mathrm{d} \mu (y) \mathrm{d} \mu (z),

in which case

c^{2} (\mu) = \int_{\mathbb{R}^{2}} c^{2} (\mu; x) \, \mathrm{d} \mu (x).

Examples

  • The trivial measure has zero curvature.
  • A Dirac measure δa supported at any point a has zero curvature.
  • If μ is any measure whose support is contained within a Euclidean line L, then μ has zero curvature. For example, one-dimensional Lebesgue measure on any line (or line segment) has zero curvature.
  • The Lebesgue measure defined on all of R2 has infinite curvature.
  • If μ is the uniform one-dimensional Hausdorff measure on a circle Cr or radius r, then μ has curvature 1/r.

Relationship to the Cauchy kernel

In this section, R2 is thought of as the complex plane C. Melnikov and Verdera (1995) showed the precise relation of the boundedness of the Cauchy kernel to the curvature of measures. They proved that if there is some constant C0 such that

\mu(B_{r} (x)) \leq C_{0} r

for all x in C and all r > 0, then there is another constant C, depending only on C0, such that

\left| 6 \int_{\mathbb{C}} | \mathcal{C}_{\varepsilon} (\mu) (z) | \, \mathrm{d} \mu (z) - c_{\varepsilon}^{2} (\mu) \right| \leq C \| \mu \|

for all ε > 0. Here cε denotes a truncated version of the Menger-Melnikov curvature in which the integral is taken only over those points x, y and z such that

| xy | > ε;
| yz | > ε;
| zx | > ε.

Similarly, \mathcal{C}_{\varepsilon} denotes a truncated Cauchy integral operator: for a measure μ on C and a point z in C, define

\mathcal{C}_{\varepsilon} (\mu) (z) = \int \frac{1}{\xi - z} \, \mathrm{d} \mu (\xi),

where the integral is taken over those points ξ in C with

| ξ − z | > ε.

References

  • Mel'nikov, Mark S. (1995). "Analytic capacity: a discrete approach and the curvature of measure". Mat. Sb. 186 (6): 57–76. ISSN 0368-8666. 
  • Melnikov, Mark S. and Verdera, Joan (1995). "A geometric proof of the L2 boundedness of the Cauchy integral on Lipschitz graphs". Internat. Math. Res. Notices 1995 (7): 325–331. doi:10.1155/S1073792895000249. 
  • Tolsa, Xavier (2000). "Principal values for the Cauchy integral and rectifiability". Proc. Amer. Math. Soc. 128 (7): 2111–2119. doi:10.1090/S0002-9939-00-05264-3. 

Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Curvature — In mathematics, curvature refers to any of a number of loosely related concepts in different areas of geometry. Intuitively, curvature is the amount by which a geometric object deviates from being flat, or straight in the case of a line, but this …   Wikipedia

  • measure of curvature — curvature 2 …   Useful english dictionary

  • curvature — /kerr veuh cheuhr, choor /, n. 1. the act of curving or the state of being curved. 2. a curved condition, often abnormal: curvature of the spine. 3. the degree of curving of a line or surface. 4. Geom. a. (at a point on a curve) the derivative of …   Universalium

  • measure — 1. To determine the magnitude or quantity of a substance by comparing it to some accepted standard or by calculation. 2. A specified magnitude of a physical quantity. 3. A graduated instrument used to m. an object or substance. [O.F. mesure, fr.… …   Medical dictionary

  • curvature — noun Date: 1603 1. the act of curving ; the state of being curved 2. a measure or amount of curving; specifically the rate of change of the angle through which the tangent to a curve turns in moving along the curve and which for a circle is equal …   New Collegiate Dictionary

  • curvature — cur·va·ture || kɜːvÉ™tʃə n. act of curving, state of being curved; measure of the degree of a curve in a line …   English contemporary dictionary

  • curvature — /ˈkɜvətʃə / (say kervuhchuh) noun 1. the act of curving. 2. curved condition, often abnormal. 3. the degree of curving. 4. something curved. 5. Mathematics a measure of the extent to which a line departs from being straight or a surface departs… …  

  • Menger curvature — In mathematics, the Menger curvature of a triple of points in n dimensional Euclidean space Rn is the reciprocal of the radius of the circle that passes through the three points. It is named after the Austrian American mathematician Karl Menger.… …   Wikipedia

  • Degree of curvature — This article is about the measure of curvature. For other uses, see degree (angle). Degree of curve or degree of curvature is a measure of curvature of a circular arc used in civil engineering for its easy use in layout surveying. A n degree… …   Wikipedia

  • Ricci curvature — In differential geometry, the Ricci curvature tensor, named after Gregorio Ricci Curbastro, provides one way of measuring the degree to which the geometry determined by a given Riemannian metric might differ from that of ordinary Euclidean n… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”