Optical fiber cable

Optical fiber cable
A TOSLINK optical fiber cable with a clear jacket. These plastic-fiber cables are used mainly for digital audio connections between devices.

An optical fiber cable is a cable containing one or more optical fibers. The optical fiber elements are typically individually coated with plastic layers and contained in a protective tube suitable for the environment where the cable will be deployed.

Contents

Design

A multi-fiber cable

In practical fibers, the cladding is usually coated with a layer of acrylate polymer or polyimide. This coating protects the fiber from damage but does not contribute to its optical waveguide properties. Individual coated fibers (or fibers formed into ribbons or bundles) then have a tough resin buffer layer and/or core tube(s) extruded around them to form the cable core. Several layers of protective sheathing, depending on the application, are added to form the cable. Rigid fiber assemblies sometimes put light-absorbing ("dark") glass between the fibers, to prevent light that leaks out of one fiber from entering another. This reduces cross-talk between the fibers, or reduces flare in fiber bundle imaging applications.[1]

Left: LC/PC connectors
Right: SC/PC connectors
All four connectors have white caps covering the ferrules.

For indoor applications, the jacketed fiber is generally enclosed, with a bundle of flexible fibrous polymer strength members like Aramid (e.g. Twaron or Kevlar), in a lightweight plastic cover to form a simple cable. Each end of the cable may be terminated with a specialized optical fiber connector to allow it to be easily connected and disconnected from transmitting and receiving equipment.

An optical fiber breakout cable

For use in more strenuous environments, a much more robust cable construction is required. In loose-tube construction the fiber is laid helically into semi-rigid tubes, allowing the cable to stretch without stretching the fiber itself. This protects the fiber from tension during laying and due to temperature changes. Loose-tube fiber may be "dry block" or gel-filled. Dry block offers less protection to the fibers than gel-filled, but costs considerably less. Instead of a loose tube, the fiber may be embedded in a heavy polymer jacket, commonly called "tight buffer" construction. Tight buffer cables are offered for a variety of applications, but the two most common are "Breakout" and "Distribution". Breakout cables normally contain a ripcord, two non-conductive dielectric strengthening members (normally a glass rod epoxy), an aramid yarn, and 3 mm buffer tubing with an additional layer of Kevlar surrounding each fiber. The ripcord is a parallel cord of strong yarn that is situated under the jacket(s) of the cable for jacket removal.[2] Distribution cables have an overall Kevlar wrapping, a ripcord, and a 900 micrometer buffer coating surrounding each fiber. These fiber units are commonly bundled with additional steel strength members, again with a helical twist to allow for stretching.

A critical concern in outdoor cabling is to protect the fiber from contamination by water. This is accomplished by use of solid barriers such as copper tubes, and water-repellent jelly or water-absorbing powder surrounding the fiber.

Finally, the cable may be armored to protect it from environmental hazards, such as construction work or gnawing animals. Undersea cables are more heavily armored in their near-shore portions to protect them from boat anchors, fishing gear, and even sharks, which may be attracted to the electrical power signals that are carried to power amplifiers or repeaters in the cable.

Modern fiber cables can contain up to a thousand fibers in a single cable, so the performance of optical networks easily accommodates even today's demands for bandwidth on a point-to-point basis. However, unused point-to-point potential bandwidth does not translate to operating profits, and it is estimated that no more than 1% of the optical fiber buried in recent years is actually 'lit'.[citation needed] While unused fiber may not be carrying traffic, it still has value as dark backbone fiber. Companies can lease or sell the unused fiber to other providers who are looking for service in or through an area. Many companies are "overbuilding" their networks for the specific purpose of having a large network of dark fiber for sale. This is a great idea as many cities are difficult to deal with when applying for permits and trenching in new ducts is very costly.

Modern cables come in a wide variety of sheathings and armor, designed for applications such as direct burial in trenches, dual use as power lines,[3][not in citation given] installation in conduit, lashing to aerial telephone poles, submarine installation, or insertion in paved streets. In recent years the cost of small fiber-count pole-mounted cables has greatly decreased due to the high Japanese and South Korean demand for fiber to the home (FTTH) installations.

Reliability and quality

Optical fibers are inherently very strong, but the strength is drastically reduced by unavoidable microscopic surface flaws inherent in the manufacturing process. The initial fiber strength, as well as its change with time, must be considered relative to the stress imposed on the fiber during handling, cabling, and installation for a given set of environmental conditions. There are three basic scenarios that can lead to strength degradation and failure by inducing flaw growth: dynamic fatigue, static fatigues, and zero-stress aging.

Telcordia GR-20, Generic Requirements for Optical Fiber and Optical Fiber Cable, contains reliability and quality criteria to protect optical fiber in all operating conditions.[4] The criteria concentrate on conditions in an outside plant (OSP) environment. For the indoor plant, similar criteria are in Telcordia GR-409, Generic Requirements for Indoor Fiber Optic Cable.[5]

Cable types

  • OFC: Optical fiber, conductive
  • OFN: Optical fiber, nonconductive
  • OFCG: Optical fiber, conductive, general use
  • OFNG: Optical fiber, nonconductive, general use
  • OFCP: Optical fiber, conductive, plenum
  • OFNP: Optical fiber, nonconductive, plenum
  • OFCR: Optical fiber, conductive, riser
  • OFNR: Optical fiber, nonconductive, riser
  • OPGW: Optical fiber composite overhead ground wire
  • ADSS: All-Dielectric Self-Supporting

Jacket material

The jacket material is application specific. The material determines the mechanical robustness, aging due to UV radiation, oil resistance, etc. Nowadays PVC is being replaced by halogen free alternatives, mainly driven by more stringent regulations.

Material Halogen-free UV Resistance Remark
LSFH Polymer Yes Good[6] Good for indoor use
Polyvinyl chloride (PVC) No Good[7] Being replaced by LSFH Polymer
Polyethylene (PE) Yes Poor[8][9][10] Good for outdoor applications
Polyurethane (PUR) Yes ? Highly flexible cables
Polybutylene terephthalate (PBT) Yes Fair?[11] Good for indoor use
Polyamide (PA) Yes Good[12]-Poor[13] Indoor and outdoor use

Color coding

Patch cords

The buffer or jacket on patchcords is often color-coded to indicate the type of fiber used. The strain relief "boot" that protects the fiber from bending at a connector is color-coded to indicate the type of connection. Connectors with a plastic shell (such as SC connectors) typically use a color-coded shell. Standard color codings for jackets and boots (or connector shells) are shown below:

Buffer/jacket color Meaning
Yellow single-mode optical fiber
Orange multi-mode optical fiber
Aqua 10 gig laser-optimized 50/125 micrometer multi-mode optical fiber
Grey outdated color code for multi-mode optical fiber
Blue Sometimes used to designate polarization-maintaining optical fiber
Connector Boot Meaning Comment
Blue Physical Contact (PC), 0° mostly used for single mode fibers; some manufacturers use this for polarization-maintaining optical fiber.
Green Angle Polished (APC), 8° not available for multimode fibers
Black Physical Contact (PC), 0°
Grey, Beige Physical Contact (PC), 0° multimode fiber connectors
White Physical Contact (PC), 0°
Red High optical power. Sometimes used to connect external pump lasers or Raman pumps.

Remark: It is also possible that a small part of a connector is additionally colour-coded, e.g. the leaver of an E-2000 connector or a frame of an adapter. This additional colour coding indicates the correct port for a patchcord, if many patchcords are installed at one point.

Multi-fiber cables

Individual fibers in a multi-fiber cable are often distinguished from one another by color-coded jackets or buffers on each fiber. The identification scheme used by Corning Cable Systems is based on EIA/TIA-598, "Optical Fiber Cable Color Coding." EIA/TIA-598 defines identification schemes for fibers, buffered fibers, fiber units, and groups of fiber units within outside plant and premises optical fiber cables. This standard allows for fiber units to be identified by means of a printed legend. This method can be used for identification of fiber ribbons and fiber subunits. The legend will contain a corresponding printed numerical position number and/or color for use in identification.[14]

EIA598-A Fiber Color Chart[14]
Position Jacket color
1 Blue
2 Orange
3 Green
4 Brown
5 Slate
6 White
7 Red
8 Black
9 Yellow
10 Violet
11 Rose
12 Aqua
13 Blue with black tracer
14 Orange with black tracer
15 Green with black tracer
16 Brown with black tracer
17 Slate with black tracer
18 White with black tracer
19 Red with black tracer
20 Black with yellow tracer
21 Yellow with black tracer
22 Violet with black tracer
23 Rose with black tracer
24 Aqua with black tracer
Color coding of Premise Fiber Cable[14]
Fiber Type / Class Diameter (µm) Jacket Color
Multimode 1a 50/125 Orange
Multimode 1a 62.5/125 Slate
Multimode 1a 85/125 Blue
Multimode 1a 100/140 Green
Singlemode IVa All Yellow
Singlemode IVb All Red

Propagation speed and delay

Optical cables transfer data at around 180,000 to 200,000 km/s, resulting in 5.0 to 5.5 microseconds of latency per km. Thus the round-trip delay time for 1000km is around 11 ms.[15]

Losses

Typical modern Multimode Graded-Index fibers have 3 dB/km of attenuation loss at 850 nm and 1 dB/km at 1300 nm. 9/125 Singlemode loses 0.4/0.25 dB/km at 1310/1550 nm. POF (plastic optical fiber) loses much more: 1 dB/m at 650 nm. Plastic Optical Fiber is large core (about 1mm) fiber suitable only for short, low speed networks such as within cars.[16]

Each connection made adds about 0.6 dB of average loss, and each joint (splice) adds about 0.1 dB.[17] Depending on the transmitter power and the sensitivity of the receiver, if the total loss is too large the link will not function reliably.

Invisible IR light is used in commercial glass fiber communications because it has lower attenuation in such materials than visible light. However, the glass fibers will transmit visible light somewhat, which is convenient for simple testing of the fibers without requiring expensive equipment. Splices can be inspected visually, and adjusted for minimal light leakage at the joint, which maximizes light transmission between the ends of the fibers being joined.

The charts at Understanding Wavelengths In Fiber Optics and Optical power loss (attenuation) in fiber illustrate the relationship of visible light to the IR frequencies used, and show the absorption water bands between 850, 1300 and 1550 nm.

Safety

Because the infrared light used in communications can not be seen, there is a potential laser safety hazard to technicians. In some cases the power levels are high enough to damage eyes, particularly when lenses or microscopes are used to inspect fibers which are inadvertently emitting invisible IR. Inspection microscopes with optical safety filters are available to guard against this.

Small glass fragments can also be a problem if they get under someone's skin, so care is needed to ensure that fragments produced when cleaving fiber are properly collected and disposed of appropriately.

See also

Notes and references

  1. ^ "Light collection and propagation". National Instruments' Developer Zone. http://zone.ni.com/devzone/cda/ph/p/id/129#toc2. Retrieved 2007-03-19. 
    Hecht, Jeff (2002). Understanding Fiber Optics (4th ed. ed.). Prentice Hall. ISBN 0-13-027828-9. 
  2. ^ http://www.its.bldrdoc.gov/fs-1037/dir-031/_4623.htm
  3. ^ "Screening report for Alaska rural energy plan" (pdf). Alaska Division of Community and Regional Affairs. Archived from the original on May 8, 2006. http://web.archive.org/web/20060508191931/http://www.dced.state.ak.us/dca/AEIS/PDF_Files/AIDEA_Energy_Screening.pdf. Retrieved Apr. 11, 2006. 
  4. ^ "GR-20, Generic Requirements for Optical Fiber and Optical Fiber Cable". Telcordia. http://telecom-info.telcordia.com/site-cgi/ido/docs.cgi?ID=111480824D000176&KEYWORDS=&TITLE=&DOCUMENT=GR-20&DATE=&CLASS=&COUNT=1000. 
  5. ^ "GR-409, Generic Requirements for Indoor Fiber Optic Cable". Telcordia. http://telecom-info.telcordia.com/site-cgi/ido/docs.cgi?ID=SEARCH&DOCUMENT=GR-409&. 
  6. ^ http://www.goodfellow.com/E/Polymethylmethacrylate.html
  7. ^ http://www.goodfellow.com/E/Polyvinylchloride-Unplasticised.html
  8. ^ http://www.goodfellow.com/E/Polyethylene-Highdensity.html
  9. ^ http://www.goodfellow.com/E/Polyethylene-LowDensity.html
  10. ^ http://www.goodfellow.com/E/Polyethylene-UHMW.html
  11. ^ http://www.goodfellow.com/E/Polybutyleneterephthalate.html
  12. ^ http://www.goodfellow.com/E/Polyamide-Nylon12-30GlassFibreReinforced.html
  13. ^ http://www.goodfellow.com/E/Polyamide-Nylon6.html
  14. ^ a b c Leroy Davis (2007-02-21). "Fiber wire color coding". http://www.interfacebus.com/Fiber_Insulation_Color_Code.html. Retrieved 2007-12-01. 
  15. ^ Latency and Jitter Retrieved 2011-05-29.
  16. ^ Optical Fiber (tutorial at lanshack.com) Retrieved 2010-08-20.
  17. ^ Calculating the Maximum Attenuation for Optical Fiber Links. Cisco document 27042. Retrieved 2010-08-20.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Optical fiber, nonconductive, riser — (OFNR) is a type of optical fiber cable. As designated by the National Fire Protection Association (NFPA), this name is used for interior fiber optic cables which contain no electrically conductive components, and which are certified for use in… …   Wikipedia

  • Optical fiber — A bundle of optical fibers A TOSLINK fiber optic audio c …   Wikipedia

  • Optical fiber connector — An optical fiber connector terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so that light can pass. Better connectors lose… …   Wikipedia

  • Optical fiber composite overhead ground wire — (OPGW) is a type of cable that is used in the construction of electric power transmission and distribution lines. Such cable combines the functions of grounding and communications. An OPGW cable contains a tubular structure with one or more… …   Wikipedia

  • optical fiber — noun a very thin fiber made of glass that functions as a waveguide for light; used in bundles to transmit images • Syn: ↑glass fiber, ↑optical fibre, ↑glass fibre • Hypernyms: ↑fiber, ↑fibre • Part Holonyms: ↑ …   Useful english dictionary

  • Optical Fiber —   Cable like material which transmits laser beam light much as electricity is transmitted over copper cable. See also Fibre Optic Cable …   International financial encyclopaedia

  • Multi-mode optical fiber — A 1.25 Gbit/s multi mode fiber Multi mode optical fiber (multimode fiber or MM fiber or fibre) is a type of optical fiber mostly used for communication over short distances, such as within a building or on a campus. Typical multimode links… …   Wikipedia

  • Optical communication — is any form of telecommunication that uses light as the transmission medium. An optical communication system consists of a transmitter, which encodes a message into an optical signal, a channel, which carries the signal to its destination, and a… …   Wikipedia

  • Single-mode optical fiber — In fiber optic communication, a single mode optical fiber (SMF) is an optical fiber designed to carry only a single ray of light (mode). This ray of light often contains a variety of different wavelengths. Although the ray travels parallel to the …   Wikipedia

  • Optical Carrier transmission rates — are a standardized set of specifications of transmission bandwidth for digital signals that can be carried on Synchronous Optical Networking (SONET) fiber optic networks.[1] Transmission rates are defined by rate of the bitstream of the digital… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”