Erosion

Erosion

Erosion is the carrying away or displacement of solids (sediment, soil, rock and other particles) usually by the agents of currents such as, wind, water, or ice by downward or down-slope movement in response to gravity or by living organisms (in the case of bioerosion).

Erosion is distinguished from weathering, which is the process of chemical or physical breakdown of the minerals in the rocks, although the two processes may be concurrent.

Erosion is a noticeable intrinsic natural process but in many places it is increased by human land use. Poor land use practices include deforestation, overgrazing, unmanaged construction activity and road-building. Land that is used for the production of agricultural crops generally experiences a significant greater rate of erosion than that of land under natural vegetation. This is particularly true if tillage is used, which reduces vegetation cover on the surface of the soil and disturbs both soil structure and plant roots that would otherwise hold the soil in place. However, improved land use practices can limit erosion, using techniques such as terrace-building, conservation tillage practices, and tree planting.

A certain amount of erosion is natural and, in fact, healthy for the ecosystem. For example, gravels continuously move downstream in watercourses. Excessive erosion, however, does cause problems, such as receiving water sedimentation, ecosystem damage and outright loss of soil.

Causes

The rate of erosion depends on many factors. Climatic factors include the amount and intensity of precipitation, the average temperature, as well as the typical temperature range, and seasonality, the wind speed, storm frequency. The geologic factors include the sediment or rock type, its porosity and permeability, the slope (gradient) of the land, and if the rocks are tilted, faulted, folded, or weathered. The biological factors include ground cover from vegetation or lack thereof, the type of organisms inhabiting the area, and the land use.

In general, given vegetation and ecosystems, you expect areas with high-intensity precipitation, more frequent rainfall, more wind, or more storms to have more erosion. Sediment with high sand or silt contents and areas with steep slopes erode more easily, as do areas with highly fractured or weathered rock. Porosity and permeability of the sediment or rock affect the speed with which the water can percolate into the ground. If the water moves underground, less runoff is generated, reducing the amount of surface erosion. Sediment containing more clay tend to erode less than those with sand or silt. Here, however, the impact of atmospheric sodium on erodibility of clay should be considered. [Schmittner Karl-Erich and Pierre, 1999. The impact of atmospheric sodium on erodibility of clay in a coastal Mediterranean region. Environmental Geology 37/3: 195-206.]

The factor that is most subject to change is the amount and type of ground cover. In an undisturbed forest, the mineral soil is protected by a litter layer and an organic layer. These two layers protect the soil by absorbing the impact of rain drops. These layers and the underlaying soil in a forest is porous and highly permeable to rainfall. Typically only the most severe rainfall and large hailstorm events will lead to overland flow in a forest. If the trees are removed by fire or logging, infiltration rates remain high and erosion low to the degree the forest floor remains intact. Severe fires can lead to significantly increased erosion if followed by heavy rainfall. In the case of construction or road building when the litter layer is removed or compacted the susceptibility of the soil to erosion is greatly increased.

Roads are especially likely to cause increased rates of erosion because, in addition to removing ground cover, they can significantly change drainage patterns especially if an embankment has been made to support the road. A road that has a lot of rock and one that is "hydrologically invisible" (that gets the water off the road as quickly as possible, mimicking natural drainage patterns) has the best chance of not causing increased erosion.

Many human activities remove vegetation from an area, making the soil easily eroded. Logging can cause increased erosion rates due to soil compaction, exposure of mineral soil, for example roads and landings. However it is the removal of or compromise to the forest floor not the removal of the canopy that can lead to erosion. This is because rain drops striking tree leaves coalesce with other rain drops creating larger drops. When these larger drops fall (called throughfall) they again may reach terminal velocity and strike the ground with more energy then had they fallen in the open. Terminal velocity of rain drops is reached in about 8 meters. Because forest canopies are usually higher than this, leaf drop can regain terminal velocity. However, the intact forest floor, with its layers of leaf litter and organic matter, absorbs the impact of the rainfall. [http://treesearch.fs.fed.us/pubs/14744 Concepts about forests and water Author: Stuart, Gordon W.; Edwards, Pamela J.]

Heavy grazing can reduce vegetation enough to increase erosion. Changes in the kind of vegetation in an area can also affect erosion rates. Different kinds of vegetation lead to different infiltration rates of rain into the soil. Forested areas have higher infiltration rates, so precipitation will result in less surface runoff, which erodes. Instead much of the water will go in subsurface flows, which are generally less erosive. Leaf litter and low shrubs are an important part of the high infiltration rates of forested systems, the removal of which can increase erosion rates. Leaf litter also shelters the soil from the impact of falling raindrops, which is a significant agent of erosion. Vegetation can also change the speed of surface runoff flows, so grasses and shrubs can also be instrumental in this aspect.

One of the main causes of erosive soil loss in the year 2006 is the result of slash and burn treatment of tropical forest. When the total ground surface is stripped of vegetation and then seared of all living organisms, the upper soils are vulnerable to both wind and water erosion. In a number of regions of the earth, entire sectors of a country have been rendered unproductive. For example, on the Madagascar high central plateau, comprising approximately ten percent of that country's land area, virtually the entire landscape is sterile of vegetation, with gully erosive furrows typically in excess of 50 meters deep and one kilometer wide. Shifting cultivation is a farming system which sometimes incorporates the slash and burn method in some regions of the world. This degrades the soil and causes the soil to become less and less fertile.

Effects

Approximately 40% of the world's agricultural land is seriously degraded. [ [http://www.guardian.co.uk/environment/2007/aug/31/climatechange.food Global food crisis looms as climate change and population growth strip fertile land] ] According to the UN, an area of fertile soil the size of Ukraine is lost every year because of drought, deforestation and climate change. [ [http://www.sundayherald.com/news/heraldnews/display.var.2104849.0.2008_the_year_of_global_food_crisis.php 2008: The year of global food crisis] ] In Africa, if current trends of soil degradation continue, the continent might be able to feed just 25% of its population by 2025, according to UNU's Ghana-based Institute for Natural Resources in Africa. [ [http://news.mongabay.com/2006/1214-unu.html Africa may be able to feed only 25% of its population by 2025] ]

When land is overused by animal activities (including humans), there can be mechanical erosion and also removal of vegetation leading to erosion. In the case of the animal kingdom, this effect would become material primarily with very large animal herds stampeding such as the Blue Wildebeest on the Serengeti plain. Even in this case there are broader material benefits to the ecosystem, such as continuing the survival of grasslands, that are indigenous to this region. This effect may be viewed as anomalous or a problem only when there is a significant imbalance or overpopulation of one species.

In the case of human use, the effects are also generally linked to overpopulation. For when large numbers of hikers use trails or extensive off road vehicle use occurs, erosive effects often follow, arising from vegetation removal and furrowing of foot traffic and off road vehicle tires. These effects can also accumulate from a variety of outdoor human activities, again simply arising from too many people using a finite land resource.

One of the most serious and long-running water erosion problems worldwide is in the People's Republic of China, on the middle reaches of the Yellow River and the upper reaches of the Yangtze River. From the Yellow River, over 1.6 billion tons of sediment flows into the ocean each year. The sediment originates primarily from water erosion in the Loess Plateau region of the northwest.

Erosion processes

Gravity erosion

"Mass movement" is the down-slope movement of rock and sediments, mainly due to the force of gravity. Mass movement is an important part of the erosional process, as it moves material from higher elevations to lower elevations where other eroding agents such as streams and glaciers can then pick up the material and move it to even lower elevations. Mass-movement processes are always occurring continuously on all slopes; some mass-movement processes act very slowly; others occur very suddenly, often with disastrous results. Any perceptible down-slope movement of rock or sediment is often referred to in general terms as a landslide. However, landslides can be classified in a much more detailed way that reflects the mechanisms responsible for the movement and the velocity at which the movement occurs. One of the visible topographical manifestations of a very slow form of such activity is a scree slope.

"Slumping" happens on steep hillsides, occurring along distinct fracture zones, often within materials like clay that, once released, may move quite rapidly downhill. They will often show a spoon-shaped isostatic depression, in which the material has begun to slide downhill. In some cases, the slump is caused by water beneath the slope weakening it. In many cases it is simply the result of poor engineering along highways where it is a regular occurrence.

"Surface creep" is the slow movement of soil and rock debris by gravity which is usually not perceptible except through extended observation. However, the term can also describe the rolling of dislodged soil particles 0.5 to 1.0 mm in diameter by wind along the soil surface.

Water erosion

"Splash erosion" is the detachment and airborne movement of small soil particles caused by the impact of raindrops on soil.

"Sheet erosion" is the detachment of soil particles by raindrop impact and their removal downslope by water flowing overland as a sheet instead of in definite channels or rills. The impact of the raindrop breaks apart the soil aggregate. Particles of clay, silt and sand fill the soil pores and reduce infiltration. After the surface pores are filled with sand, silt or clay, overland surface flow of water begins due to the lowering of infiltration rates. Once the rate of falling rain is faster than infiltration, runoff takes place. There are two stages of sheet erosion. The first is rain splash, in which soil particles are knocked into the air by raindrop impact. In the second stage, the loose particles are moved downslope by broad sheets of rapidly flowing water filled with sediment known as sheetfloods. This stage of sheet erosion is generally produced by cloudbursts, sheetfloods commonly travel short distances and last only for a short time. "Rill erosion" refers to the development of small, ephemeral concentrated flow paths, which function as both sediment source and sediment delivery systems for erosion on hillslopes. Generally, where water erosion rates on disturbed upland areas are greatest, rills are active. Flow depths in rills are typically on the order of a few centimeters or less and slopes may be quite steep. These conditions constitute a very different hydraulic environment than typically found in channels of streams and rivers. Eroding rills evolve morphologically in time and space. The rill bed surface changes as soil erodes, which in turn alters the hydraulics of the flow. The hydraulics is the driving mechanism for the erosion process, and therefore dynamically changing hydraulic patterns cause continually changing erosional patterns in the rill. Thus, the process of rill evolution involves a feedback loop between flow detachment, hydraulics, and bed form. Flow velocity, depth, width, hydraulic roughness, local bed slope, friction slope, and detachment rate are time and space variable functions of the rill evolutionary process. Superimposed on these interactive processes, the sediment load, or amount of sediment in the flow, has a large influence on soil detachment rates in rills. As sediment load increases, the ability of the flowing water to detach more sediment decreases.

Where precipitation rates exceed soil infiltration rates, "runoff" occurs. Surface runoff turbulence can often cause more erosion than the initial raindrop impact.

"Gully erosion" results where water flows along a linear depression eroding a trench or gully. This is particularly noticeable in the formation of hollow ways, where, prior to being tarmacked, an old rural road has over many years become significantly lower than the surrounding fields.

"Valley" or "stream erosion" occurs with continued water flow along a linear feature. The erosion is both downward, deepening the valley, and headward, extending the valley into the hillside. In the earliest stage of stream erosion, the erosive activity is dominantly vertical, the valleys have a typical V cross-section and the stream gradient is relatively steep. When some base level is reached, the erosive activity switches to lateral erosion, which widens the valley floor and creates a narrow floodplain. The stream gradient becomes nearly flat, and lateral deposition of sediments becomes important as the stream meanders across the valley floor. In all stages of stream erosion, by far the most erosion occurs during times of flood, when more and faster-moving water is available to carry a larger sediment load. In such processes, it is not the water alone that erodes: suspended abrasive particles, pebbles and boulders can also act erosively as they traverse a surface.

At extremely high flows, kolks, or vortices are formed by large volumes of rapidly rushing water. Kolks cause extreme local erosion, plucking bedrock and creating pothole-type geographical features called Rock-cut basins. Examples can be seen in the flood regions result from glacial Lake Missoula, which created the channeled scablands in the Columbia Basin region of eastern Washington. [ cite book
first=David
last=Alt
id=ISBN 0-87842-415-6
location=
title=Glacial Lake Missoula & its Humongous Floods
publisher=Mountain Press Publishing Company
]

horeline erosion

Shoreline erosion, which occurs on both exposed and sheltered coasts, primarily occurs through the action of currents and waves but sea level (tidal) change can also play a role.

"Hydraulic action" takes place when air in a joint is suddenly compressed by a wave closing the entrance of the joint. This then cracks it. "Wave pounding" is when the sheer energy of the wave hitting the cliff or rock breaks pieces off. "Abrasion" or "corrasion" is caused by waves launching seaload at the cliff. It is the most effective and rapid form of shoreline erosion (not to be confused with "corrosion"). "Corrosion" is the dissolving of rock by carbonic acid in sea water. Limestone cliffs are particularly vulnerable to this kind of erosion. "Attrition" is where particles/seaload carried by the waves are worn down as they hit each other and the cliffs. This then makes the material easier to wash away. The material ends up as shingle and sand. Another significant source of erosion, particularly on carbonate coastlines, is the boring, scraping and grinding of organisms, a process termed "bioerosion".

Sediment is transported along the coast in the direction of the prevailing current (longshore drift). When the upcurrent amount of sediment is less than the amount being carried away, erosion occurs. When the upcurrent amount of sediment is greater, sand or gravel banks will tend to form. These banks may slowly migrate along the coast in the direction of the longshore drift, alternately protecting and exposing parts of the coastline. Where there is a bend in the coastline, quite often a build up of eroded material occurs forming a long narrow bank (a spit). armored beaches and submerged offshore sandbanks may also protect parts of a coastline from erosion. Over the years, as the shoals gradually shift, the erosion may be redirected to attack different parts of the shore.

Ice erosion

Ice erosion is caused by movement of ice, typically as glaciers. Glaciers erode predominantly by three different processes: abrasion/scouring, plucking, and ice thrusting. In an abrasion process, debris in the basal ice scrapes along the bed, polishing and gouging the underlying rocks, similar to sandpaper on wood. Glaciers can also cause pieces of bedrock to crack off in the process of plucking. In ice thrusting, the glacier freezes to its bed, then as it surges forward, it moves large sheets of frozen sediment at the base along with the glacier. This method produced some of the many thousands of lake basins that dot the edge of the Canadian Shield. These processes, combined with erosion and transport by the water network beneath the glacier, leave moraines, drumlins, eakers, ground moraine (till), kames, kame deltas, moulins, and glacial erratics in their wake, typically at the terminus or during glacier retreat.

Cold weather causes water trapped in tiny rock cracks to freeze and expand, breaking the rock into several pieces. This can lead to gravity erosion on steep slopes. The scree which forms at the bottom of a steep mountainside is mostly formed from pieces of rock (soil) broken away by this means. It is a common engineering problem wherever rock cliffs are alongside roads, because morning thaws can drop hazardous rock pieces onto the road.

In some places, water seeps into rocks during the daytime, then freezes at night. Ice expands, thus, creating a wedge in the rock. Over time, the repetition in the forming and melting of the ice causes fissures, which eventually breaks the rock down.

Wind erosion

Wind erosion is the result of material movement by the wind. There are two main effects. First, wind causes small particles to be lifted and therefore moved to another region. This is called deflation. Second, these suspended particles may impact on solid objects causing erosion by abrasion (ecological succession).

Wind erosion generally occurs in areas with little or no vegetation, often in areas where there is insufficient rainfall to support vegetation. An example is the formation of sand dunes, on a beach or in a desert. Windbreaks (such as big trees and bushes) are often planted by farmers to reduce wind erosion.

oil erosion and climate change

The consensus of atmospheric scientists is that climate change is occurring, both in terms of global air temperature and precipitation patterns. Warmer atmospheric temperatures associated with greenhouse warming are expected to lead to a more vigorous hydrological cycle, including more extreme rainfall events. [IPCC. 1995. Second Assessment Synthesis of Scientific-Technical Information relevant to interpreting Article 2 of the UN Framework Convention on Climate Change. Intergovernmental Panel on Climate Change. Geneva, Switzerland. 64 pp.] In 1998 Karl and Knight reported that from 1910 to 1996 total precipitation over the contiguous U.S. increased, and that 53% of the increase came from the upper 10% of precipitation events (the most intense precipitation). [Karl, T.R. and R. W. Knight. 1998. Secular trend of precipitation amount, frequency, and intensity in the United States. Bulletin of the American Meteorological Society 79:231-242.] The percent of precipitation coming from days of precipitation in excess of 50 mm has also increased significantly.

Studies on soil erosion suggest that increased rainfall amounts and intensities will lead to greater rates of erosion. Thus, if rainfall amounts and intensities increase in many parts of the world as expected, erosion will also increase, unless amelioration measures are taken. Soil erosion rates are expected to change in response to changes in climate for a variety of reasons. The most direct is the change in the erosive power of rainfall. Other reasons include: a) changes plant canopy caused by shifts in plant biomass production associated with moisture regime; b) changes in litter cover on the ground caused by changes in both plant residue decomposition rates driven by temperature and moisture dependent soil microbial activity as well as plant biomass production rates; c) changes in soil moisture due to shifting precipitation regimes and evapo-transpiration rates, which changes infiltration and runoff ratios; d) soil erodibility changes due to decrease in soil organic matter concentrations in soils that lead to a soil structure that is more susceptible to erosion and increased runoff due to increased soil surface sealing and crusting; e) a shift of winter precipitation from non-erosive snow to erosive rainfall due to increasing winter temperatures; f) melting of permafrost, which induces an erodible soil state from a previously non-erodible one; and g) shifts in land use made necessary to accommodate new climatic regimes.

Studies by Pruski and Nearing indicated that, other factors such as land use not considered, we can expect approximately a 1.7% change in soil erosion for each 1% change in total precipitation under climate change. [Pruski, F. F. and M.A. Nearing. 2002. Runoff and soil loss responses to changes in precipitation: a computer simulation study. Journal of Soil and Water Conservation 57(1), 7-16.]

Tectonic effects of erosion

The removal by erosion of large amounts of rock from a particular region, and its deposition elsewhere, can result in a lightening of the load on the lower crust and mantle. This can cause tectonic or isostatic uplift in the region. Research undertaken since the early 1990s suggests that the spatial distribution of erosion at the surface of an orogen can exert a key influence on its growth and its final internal structure (see erosion and tectonics). [Willett, Sean D., et al, "Tectonics, Climate and Landscape Evolution", Geological Society of America Special Paper 398, 2006 ISBN 0-8137-2398-1 [http://earth.geology.yale.edu/~brandon/Eprints/Willett%20etal2006GSASP390_Introduction.pdf PDF of Introduction] ]

Materials science

In materials science, erosion is the recession of surfaces by repeated localized mechanical trauma as, for example, by suspended abrasive particles within a moving fluid. Erosion can also occur from non-abrasive fluid mixtures. Cavitation is one example.

In hard particle erosion, the hardness of the impacted material is a large factor in the mechanics of the erosion. A soft material will typically erode fastest from glancing impacts. [Finnie, I., Erosion of surfaces by solid particles. Wear, 1960. 3(2): p. 87.] Harder material will typically erode fastest from perpendicular impacts. Hardness is a correlative factor for erosion resistance, but a higher hardness does not guarantee better resistance. Factors that affect the erosion rate also include impacting particle speed, size, density, hardness, and rotation. Coatings can be applied to retard erosion, but normally can only slow the removal of material. Erosion rate for solid particle impact is typically measured as mass of material removed divided by the mass of impacting material. [ASTM G76-07]

Figurative use

The concept of erosion is commonly employed by analogy to various forms of perceived or real homogenization (i.e. erosion of boundaries), "leveling out", collusion or even the decline of anything from morals to indigenous cultures. It is a common trope of the English language to describe as "erosion" the gradual, organic mutation of something thought of as distinct, more complex, harder to pronounce or more refined into something indistinct, less complex, easier to pronounce or (disparagingly) less refined.

Origin of term

The first known occurrence of the term "erosion" was in the 1541 translation by Robert Copland of Guy de Chauliac's medical text "The Questyonary of Cyrurygens". Copland used erosion to describe how ulcers developed in the mouth. By 1774 'erosion' was used outside medical subjects. Oliver Goldsmith employed the term in the more contemporary geological context, in his book "Natural History", with the quote:"Bounds are thus put to the erosion of the earth by water"."

ee also


*Badland
*Bioerosion
*Biorhexistasy
*Cellular confinement
*Deforestation
*Desertification
*Erosion control
*Erosion prediction
*Food security
*Geography
*Groundwater sapping
*Riparian strips
*Sediment transport
*Sphericity scale
*Surface runoff
*TERON (Tillage erosion)
*Vegetation and slope stability

Notes

* World Bank 2001: China: Air, Land, and Water.
* [http://eusoils.jrc.it/ESDB_Archive/pesera/pesera_cd/index.htm Pan European Soil Erosion Assessment]

Further reading

*
*Montgomery, David R. (2007) [http://www.pnas.org/content/104/33/13268.abstract Soil erosion and agricultural sustainability] PNAS 104: 13268-13272.

External links

* [http://www.soilerosion.net/ The Soil Erosion Site]
* [http://www.ieca.org/ International Erosion Control Association]
* [http://www.ars.usda.gov/main/site_main.htm?modecode=36021500 USDA National Soil Erosion Laboratory]
* [http://www.swcs.org/ The Soil and Water Conservation Society]
* [http://www.isco.org/ International Soil Conservation Organization]
* [http://www.wooster.edu/geology/Bioerosion/Bioerosion.html Bioerosion website at The College of Wooster]
* [http://www.erozja.iung.pulawy.pl/ Pulawy Erosion Research Center]
* [http://www.tucson.ars.ag.gov/SWRC/MAINSITE/main/site_mainb77c.html Southwest Watershed Research Center]


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую
Synonyms:

Look at other dictionaries:

  • Erosion — Erosion …   Deutsch Wörterbuch

  • ÉROSION — Les articles relatifs à l’érosion mettent en général l’accent sur l’inventaire des agents de l’érosion et sur la description des mécanismes qui en règlent l’intensité. Un de leurs objectifs essentiels est de montrer comment l’érosion constitue un …   Encyclopédie Universelle

  • Erosion — Érosion Pour les articles homonymes, voir Érosion (homonymie). Fichier:Bryce Canyon Hoodoo Row.jpg Les pinacles de Bryce Canyon dans l Utah, aux États Unis. La roche a été façonnée par l érosion …   Wikipédia en Français

  • Erosión — Saltar a navegación, búsqueda Se denomina erosión al proceso de sustracción o desgaste de la roca del suelo intacto (roca madre), por acción de procesos geológicos exógenos como las corrientes superficiales de agua o hielo glaciar, el viento o la …   Wikipedia Español

  • Erosion — Erosion, auch Abtragung, die Gesamtheit derjenigen mechanischen und auch chemischen Erscheinungen, die auf die Zerstörung, vornehmlich aber auf die mechanische Auflockerung der Gesteine und auf die Weiterbeförderung der Bruchstücke und kleinen… …   Lexikon der gesamten Technik

  • Erosion — (v. lat. erodere ‚abtragen‘), als Vorgang Erodieren, steht für: Erosion (Geologie), im geologischen Sinne der Prozess des Abtrags von verwittertem Gestein und Boden Bodenerosion, Abtrag von Boden durch Wind und Wasser; verstärkt durch… …   Deutsch Wikipedia

  • Erosion — E*ro sion, n. [L. erosio. See {Erode}.] 1. The act or operation of eroding or eating away. [1913 Webster] 2. The state of being eaten away; corrosion; canker. [1913 Webster] 3. The wearing away of the earth s surface by any natural process. The… …   The Collaborative International Dictionary of English

  • Erosion — Sf zerstörende Wirkung der Witterung auf die Erdoberfläche erw. fach. (19. Jh.) Entlehnung. Entlehnt aus l. ērōsio ( ōnis) das Zerfressenwerden , einer Ableitung von l. ērōdere wegnagen , zu l. rōdere nagen und l. ex . Verb: erodieren.    Ebenso… …   Etymologisches Wörterbuch der deutschen sprache

  • erosión — sustantivo femenino 1. (no contable) Desgaste que en la superficie de un cuerpo produce el roce de otro cuerpo: La erosión de las pisadas hace que los escalones del metro estén así de gastados. 2. (no contable) Área: geología Desgaste de la… …   Diccionario Salamanca de la Lengua Española

  • erosión — gradual destrucción por desgaste de una superficie, como la de una mucosa o la de la epidermis, como consecuencia de un proceso inflamatorio, lesiones u otros efectos CIE 10 [véase http://www.iqb.es/patologia/erosion.htm] imagen clínica [véase… …   Diccionario médico

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”