Lighting control console

Lighting control console

A lighting control console (also called a lightboard, lighting board, or lighting desk) is an electronic device used in theatrical lighting design to control multiple lights at once. They are used throughout the entertainment industry and are normally placed at the Front of House (FOH) position or in a control booth.

All lighting control consoles can control dimmers which, in turn, control the intensity of the lights. Many modern consoles can also control automated lighting (lights that can move and change colors), fog machines and hazers, and other special effects devices.

Lighting consoles communicate with the dimmers and other devices in the lighting system via an electronic control protocol. The most common protocol used in the entertainment industry today is DMX-512, although other protocols (e.g. 0-10 V analog lighting controlmay still be found in use, and newer protocols such as ACNand DMX-512-A are evolving to meet the demands of ever increasing device sophistication.

Types of control consoles

Consoles vary in size and complexity, from small preset boards to dedicated moving light consoles. The purpose of all lighting consoles, however is the same: to consolidate control of the lights into an organized, easy-to-use system, so that the lighting designer can concentrate on producing a good show. Most consoles accept MIDI Show Control signals and commands to allow show control systems to integrate their capabilities into more complex shows.

Preset boards

Preset boards are the most basic lighting consoles — and also the most prevalent in smaller installations. They consist of two or more identical fader banks, called scenes. The faders (control slides) on these scenes can be manually adjusted. Each scene has the same number of channels which control the same dimmers. So the console operator can build a scene offline, a cross-fader or submaster is used to selectively mix or fade between the different scenes.Most modern state of the art consoles such as the LSC Maxim series (www.lsclightingaustralia.com.au) however have a stack master which requires a preprogrammed set of scenes to be added to a master known as the stack master.These scenes have to be added in the required order scene by scene act by act.At the end the operator/designer has to do nothing other than tap a button at the change of a scene.Blackout's,movements of intelligent lights etc are all easily recordable.

Generally, at least with a preset board operator, he has a cue sheet for each scene, which is a diagram of the board with the faders in their positions as determined by the lighting designer. The operator sets the faders into their positions based on the cue sheets. Typically during a cue, the operator sets the next scene. Then, the operator makes the transition between the scenes using the cross-fader.

Preset boards are not as prevalent since the advent of digital consoles, which can store scenes digitally, and are generally much less cumbersome than preset boards. However, for small setups such as that of a DJ, they remain the board of choice for their simple to use interface and relative flexibility. Preset boards generally control only conventional lights; though some advanced consoles can be patched to operate intelligent lights in a round-about way by setting the control channels of the light to channels the preset board can control.This is however not recommended since it is a long drawn out and cumbersome process.

Memory consoles

Memory-based consoles have become very popular in almost all larger installations, particularly theatres. This type of controller has almost completely replaced preset consoles as controllers of choice. Memory consoles are preferable in productions where scenes do not change from show to show, such as a theatre production, because scenes are designed and digitally recorded, so there is less room for human error, and less time between lighting cues is required to produce the same result. They also allow for lighting cues to contain larger channel counts due to the same time savings gained from not physically moving individual channel faders.

Many memory consoles have a bank of faders often called submasters. These submasters can be programmed to control a single channel (a channel is a lighting designer's numerical name for a dimmer or group of dimmers) or a group of channels. The console may also have provision to operate in analog to a manual desk for programming scenes or live control. On some more advanced consoles, submasters can be used to control effects, chases (sequences of cues), and moving light effects (if the console can control moving lights).

Moving light controllers

Moving Light Controllers are another step up in sophistication from Memory Consoles. As well as being capable of controlling ordinary luminares via dimmers, they provide additional controls for intelligent fixtures. On midrange controllers, these are usually provided as a section separate from main Preset and Cue stack controls. These include an array of buttons allowing the operator to select the fixture or fixtures they want to control, and a number of wheels or rotary encoders to control fixture attributes such as the orientation (pan and tilt), focus, colour, gobos etc. found in this type of light. Unlike a fader that shows its value based on the position of a slider, a wheel is continuously variable and provides no visual feedback for the value of a particular control. Some form of display such as LCD or LED is therefore vital for displaying this information. More advanced desks typically have one or more touchscreens, and present a GUI that integrates all the aspects of the lighting.

As there is no standard way of controlling an intelligent light, an important function for this type of desk is to consolidate the various ways in which the hundreds of types of intelligent lights are controlled into a single "abstract" interface for the user. By integrating knowledge of different fixtures and their attributes into the lighting desk software, the detail of how an attribute such as pan or tilt is controlled for one device vs. another can be hidden from the operator. This frees the operator to think in terms of what they want to achieve (e.g. pan 30 degrees clockwise) instead of how it is achieved for any given fixture (e.g. send value 137 down channel 23). Furthermore, should a lighting fixture need to be replaced with one from a different vendor that has different control sequences, no change need be apparent to the control operator. For some further discussion on how intelligent fixtures are controlled, see Digital Multiplex.

Personal computer-based controllers

Personal Computer (PC) based controllers are relatively new, and use software with a feature set similar to that found in a hardware-based console. As dimmers, automated fixtures and other standard lighting devices do not generally have current standard computer interfaces, options such as DMX-512 ports and fader/submaster panels connected via USB are commonplace.

This system allows a "build-to-fit" approach: the end user initially provides a PC that fits their budget and any other needs with future options to improve the system, for example, by increasing the number of DMX outputs or additional console style panels.

Many lightboard vendors offer a PC software version of their consoles. Commercial lighting control software often requires a specific, and possibly expensive, hardware DMX interface. However, inexpensive (<$150) DMX PC interfaces and free or Open source software are available.

Many console vendors also make a software simulator or "offline editor" for their hardware consoles, and these are often downloadable for free. The simulator can be used to pre-program a show, and the cues then loaded into the actual console. In addition, lighting visualization software is available to simulate and approximate how lighting will appear on stage, and this can be useful for programming effects and spotting obvious programming errors such as incorrect colour changes.

Remote focus unit

Many memory consoles have an optional Remote Focus Unit (RFU) controller that can be attached to the light board and used to control the board's functions (though usually in some limited capacity). They are usually small enough to be handheld. This is ideal in situations where moving the light board is impractical, but control is needed away from where the board is; i.e. if the light board is in a control room that is far from the fixtures, such as a catwalk, an RFU can be attached and an electrician or the lighting designer can bring it to a location which is close to the lights. Some of the newer, more advanced boards have RFUs that can be connected through USB or even wirelessly.

External links

* [http://www.strandarchive.co.uk Strand Archive]

ee also

* Lighting control systems for a building or residence.
* Light board operator- the person working the lightboard.
* List of theatrical lighting control manufacturers


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Lighting control system — consists of a device, typically an embedded processor or industrial computer, that controls electric lights for a building or residence. Lighting control systems usually include one or more keypads or touch panel interfaces. These interfaces… …   Wikipedia

  • Console — Contents 1 Computing and video games 2 Music 3 Other 4 Se …   Wikipedia

  • Control panel (engineering) — A control panel is a flat, often vertical, area where control or monitoring instruments are displayed. They are found in factories to monitor and control machines or production lines and in places such as nuclear power plants, ships, aircraft and …   Wikipedia

  • Lighting designer — The role of the lighting designer (or LD) within theatre is to work with the director, set designer, costume designer, and sometimes the sound designer and choreographer to create an overall look for the show in response to the text, while… …   Wikipedia

  • Intelligent lighting — A Martin MAC 550 intelligent light Intelligent lighting refers to stage lighting that has automated or mechanical abilities beyond those of traditional, stationary illumination. Although the most advanced intelligent lights can produce… …   Wikipedia

  • Stage lighting — Modern stage lighting is a flexible tool in the production of theatre, dance, opera and other performance arts. Several different types of stage lighting instruments are used in the pursuit of the various principles or goals of lighting.… …   Wikipedia

  • Gobo (lighting) — For other uses, see Gobo (disambiguation). A gobo in a gobo holder, which goes in a stage lighting instrument. The discolored portion is oxidation of the stainless steel caused by the high temperature of the lamp, but the gobo is still usable. A… …   Wikipedia

  • Strand Lighting — Infobox Company company company name = Strand Lighting company type = Private parent = Royal Philips Lighting foundation = 1914 (London) location = Cypress, California, USA industry = Stage Television Lighting products = homepage =… …   Wikipedia

  • console — console1 consolable, adj. consoler, n. consolingly, adv. /keuhn sohl /, v.t., consoled, consoling. to alleviate or lessen the grief, sorrow, or disappointment of; give solace or comfort: Only his children could console him when his wife died.… …   Universalium

  • Automotive lighting — Blinker redirects here. For other uses, see Blinker (disambiguation). Not to be confused with Magneti Marelli company AL Automotive Lighting. For lights in seafaring and aviation, see navigation light. The lighting system of a motor vehicle… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”