Equatorial mount

An equatorial mount is a mount that has one rotational axis parallel to the Earth's axis of rotation [cite web | url = http://www.astrogea.org/soldevilla/las_monturas.htm | title = LAS MONTURAS | publisher = Observatorio J. A. Soldevilla] [cite web | url = http://www.oarval.org/LXD55PolAlign.htm | title = Observatorio ARVAL - Polar Alignment for Meade LXD55/75 Autostar telescopes | publisher = Observatorio ARVAL] . This type of mount is used with telescopes, satellite dishes, and cameras. The advantage of an equatorial mount lies in its ability to allow the instrument attached to it to stay fixed on any object in the sky that has a diurnal motion by driving one axis at a constant speed. When used with satellite dishes, an equatorial mount allows the dish to be pointed at several geosynchronous satellites by slewing along one axis.

Telescope mounts

In equatorial mounts for telescopes, the equatorial axis (the "right ascension") is paired with a second perpendicular axes of motion (known as the "declination"). Equatorial mounts are often equipped with a motor drive for automatic tracking of objects across the sky. They may also be equipped with setting circles to allow for the location of objects by their celestial coordinates. Equatorial mounts differ from mechanically simpler altazimuth mounts, which require variable speed motion around both axes to track the a fixed object in the sky. Also, for astrophotography, the image does not rotate in the focal plane, as occurs with altazimuth mounts when they are guided to track the target's motion, unless a rotating erector prism or other field-derotator is installed.

Equatorial telescope mounts come in many designs. In the last twenty years motorized tracking has increasingly been supplemented with computerized object location. There are two main types. Digital setting circles take a small computer with an object database that is attached to encoders. The computer monitors the telescope's position in the sky. The operator must push the telescope. Go-to systems use (in most cases) servo motors and the operator need not touch the instrument at all to change its position in the sky. The computers in these systems are typically either hand-held in a control "paddle" or supplied through an adjacent lap-top computer which is also used to capture images from an electronic camera. The electronics of modern telescope systems often include a port for autoguiding. A special instrument tracks a star and makes adjustment in the telescope's position while photographing the sky. To do so the autoguider must be able to issue commands through the telescope's control system. These commands can compensate for very slight errors in the tracking performance, such as periodic error caused by the worm drive that makes the telescope move.

In new observatory designs, equatorial mounts have been out of favor for decades in large-scale professional applications. Massive new instruments are most stable when mounted in an alt-azimuth (up down, side-to-side) configuration. Computerized tracking and field-derotation are not difficult to implement at the professional level. At the amateur level, however, equatorial mounts remain popular, particularly for astrophotography.

English mount

The "English mount" [cite web | url = http://www.quadibloc.com/science/opt03.htm | title = Telescope Mountings | publisher = 2001, 2004 John J. G. Savard] system is like a big "plus" sign (+). The "right ascension" axis is supported at both ends, and the "declination" axis is attached to it at approximately mid point.

The telescope is placed on one end of the declination axis, and a suitable counterweight on other end of it.

German mount

In the German mount [cite web | url = http://www.mathis-instruments.com/fork_german.html | title = German and Fork Equatorial Mounts | publisher = 2002-2007 Mathis-Instruments] the primary structure is a T-shape, where the lower bar is the "right ascension" axis,and the upper bar is the "declination" axis. The right ascension axis has bearings below the T-joint, that is, it is not supported above the declination axis.

The telescope is placed on one end of the declination axis, and suitable counterweight on other end of it.

This is most common type of telescope mounts, and many amateur telescopes from 60 mm (2.4") refractors to 350 mm (14") Schmidt-Cassegrain telescopes are mounted on this mount.

English fork

The English Fork [cite web | url = http://brunelleschi.imss.fi.it/museum/esim.asp?c=202501 | title = IMSS - Multimedia Catalogue - Glossary - Telescope mounts | publisher = 1995-2006 IMSS Piazza dei Giudici 1 50122 Florence ITALY] has a frame which has "right ascension" axis bearings at the top and the bottom ends, and the "declination" axis at its approximate midpoint. The telescope is usually fitted entirely inside the fork, although there are exceptions such as the Mt. Wilson 2.5 m reflector, and there are no counterweights like "German mount" has.

The original "English fork" design has the disadvantage of not allowing the telescope to point too near the north or south celestial pole. Later modifications have overcome this problems, for example the Hale telescope which has had its mount changed into a huge horse shoe so that it can point to the north celestial pole.

Open fork

Most modern mass-produced catadioptric reflecting telescopes (200 mm or larger diameter) tend to be of this type. The mount resembles an Altazimuth mount, but with the azimuth axis is tilted and lined up to match earth rotation axis with a piece of hardware usually called a "wedge." [cite web | url = http://www.universetoday.com/guide-to-space/telescopes/telescope-mount/ | title = Telescope Mount | publisher = Universe Today]

Many mid-size professional telescopes also have "equatorial forks", these are usually in range of 0.5-2.0 meter diameter.

ee also

* Equatorial room
* Telescope
* Telescope mount
* Altazimuth mount

References