Pharmaceutical formulation

Pharmaceutical formulation

Pharmaceutical formulation, in pharmaceutics, is the process in which different chemical substances, including the active drug, are combined to produce a final medicinal product.

Contents

Stages and timeline

Formulation studies involve developing a preparation of the drug which is both stable and acceptable to the patient. For orally taken drugs, this usually involves incorporating the drug into a tablet or a capsule. It is important to appreciate that a tablet contains a variety of other substances apart from the drug itself, and studies have to be carried out to ensure that the drug is compatible with these other substances.

Preformulation involves the characterization of a drug's physical, chemical, and mechanical properties in order to choose what other ingredients should be used in the preparation. In dealing with protein pre-formulation, the important aspect is to understand the solution behavior of a given protein under a variety of stress conditions such as freeze/thaw, temperature, shear stress among others to identify mechanisms of degradation and therefore its mitigation.[1]


Formulation studies then consider such factors as particle size, polymorphism, pH, and solubility, as all of these can influence bioavailability and hence the activity of a drug. The drug must be combined with inactive additives by a method which ensures that the quantity of drug present is consistent in each dosage unit e.g. each tablet. The dosage should have a uniform appearance, with an acceptable taste, tablet hardness, or capsule disintegration.

It is unlikely that formulation studies will be complete by the time clinical trials commence. This means that simple preparations are developed initially for use in phase I clinical trials. These typically consist of hand-filled capsules containing a small amount of the drug and a diluent. Proof the long-term stability of these formulations is not required, as they will be used (tested) in a matter of days. Consideration has to be given to what is called the drug load - the ratio of the active drug to the total contents of the dose. A low drug load may cause homogeneity problems. A high drug load may pose flow problems or require large capsules if the compound has a low bulk density.

By the time phase III clinical trials are reached, the formulation of the drug should have been developed to be close to the preparation that will ultimately be used in the market. A knowledge of stability is essential by this stage, and conditions must have been developed to ensure that the drug is stable in the preparation. If the drug proves unstable, it will invalidate the results from clinical trials since it would be impossible to know what the administered dose actually was. Stability studies are carried out to test whether temperature, humidity, oxidation, or photolysis (ultraviolet light or visible light) have any effect, and the preparation is analysed to see if any degradation products have been formed.

It is also important to check whether there are any unwanted interactions between the preparation and the container. If a plastic container is used, tests are carried out to see whether any of the ingredients become adsorbed on to the plastic, and whether any plasticizers, lubricants, pigments, or stabilizers leach out of the plastic into the preparation. Even the adhesives for the container label need to be tested, to ensure they do not leach through the plastic container into the preparation.

Oral formulations

The way a drug is formulated can avoid some of the problems associated with oral administration.

Drugs are normally taken orally as tablets or capsules.

The drug (active substance) itself needs to be soluble in aqueous solution at a controlled rate. Such factors as particle size and crystal form can significantly affect dissolution. Fast dissolution is not always ideal. For example, slow dissolution rates can prolong the duration of action or avoid initial high plasma levels. Treatment of active ingredient by special way as spherical crystallization[2] can have some advantages for drug formulation.

Tablet form

A tablet is usually a compressed preparation that contains:

  • 5-10% of the drug (active substance);
  • 80% of fillers, disintegrants, lubricants, glidants, and binders; and
  • 10% of compounds which ensure easy disintegration, disaggregation, and dissolution of the tablet in the stomach or the intestine.

The disintegration time can be modified for a rapid effect or for sustained release.

Special coatings can make the tablet resistant to the stomach acids such that it only disintegrates in the duodenum, jejunum and colon as a result of enzyme action or alkaline pH.

Pills can be coated with sugar, varnish, or wax to disguise the taste.

Some tablets are designed with an osmotically active core, surrounded by an impermeable membrane with a pore in it. This allows the drug to percolate out from the tablet at a constant rate as the tablet moves through the digestive tract.

Capsule form

A capsule is a gelatinous envelope enclosing the active substance. Capsules can be designed to remain intact for some hours after ingestion in order to delay absorption. They may also contain a mixture of slow- and fast-release particles to produce rapid and sustained absorption in the same dose.

Topical medication forms

(Source: [3])

  • Cream - Emulsion of oil and water in approximately equal proportions. Penetrates stratum corneum outer layer of skin well.
  • Ointment - Combines oil (80%) and water (20%). Effective barrier against moisture loss.
  • Gel - Liquefies upon contact with the skin.
  • Paste - Combines three agents - oil, water, and powder; an ointment in which a powder is suspended.
  • Powder - they were finely subdivide substances, which are used as antiseptic and prurient action.

See also

References

  1. ^ Simler, R., Walsh, G., Mattaliano, R.J., Guziewicz, N., and Perez-Ramirez, B. (2008). Maximizing Data Collection and Analysis During Preformulation of Biotherapeutic Proteins. BioProcess International 6(10), 38-45.
  2. ^ M. Nocent, L. Bertocchi, F. Espitalier, M. Baron and G. Couarraze. (2001). Definition of a solvent system for spherical crystallization of salbutamol sulfate by quasi-emulsion solvent diffusion (QESD) method. Journal of Pharmaceutical Sciences 90 (10), 1620-1627.
  3. ^ Doctor, why are you prescribing an ointment?; American Academy of Dermatology; http://www.skincarephysicians.com/eczemanet/doctor.html

Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Formulation — may refer to:* Pharmaceutical formulation * Pesticide formulation …   Wikipedia

  • Pharmaceutical manufacturing — Drug manufacturing is the process of industrial scale synthesis of pharmaceutical drugs by pharmaceutical companies. See also Chemical reactor Chemical engineering Pharmaceutical formulation Medical science liaison This organic chemistry articl …   Wikipedia

  • Pharmaceutical engineering — is a branch of pharmaceutical science and technology that involves development and manufacturing of products, processes, and components in the pharmaceuticals industry (i.e. drugs biologics). While developing pharmaceutical products involves many …   Wikipedia

  • Pharmaceutical policy — is a branch of health policy that deals with the development, provision and use of medications within a health care system. It embraces drugs (both brand name and generic), biologics (products derived from living sources, as opposed to chemical… …   Wikipedia

  • Pharmaceutical industry — The pharmaceutical industry develops, produces, and markets drugs licensed for use as medications.[1] Pharmaceutical companies are allowed to deal in generic and/or brand medications and medical devices. They are subject to a variety of laws and… …   Wikipedia

  • pharmaceutical industry — Producers of pharmaceuticals, substances used in the diagnosis, treatment, and prevention of disease and the modification of organic functions. The earliest records of medicinal plants and minerals are those of the ancient Chinese, Hindu, and… …   Universalium

  • Pharmaceutical industry in the People's Republic of China — The pharmaceutical industry is one of the leading industries in People s Republic of China, covering synthetic chemicals and drugs, prepared Chinese medicines, medical devices, apparatus and instruments, hygiene materials, packing materials, and… …   Wikipedia

  • Pharmaceutical sciences — The pharmaceutical sciences are a group of interdisciplinary areas of study involved with the design, action, delivery, disposition, and use of drugs. This field draws on many areas of the basic and applied sciences, such as chemistry (organic,… …   Wikipedia

  • Pesticide formulation — The biological activity of a pesticide, be it chemical or biological in nature, is determined by its active ingredient (AI also called the active substance ). Pesticide products very rarely consist of pure technical material. The AI is usually… …   Wikipedia

  • Galenic formulation — deals with the principles of preparing and compounding medicines in order to optimize their absorption. The formulation of a medicine has an impact on the pharmacokinetics, pharmacodynamics and safety profile of a drug. Galenic formulation is… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”