Ideal gas

Ideal gas

An ideal gas is a theoretical gas composed of a set of randomly-moving, non-interacting point particles. The ideal gas concept is useful because it obeys the ideal gas law, a simplified equation of state, and is amenable to analysis under statistical mechanics.

At normal conditions such as standard temperature and pressure, most real gases behave qualitatively like an ideal gas. Many gases such as air, nitrogen, oxygen, hydrogen, noble gases, and some heavier gases like carbon dioxide can be treated like ideal gases within reasonable tolerances.[1] Generally, a gas behaves more like an ideal gas at higher temperature and lower density (i.e. lower pressure),[1] as the work performed by intermolecular forces becomes less significant compared with the particles' kinetic energy, and the size of the molecules becomes less significant compared to the empty space between them.

The ideal gas model tends to fail at lower temperatures or higher pressures, when intermolecular forces and molecular size become important. It also fails for most heavy gases, such as water vapor or many refrigerants.[1] At some point of low temperature and high pressure, real gases undergo a phase transition, such as to a liquid or a solid. The model of an ideal gas, however, does not describe or allow phase transitions. These must be modeled by more complex equations of state.

The ideal gas model has been explored in both the Newtonian dynamics (as in "kinetic theory") and in quantum mechanics (as a "gas in a box"). The ideal gas model has also been used to model the behavior of electrons in a metal (in the Drude model and the free electron model), and it is one of the most important models in statistical mechanics.

Contents

Types of ideal gas

There are three basic classes of ideal gas:

  • the classical or Maxwell-Boltzmann ideal gas,
  • the ideal quantum Bose gas, composed of bosons, and
  • the ideal quantum Fermi gas, composed of fermions.

The classical ideal gas can be separated into two types: The classical thermodynamic ideal gas and the ideal quantum Boltzmann gas. Both are essentially the same, except that the classical thermodynamic ideal gas is based on classical statistical mechanics, and certain thermodynamic parameters such as the entropy are only specified to within an undetermined additive constant. The ideal quantum Boltzmann gas overcomes this limitation by taking the limit of the quantum Bose gas and quantum Fermi gas in the limit of high temperature to specify these additive constants. The behavior of a quantum Boltzmann gas is the same as that of a classical ideal gas except for the specification of these constants. The results of the quantum Boltzmann gas are used in a number of cases including the Sackur-Tetrode equation for the entropy of an ideal gas and the Saha ionization equation for a weakly ionized plasma.

Classical thermodynamic ideal gas

The thermodynamic properties of an ideal gas can be described by two equations: The equation of state of a classical ideal gas is the ideal gas law

PV = nRT\,

and the internal energy of an ideal gas given by:

U = \hat{c}_V nRT

where

The amount of gas in J·K−1 is

nR=N k_B\

where

The probability distribution of particles by velocity or energy is given by the Boltzmann distribution.

The ideal gas law is an extension of experimentally discovered gas laws. Real fluids at low density and high temperature approximate the behavior of a classical ideal gas. However, at lower temperatures or a higher density, a real fluid deviates strongly from the behavior of an ideal gas, particularly as it condenses from a gas into a liquid or solid. The deviation is expressed as a compressibility factor.

Heat capacity

The heat capacity at constant volume of nR = 1 J·K−1 of any gas, including an ideal gas is:

\left(\frac{\partial U}{\partial T}\right)_V =\hat{c}_V.

This is the dimensionless heat capacity at constant volume, which is generally a function of temperature due to intermolecular forces. For moderate temperatures, the constant for a monoatomic gas is \hat{c}_V=3/2 while for a diatomic gas it is \hat{c}_V=5/2. It is seen that macroscopic measurements on heat capacity provide information on the microscopic structure of the molecules.

The heat capacity at constant pressure of 1 J·K−1 ideal gas is:

\hat{c}_p = \left(\frac{\partial H}{\partial T}\right)_p = \hat{c}_V+R

where H = U + pV is the enthalpy of the gas.

Sometimes, a distinction is made between an ideal gas, where \hat{c}_V and \hat{c}_p could vary with pressure and temperature, and a perfect gas, for which this is not the case.

Entropy

Using the results of thermodynamics only, we can go a long way in determining the expression for the entropy of an ideal gas. This is an important step since, according to the theory of thermodynamic potentials, if we can express the entropy as a function of U (U is a thermodynamic potential) and the volume V, then we will have a complete statement of the thermodynamic behavior of the ideal gas. We will be able to derive both the ideal gas law and the expression for internal energy from it.

Since the entropy is an exact differential, using the chain rule, the change in entropy when going from a reference state 0 to some other state with entropy S may be written as ΔS where:

\Delta S = \int_{S_0}^{S}dS
=\int_{T_0}^{T} \left(\frac{\partial S}{\partial T}\right)_V\!dT
+\int_{V_0}^{V} \left(\frac{\partial S}{\partial V}\right)_T\!dV

where the reference variables may be functions of the number of particles N. Using the definition of the heat capacity at constant volume for the first differential and the appropriate Maxwell relation for the second we have:

\Delta S
=\int_{T_0}^{T} \frac{C_v}{T}\,dT+\int_{V_0}^{V}\left(\frac{\partial P}{\partial T}\right)_VdV.

Expressing CV in terms of \hat{c}_V as developed in the above section, differentiating the ideal gas equation of state, and integrating yields:

\Delta S
= \hat{c}_VNk\ln\left(\frac{T}{T_0}\right)+Nk\ln\left(\frac{V}{V_0}\right)
= Nk\ln\left(\frac{VT^{\hat{c}_v}}{f(N)}\right)

where all constants have been incorporated into the logarithm as f(N) which is some function of the particle number N having the same dimensions as VT^{\hat{c}_v} in order that the argument of the logarithm be dimensionless. We now impose the constraint that the entropy be extensive. This will mean that when the extensive parameters (V and N) are multiplied by a constant, the entropy will be multiplied by the same constant. Mathematically:

\Delta S(T,aV,aN)=a\Delta S(T,V,N).\,

From this we find an equation for the function f(N)

af(N)=f(aN).\,

Differentiating this with respect to a, setting a equal to unity, and then solving the differential equation yields f(N):

f(N)=\Phi N\,

where Φ is some constant with the dimensions of VT^{\hat{c}_v}/N. Substituting into the equation for the change in entropy:

\frac{\Delta S}{Nk} = \ln\left(\frac{VT^{\hat{c}_v}}{N\Phi}\right).\,

This is about as far as we can go using thermodynamics alone. Note that the above equation is flawed — as the temperature approaches zero, the entropy approaches negative infinity, in contradiction to the third law of thermodynamics. In the above "ideal" development, there is a critical point, not at absolute zero, at which the argument of the logarithm becomes unity, and the entropy becomes zero. This is unphysical. The above equation is a good approximation only when the argument of the logarithm is much larger than unity — the concept of an ideal gas breaks down at low values of V/N. Nevertheless, there will be a "best" value of the constant in the sense that the predicted entropy is as close as possible to the actual entropy, given the flawed assumption of ideality. It remained for quantum mechanics to introduce a reasonable value for the value of Φ which yields the Sackur-Tetrode equation for the entropy of an ideal gas. It too suffers from a divergent entropy at absolute zero, but is a good approximation to an ideal gas over a large range of densities.

Thermodynamic potentials

Since the dimensionless heat capacity at constant pressure \hat{c}_p is a constant we can express the entropy in what will prove to be a more convenient form:

\frac{S}{kN}=\ln\left( \frac{VT^{\hat{c}_V}}{N\Phi}\right)+\hat{c}_p

where Φ is now the undetermined constant. The chemical potential of the ideal gas is calculated from the corresponding equation of state (see thermodynamic potential):

\mu=\left(\frac{\partial G}{\partial N}\right)_{T,P}

where G is the Gibbs free energy and is equal to U + PVTS so that:

\mu(T,V,N)=-kT\ln\left(\frac{VT^{\hat{c}_V}}{N\Phi}\right).

The thermodynamic potentials for an ideal gas can now be written as functions of T, V, and N as:

U\, =\hat{c}_V NkT\,
A=\, U-TS\, =\mu N-NkT\,
H=\, U+PV\, =\hat{c}_p NkT\,
G=\, U+PV-TS\, =\mu N.\,

The most informative way of writing the potentials is in terms of their natural variables, since each of these equations can be used to derive all of the other thermodynamic variables of the system. In terms of their natural variables, the thermodynamic potentials of a single-species ideal gas are:

U(S,V,N)=\hat{c}_V Nk\left(\frac{N\Phi\,e^{S/Nk-\hat{c}_p}}{V}\right)^{1/\hat{c}_V}
A(T,V,N)=-NkT\left(1+\ln\left(\frac{VT^{\hat{c}_V}}{N\Phi}\right)\right)
H(S,P,N)=\hat{c}_p Nk\left(\frac{p\Phi\,e^{S/Nk-\hat{c}_p}}{k}\right)^{1/\hat{c}_p}
G(T,P,N)=-NkT\ln\left(\frac{kT^{\hat{c}_p}}{P\Phi}\right).

In statistical mechanics, the relationship between the Helmholtz free energy and the partition function is fundamental, and is used to calculate the thermodynamic properties of matters; see configuration integral for more details.

Multicomponent systems

By Gibbs' theorem, the entropy of a multicomponent system is equal to the sum of the entropies of each chemical species (assuming no surface effects). The entropy of a multicomponent system will be

S=\sum_j S_j = \sum_j N_j\,k \left[\ln\left( \frac{VT^{\hat{c}_V}}{N_j\Phi}\right)+\hat{c}_p\right]

where the sum is over all species. Likewise, the free energies are equal to the sums of the free energies of each species so that if Φ is a thermodynamic potential then

\Phi=\sum_j \Phi_j\,

where Φj is expressed in terms of its natural variables. For example, the internal energy will be

U=\sum_j \hat{c}_V N_jk\left(\frac{N_j\Phi\,e^{S_j/N_jk-\hat{c}_p}}{V}\right)^{1/\hat{c}_V}=\hat{c}_V NkT

where N is defined as

N=\sum_j N_j.\,

Ideal gasses are not found in the real world. So they are different from real gasses. There are basic assumptions made in the kinetic theory of gasses.

Speed of sound

The speed of sound in an ideal gas is given by

c_{sound} = \sqrt{\frac{\gamma R T}{M}}

where

\gamma \, is the adiabatic index
R \, is the universal gas constant
T \, is the temperature
M \, is the molar mass of the gas.

Equation Table for an Ideal Gas

See Table of thermodynamic equations#Equation Table for an Ideal Gas.

Ideal quantum gases

In the above mentioned Sackur-Tetrode equation, the best choice of the entropy constant was found to be proportional to the quantum thermal wavelength of a particle, and the point at which the argument of the logarithm becomes zero is roughly equal to the point at which the average distance between particles becomes equal to the thermal wavelength. In fact, quantum theory itself predicts the same thing. Any gas behaves as an ideal gas at high enough temperature and low enough density, but at the point where the Sackur-Tetrode equation begins to break down, the gas will begin to behave as a quantum gas, composed of either bosons or fermions. (See the gas in a box article for a derivation of the ideal quantum gases, including the ideal Boltzmann gas.)

Gases tend to behave as an ideal gas over a wider range of pressures when the temperature reaches the Boyle temperature.

Ideal Boltzmann gas

The ideal Boltzmann gas yields the same results as the classical thermodynamic gas, but makes the following identification for the undetermined constant Φ:

\Phi = \frac{T^{3/2}\Lambda^3}{g}

where Λ is the thermal de Broglie wavelength of the gas and g is the degeneracy of states.

Ideal Bose and Fermi gases

An ideal gas of bosons (e.g. a photon gas) will be governed by Bose-Einstein statistics and the distribution of energy will be in the form of a Bose-Einstein distribution. An ideal gas of fermions will be governed by Fermi-Dirac statistics and the distribution of energy will be in the form of a Fermi-Dirac distribution.

See also

References

  1. ^ a b c Cengel, Yunus A.; Boles, Michael A.. Thermodynamics: An Engineering Approach (Fourth ed.). p. 89. ISBN 0-07-238332-1. 

Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • ideal gas — idealiosios dujos statusas T sritis fizika atitikmenys: angl. ideal gas; perfect gas vok. ideales Gas, n; vollkommenes Gas, n rus. идеальный газ, m; совершенный газ, m pranc. gaz idéal, m; gaz parfait, m …   Fizikos terminų žodynas

  • ideal gas — Physics. a gas composed of molecules on which no forces act except upon collision with one another and with the walls of the container in which the gas is enclosed; a gas that obeys the ideal gas law. Also called perfect gas. [1890 95] * * * …   Universalium

  • ideal gas — idealiosios dujos statusas T sritis Energetika apibrėžtis Dujos, kurių dalelės nesąveikauja. Joms galioja idealiųjų dujų lygtis (Klapeirono lygtis). atitikmenys: angl. ideal gas vok. ideales Gas, n rus. идеальный газ, m pranc. gaz idéal, m …   Aiškinamasis šiluminės ir branduolinės technikos terminų žodynas

  • ideal gas — idealiosios dujos statusas T sritis Standartizacija ir metrologija apibrėžtis Dujos, kurių dalelės nesąveikauja tarpusavyje. atitikmenys: angl. ideal gas; perfect gas vok. ideales Gas, n rus. идеальный газ, m pranc. gaz parfait, m …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

  • ideal gas — idealiosios dujos statusas T sritis chemija apibrėžtis Dujos, kurių molekulės tarpusavyje nesąveikauja. atitikmenys: angl. ideal gas; perfect gas rus. идеальный газ …   Chemijos terminų aiškinamasis žodynas

  • ideal gas — gas made from molecules that do not chemically interact with other substances, perfect gas …   English contemporary dictionary

  • Ideal gas law — The ideal gas law is the equation of state of a hypothetical ideal gas, first stated by Benoît Paul Émile Clapeyron in 1834. : The state of an amount of gas is determined by its pressure, volume, and temperature according to the equation: : PV =… …   Wikipedia

  • ideal gas law — Physics. the law that the product of the pressure and the volume of one gram molecule of an ideal gas is equal to the product of the absolute temperature of the gas and the universal gas constant. Also called gas law. * * * …   Universalium

  • ideal gas law — Physics. the law that the product of the pressure and the volume of one gram molecule of an ideal gas is equal to the product of the absolute temperature of the gas and the universal gas constant. Also called gas law …   Useful english dictionary

  • ideal gas law — the equation of state for an ideal gas: PV = nRT, where P is pressure, V volume, n the number of moles of gas, R the gas constant, and T the absolute temperature. It holds approximately for real gases at low pressures and high temperatures …   Medical dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”