Hazard and operability study

Hazard and operability study

Hazard and operability studies are a methodology for identifying and dealing with potential problems in industrial processes, particularly those which would create a hazardous situation or a severe impairment of the process. It is commonly known as HAZOPKletz, T. A., (1983) "HAZOP & HAZAN Notes on the Identification and Assessment of Hazards" IChemE Rugby] . Some authors call it Hazard and Operability Analysis [e.g. Center for Chemical Process Safety (1992) "Guidelines for Hazard Evaluation Procedures - With Worked Examples" (2nd Edition). AIChE. ISBN 978-0-8169-0491-4] . It is said to be the most widely used method of hazard analysis in the process industries Wells, G., (2004) "Hazard Identification and Risk Assessment", IChemE ISBN 0852954638] , notably the chemical, petrochemical and nuclear industries.It is the subject of an international standardBritish Standard BS: IEC61882:2002 "Hazard and operability studies (HAZOP studies)- Application Guide" British Standards Institution. “This British Standard reproduces verbatim IEC 61882:2001 and implements it as the UK national standard.”] and is listed as a “suitable methodology” in US Federal Regulations [ 29 CFR1910, 29 CFR1926, 40CFR68] .

Method

Outline

The method applies to processes (existing or planned) for which design information is available. This commonly includes a Process flow diagram, which is examined in small sections, such as individual items of equipment or pipes between them. For each of these a design Intention is specified. For example, in a chemical plant, a pipe may have the intention to transport 2.3 kg/s of 96% sulfuric acid at 20°C and a pressure of 2 bar from a pump to a heat exchanger. The intention of the heat exchanger may be to heat 2.3 kg/s of 96% sulfuric acid from 20°C to 80 °C. The Hazop team then determines what are the possible significant Deviations from each intention, feasible Causes and likely Consequences. They then propose possible modifications to the design to remove or reduce the risk of the deviation or reduce the consequences.Usually, the designers consider these suggestions, and produce a modified design, which is subject to a further Hazop. The process may be repeated until it is considered no further modifications are needed.

A Hazop meeting is generally scheduled for 3 hours. For a medium-sized chemical plant where the total number of items to be considered is 1200 (items of equipment and pipes or other transfers between them) about 40 such meetings would be neededSwann, C. D., & Preston, M. L., (1995) "Journal of Loss Prevention in the Process Industries", vol 8, no 6, pp349-353 "Twenty-five years of HAZOPs"] .

Parameters and guide words

The key feature is to select appropriate parameters which apply to the design intention. These are general words such as Flow, Temperature, Pressure, Composition. In the above example, it can be seen that variations in these parameters could constitute Deviations from the design Intention. In order to identify Deviations, the Study Leader applies (systematically, in order) a set of Guide Words to each parameter for each section of the process. The current standard Guide Words are as follows:

In earlier publications it was suggested that the Study Leader could also be the Recorder but separate roles are now generally recommended. A minimum team size of 5 is recommended Nolan, D.P. (1994) "Application of HAZOP and What-If Safety Reviews to the Petroleum, Petrochemical and Chemical Industries". William Andrew Publishing/Noyes. ISBN 978-0-8155-1353-7] . In a large process there will be many Hazop meetings and the team may change as specialists are brought in for different areas, and possibly different members of the design team, but the Study Leader and Recorder will usually be fixed. As many as 20 individuals may be involved but is recommended that no more than 8 are involved at any one time. Software is now available from several suppliers to aid the Study Leader and the Recorder.

History

The technique originated in the Heavy Organic Chemicals Division of ICI, which was then a major British and international chemical company. The history has been described by Trevor KletzKletz, T., (2000) "By Accident - a life preventing them in industry" PVF Publications ISBN 0-9538440-0-5] who was the company's safety advisor from 1968 to 1982, from which the following is abstracted.

In 1963 a team of 3 people met for 3 days a week for 4 months to study the design of a new Phenol plant. They started with a technique called "critical examination" which asked for alternatives, but changed this to look for deviations. The method was further refined within the company, under the name "operability studies", and became the third stage of its hazard analysis procedure (the first two being done at the conceptual and specification stages) when the first detailed design was produced.In 1974 a one-week safety course including this procedure was offered by the Institution of Chemical Engineers (IChemE) at Teesside Polytechnic. Coming shortly after the Flixborough disaster, the course was fully booked, as were ones in the next few years. In the same year the first paper in the open literature was also published [Lawley, H. G.,(1974) "Chemical Engineering Progress", vol 70, no 4 page 45 "Operability studies and hazard analysis" AIChE] . In 1977 the Chemical Industries Association published a guide [Chemical Industries Association (1977) "A Guide to Hazard and Operability Studies"] . Up to this time the term Hazop had not been used in formal publications. The first to do this was Kletz in 1983, with what were essentially the course notes (revised and updated) from the IChemE courses. By this time, hazard and operability studies had become an expected part of chemical engineering degree courses in the UK.

References

Further reading

*cite book|author=Kletz, Trevor|title=Hazop and Hazan|edition=4th Edition|publisher=Taylor & Francis|year=2006|id=ISBN 978052955062
*cite book|author=Tyler, Brian, Crawley, Frank & Preston, Malcolm|title=HAZOP: Guide to Best Practice|edition=2nd Edition|publisher=IChemE, Rugby|year=2008|id=ISBN 9780852955253
* [http://www.hse.gov.uk/research/hsl_pdf/2005/hsl0558.pdf Gould, J., (2000) "Review of Hazard Identification Techniques", HSE]
* [http://www.uscg.mil/hq/g-m/risk/e-guidelines/hazop.htm Summary of Hazop] Explanation by the US Coastguard
* [http://www.lihoutech.com/hzp1frm.htm Hazard and Operability Studies] Explanation by a software supplier

ee also

*Hazard analysis
* Hazard Analysis and Critical Control Points
*Process Safety Management
* Risk assessment
*Safety engineering


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Piping and instrumentation diagram — A piping and instrumentation diagram/drawing (P ID) is a diagram in the process industry which shows the piping of the process flow together with the installed equipment and instrumentation. Contents 1 Contents and Function 2 List of P ID items 3 …   Wikipedia

  • HAZOP — • Hazard and operability (study) …   Maritime acronyms and abbreviations

  • Risk management — For non business risks, see risk, and the disambiguation page risk analysis Example of risk management: A NASA model showing areas at high risk from impact for the International Space Station. Risk management is the identification, assessment,… …   Wikipedia

  • Hazop — 1. noun a) Hazard and Operability Studies, a methodology for identifying harmful deviations in processes, especially in the chemical, petrochemical and nuclear industries. Hazop should be seen as one technique and not as the sole technique. b) A… …   Wiktionary

  • EN 50126 — DIN EN 50126 Bereich Bahnanwendungen Regelt Spezifikation und Nachweis der Zuverlässigkeit, Verfügbarkeit, Instandhaltbarkeit, Sicherheit (RAMS) …   Deutsch Wikipedia

  • Integrated Logistic Support — DIN EN 50126 Bereich Bahnanwendungen Regelt Spezifikation und Nachweis der Zuverlässigkeit, Verfügbarkeit, Instandhaltbarkeit, Sicherheit (RAMS) …   Deutsch Wikipedia

  • RAMS — DIN EN 50126 Bereich Bahnanwendungen Titel Spezifikation und Nachweis der Zuverlässigkeit, Verfügbarkeit, Instandhaltbarkeit, Sicherheit (RAMS) …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”