Fuse (explosives)

Fuse (explosives)

In an explosive, pyrotechnic device or military munition, a fuse (or fuze) is the part of the device that initiates function. In common usage, the word fuse is used indiscriminately. However, when being specific (and in particular in a military context), the term "fuse" describes a simple pyrotechnic detonating device, like the cord on a firecracker, whereas the term "fuze" [http://www.army-technology.com/contractors/ammunition/junghans/] [http://www.fas.org/man/dod-101/navy/docs/fun/part14.htm] [http://www.janes.com/extracts/extract/jmvl/del02063.html] is used to indicate a more sophisticated ignition device incorporating mechanical and/or electronic components e.g. a proximity fuze for an M107 artillery shell, magnetic/acoustic fuze on a sea mine, spring-loaded grenade fuze [ [http://www.freepatentsonline.com/4063514.html Grenade fuze - Patent 4063514] ] [ [http://www.freepatentsonline.com/3618522.html DUAL SAFETY GRENADE FUZE - Patent 3618522] ] [ [http://stinet.dtic.mil/oai/oai?&verb=getRecord&metadataPrefix=html&identifier=ADA312253 Ammunition Peculiar Equipment (APE) 1955 Grenade Fuze Tester MIL-STD-398 Test.] ] , pencil detonator or anti-handling device [http://213.162.22.164/fileadmin/pdf/mbc/IWP/SC_june05/speeches_gs/HRW_17June05.pdf] .

History

The simplest form of fuse is the burning fuse, believed to date back to the 10th century and originating in China, this simple fuse consisted of lightweight paper filled with loose gunpowder, and served as a means of delaying ignition in fireworks. This simple form of burning fuse can still be found today in many modern pyrotechnics. A version of this simple fuse is called visco fuse, and consists of the burning core coated with wax or lacquer for durability and water resistance. The commercial and military version of a burning fuse referred to as safety fuse (invented by William Bickford) is a textile tube filled with combustible material and wrapped to prevent external exposure of the burning core. Safety fuses are used to initiate the detonation of explosives through the use of a blasting cap.

Fuses

Modern day safety fuses are often used in mining and military operations, to provide a time-delay before ignition, and they more often than not are used to initiate an explosive detonator, thereby starting an explosive chain reaction to detonate a larger more stable main charge. Safety fuses are typically colored black (military) or fluorescent orange (commercial) to distinguish them from detonating cords such as Primacord, which are brightly colored or transparent.

Usage

Fuses are found in fireworks, model cannons, antique smoothbore firearms, some improvised explosive devices and many forms of pyrotechnics.

Types

Burning Fuses

* A slow match is a very slow-burning fuse consisting of a hemp or cotton rope saturated with an oxidizer such as potassium nitrate. Slow matches are used as a source of fire for manually lighting other devices, such as matchlock guns, or fuses on black powder cannons. Before percussion caps, slow matches were most suitable for use around black powder weapons because it could be roughly handled without going out, and only presented a small glowing tip instead of a large flame that risked igniting powder supplies nearby.
* Today's punks (wood splints covered with ground plant pith or dung and then saturated with nitrate) used for lighting consumer fireworks are a type of slow match.
* A Black match is a type of fuse consisting of cotton string coated with a dried slurry of black powder and glue. This acts as a simple pass-fire, and was used to fire ancient cannons. They are used today in fireworks construction.
* A quick match or piped match is a type of black powder fuse that burns very quickly, some hundreds of feet per second. They consist of black matche covered with a loose paper wrap (pipe). When lit, the flame propagates quickly down the paper pipe from the hot gases produced by the burning powder. Quick matches are used in professional fireworks displays to pass fire nearly instantly between devices that must be physically separated while firing simultaneously, such as a finale rack. Devices which should fire in sequence can be branched from a single master fuse, consisting of quick match spliced onto Visco fuses of various length for time delays.
* A visco fuse has a core of black powder with one or more textile overwraps, The outer layers may be coated with wax or nitrocellulose lacquer for water resistance. These fuses are widely used in modern pyrotechnics because they burn at a uniform rate, with an easily visible external flame. Depending on their outer treatment, visco fuses are water resistant and the better quality can burn reliably underwater once lit, since the black powder core provides both its own fuel and oxidant.
* A safety fuse consists of a black powder core in a textile tube, covered with asphaltum or other waterproofing agent, and having an outer wrapper of tough textile or plastic. They are made in a standard diameter designed to be crimped into blasting caps. ["DuPont Blaster's Handbook, Fifteenth Edition", Wilmington, Delaware, E.I. DuPont de Nemours and Company, Inc., 1969, pp 97-99] Once ignited, safety fuses will burn underwater, and have no external flame that might ignite methane or other fuels such as might be found in mines or other industrial environments. Safety fuses are manufactured with specified burn times per 30 cm, e.g. 60 seconds, which means that a length of fuse 30 cm long will take 60 seconds to burn. Manufacturers warn that although every effort is made to insure uniform burn times, safety fuses are subject to variation depending on conditions and should be used with adequate safety margins.
* An Igniter Safety Fuse Electric (ISFE) lights a main fuse or device when activated by an electrical current. They typically consist of a pair of wires leading to a thin resistance wire that heats when current is applied. The resistance wire is covered by a bit of pyrotechnic composition that ignites from the wire heating, providing enough fire to reliably ignite the main fuse via a mechanical connection, or the device directly. Estes model rocket motors are lit by a type of electric match. Large fireworks displays are launched with complex timing sequences using a computer that energizes electric matches connected to the individual device fuses.
* A flying fish fuse (bumblebees) is an unusual type of component for fireworks. It is made like Visco fuse, but contains a metallic spark composition or other effect instead of black powder. Flying fish can thus perform as a main effect instead of just an initiator. For example, simply lighting a short piece of flying fish on the ground makes it fly through the air, seeming to swim in random directions, while emitting sparks and noise. A aerial shell loaded with many such pieces results in a beautiful myriad of pieces flying and sparking high in the air.
* A spoolette is a delay fuse consisting of a hollow wooden dowel rammed full of black powder. A spoolette is glued into the wall of a fireworks shell and ignited by the lift charge that launches the shell into the air. The spoolette, after a delay that allows the shell to reach its top of trajectory, ignites the shell's main effect(s). The tough wood construction ensures that the fuse burns reliably despite the explosive force and acceleration of the launch.
* The saucisson was an early form of fuse.

Munition fuzes

As can be seen from the various accompanying diagrams, most countries use the 'z' spelling [http://www.dtic.mil/ndia/2004fuze/minnich.pdf] [http://www.dtic.mil/ndia/2003fuze/pergolizzi.pdf] [http://www.dtic.mil/ndia/2001fuze/2Duong.pdf] [http://www.ordnance.org/fuzes.htm] [http://www.globalsecurity.org/military/systems/munitions/fuzes.htm] [http://stinet.dtic.mil/oai/oai?verb=getRecord&metadataPrefix=html&identifier=AD0869176] to distinguish between simple burning fuses and more complicated munition fuzes, which contain mechanical and/or electronic components. The relative complexity of even the most early fuze designs (dating from circa 1915) can be seen in the cut-away diagrams at the end of this article. Modern fuzes for "smart weapons" are invariably computerised i.e. incorporate microprocessors such as gate arrays.

A fuze refers to a device used in munitions which is designed to detonate, or to set forces into action to ignite, detonate or deflagrate, the charge (or primer) under specified conditions. In contrast to a simple pyrotechnic fuse, a munitions fuze always has some form of safety/arming mechanism, designed to protect the user from premature or accidental detonation [http://www.dtic.mil/ndia/2004fuze/hiebel.pdf] .

Types

Types of fuzes include:
* time fuzes detonate after a set period of time by using one or more combinations of mechanical, electronic, pyrotechnic or even chemical timers. Depending on the technology used, the device may self-destruct [http://www.dtic.mil/ndia/2003fuze/strickland.pdf] (or render itself safe without detonation [http://www.defensetech.org/archives/002534.html] ) some seconds, minutes, hours, days, or even months after being deployed.
* contact detonators or point detonating fuzes detonate immediately on impact with the target.
* proximity fuzes cause a missile warhead or other munition (e.g. air-dropped bomb or sea mine) to detonate when it comes within a certain pre-set distance of the target, or vice versa. Proximity fuzes utilize sensors incorporating one or more combinations of the following: radar, active sonar, passive acoustic, infrared, magnetic, photoelectric, seismic or even television cameras. These may take the form of an anti-handling device designed specifically to kill or severely injure anyone who tampers with the munition in some way e.g. lifting or tilting it. Regardless of the sensor used, the pre-set triggering distance is calculated such that the explosion will occur sufficiently close to the target that it is either destroyed or severely damaged.
* remote detonators use wires or radio waves to remotely command the device to detonate.
* barometric fuzes cause a bomb to detonate at a certain pre-set altitude above sea level by means of an radar, barometric altimeter or and infrared rangefinder.

Combinations are common, e.g. the RPG-7 has usually an impact (PIBD) fuze and a 4.5 second time fuze; detonation occurs on impact, but not later than after 4.5 seconds.

Fuze Safety/Arming Mechanisms

Military weapons containing explosives have fuzing systems to ensure that they do not initiate (explode) prematurely. In general, the munition has to travel a certain distance, wait for a period of time (via clockwork, electronic or even a chemical delay), or have some form of arming pin/plug removed. Only when these processes have occurred will the arming process be complete. The multiple safety/arming features in the M734 mortar fuze are representative of the sophistication of modern electronic fuzes.

Safety/Arming mechanisms can be as simple as the spring-loaded safety levers on M67 or RGD-5 grenade fuzes, which will not initiate the explosive train so long as the pin is kept in the grenade, or the safety lever is held down on a pinless grenade. Alternatively, it can be as complex as the electronic timer-countdown on an influence sea mine, which gives the vessel laying it sufficient time to move out of the blast zone before the magnetic or acoustic sensors are fully activated.

In modern artillery shells, most fuzes incorporate several safety features to prevent a fuze arming before it leaves the gun barrel. These safety features may include arming on "setback" or by centrifugal force, and often both operating together. Set-back arming uses the inertia of the accelerating artillery shell to remove a safety feature as the projectile accelerates from rest to its in-flight speed. Rotational arming requires that the artillery shell reach a certain rpm before centrifugal forces cause a safety feature to disengage or move an arming mechanism to its armed position. Artillery shells are fired through a rifled barrel, which forces them to spin during flight.

In other cases the bomb, mine or projectile has a fuze that prevents accidental initiation e.g. stopping the rotation of a small propellor (unless a lanyard pulls out a pin) so that the striker-pin cannot hit the detonator even if the weapon is dropped on the ground. These types of fuze operate with aircraft weapons, where the weapon may have to be jettisoned over "friendly" territory to allow a damaged aircraft to continue to fly. The crew can choose to jettison the weapons "safe" by dropping the devices with safety pins still attached, or drop them "live" by retaining the safety pins as the weapons leave the aircraft.

Aerial bombs and depth charges can be "nose" and "tail" fuzed using different detonator/initiator characteristics so that the crew can choose which effect fuze will suit target conditions that may not have been known before the flight. The arming switch is set to one of "safe", "nose", or "tail" at the crew's choice.

Base fuzes are also used by artillery and tanks for shells of the 'squash head' type. Some types of armour piercing shells have also used base fuzes, as have nuclear artillery shells.

The most sophisticated fuze mechanisms of all are those fitted to nuclear weapons, and their safety/arming devices are correspondingly complex. In addition to PAL protection, the fuzing used in nuclear weapons features multiple, highly sophisticated environmental sensors e.g. sensors requiring highly specific acceleration and deceleration profiles before the warhead can be fully armed. The intensity and duration of the acceleration/deceleration must match the environmental conditions which the bomb/missile warhead would actually experience when dropped or fired. Furthermore, these events must occur in the correct order.

Note: some fuzes, e.g. those used in air-dropped bombs and landmines may contain anti-handling devices specifically designed to kill bomb disposal personnel. The technology to incorporate booby-trap mechanisms in fuzes has existed since at least 1940 e.g. the German ZUS40 anti-removal bomb fuze [http://www.bocn.co.uk/vbforum/zus-40-anti-t4053.html?s=10c72e0dc5c219f648dadbd6b7ab792c&] .

ee also

* Percussion cap
* Artillery fuzes
* Proximity fuze
* Anti-handling device
* Thermalite

References

External links

* [http://www.lexpev.nl/downloads/bombfuzedata1945.pdf Bomb fuze data - US guide dated 1945]
* [http://www.globalsecurity.org/wmd/intro/safe.htm Safing, Arming, Fuzing, and Firing (SAFF) info from Globalsecurity.org]
* [http://www.ordnance.org/fuzes.htm Tutorial regarding fuzes for air-dropped bombs]
* [http://web.ukonline.co.uk/stephen.johnson/arms/fusb1.jpgInternal view of 1940s aerial bomb fuze, featuring 2 strikers held back by single screw-thread and 2 creep springs]
* [http://www.90thidpg.us/Equipment/Weapons/index.html 90th Infantry Division Preservation Group] - page on 81mm Mortar Fuzes

Gallery of Fuzes


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Fuse — NOTOC The word fuse has several meanings: * Fuse (electrical), a device used in electrical systems to protect against excessive current. * Fuse (hydraulic), a device used in hydraulic systems to protect against sudden loss of fluid pressure *… …   Wikipedia

  • Explosives safety — originated as a formal program in the US in the aftermath of World War I when several ammunition storage areas were destroyed in a series of mishaps. The most serious occurred at Lake Denmark Naval Ammunition Storage Depot, New Jersey, in July,… …   Wikipedia

  • fuse — fuse1 fuseless, adj. fuselike, adj. /fyoohz/, n., v., fused, fusing. n. 1. a tube, cord, or the like, filled or saturated with combustible matter, for igniting an explosive. 2. fuze (def. 1). 3. have a short fuse, Informal. to anger easily; have… …   Universalium

  • Visco fuse — A visco fuse is a higher quality fuse used for consumer fireworks. It is most commonly colored green or red, and is found as a twisted, coated strand. It is also used to create delays in the firing of multiple firework displays. Description Visco …   Wikipedia

  • safety fuse — /ˈseɪfti fjuz/ (say sayftee fyoohz) noun 1. a fuse in an electrical circuit which prevents overloading which might cause damage or fire in the circuit. 2. a fuse for igniting explosives which burns slowly, allowing those who have lit it to move… …  

  • Detonator — For other uses, see Detonator (disambiguation). top: small nonel detonator with 25ms delay for chaining nonel tubes, middle: class B SPD detonator, bottom: class C SPD detonator …   Wikipedia

  • Ammunition — This article is about ammunition for firearms and artillery. For the product design company, see Ammunition Design Group. A belt of 0.50 caliber ammunition loaded to a …   Wikipedia

  • Bomb disposal — Bomb squad redirects here. For the Suburban Legends EP, see Bomb Squad EP. For the hip hop producers, see The Bomb Squad. The long walk :[1] A British Army ATO approaches a suspect device in Northern Ireland …   Wikipedia

  • Unexploded ordnance — UXO redirects here. For the canceled video game, see Ultima X: Odyssey. British and Belgian officers stand beside an unexploded German shell in Flanders, during the First World War. Unexploded ordnance (or UXOs/UXBs, sometimes acronymized as UO)… …   Wikipedia

  • Black match — In pyrotechnics, black match is a type of crude fuse, constructed of cotton string fibers intimately coated with a dried black powder slurry.When black match is confined in a paper tube, called quick match or piped match, the flame front… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”