Muzzle booster

Muzzle booster

A muzzle booster or recoil booster is a device affixed to the muzzle of a firearm, intended to harness the energy of the escaping propellant to augment the force of recoil on portions of the firearm. Muzzle boosters are usually used to improve the reliability of a recoil operated firearm. The muzzle booster is the antithesis of the muzzle brake, which is designed to use the propellant gases to reduce the recoil of the firearm.

Contents

History

The recoil booster was first introduced in the Vickers machine gun of 1912. The Vickers, like the Maxim gun from which it was developed, uses a short recoil action. At firing the recoil from the cartridge pushes the barrel backwards within the gun. This movement provides the energy required to extract and eject the spent cartridge, and compresses the recoil spring to complete the cycle. The muzzle booster increased the recoil transmitted to the barrel by directing some of the escaping gas into pushing the barrel back rather than letting it all expand outwards at the muzzle. This increased the initial velocity of the barrel and lock, providing more energy for the operation of the mechanism.

Construction

Animation of the Vickers muzzle booster operation, showing the expanding gases pushing the barrel to the rear relative to the cooling jacket

The booster on the Vickers consists of two parts; the first is a flared "cup" on the muzzle of the barrel and the second is a perforated tube around the end of the muzzle. As the bullet exits the barrel, it passes through the close tolerance hole in the end of the perforated tube. As it does so it temporarily forms a blockage to further forward movement of the expanding gas from the barrel. The pressure inside the booster rises, as the gases are forced to reverse direction to escape the booster. The cup on the muzzle of the barrel provides a large surface for the gas to push against, and the increased pressure accelerates the barrel to the rear. The resulting action can be seen as a composite of the recoil action and a gas action — the barrel being acted upon as if it were the piston.

Historical applications

The original use of the recoil booster was to provide additional energy to move the large barrel mass on recoil operated machine guns. The much later German MG42 was another such machine gun which also made use of a muzzle booster. This application has largely fallen out of use as modern machine gun design switched to delayed blowback and gas operation in many cases. The Rheinmetall MG3, essentially an MG42 modified to use the standard 7.62×51mm NATO round, and currently used by the German military, still uses a boosted short recoil design.

Drawings from US patent 4,128,040, for a blank firing adapter for the short recoil operated M2 Browning machine gun

Modern applications

Recoil boosters have found a new use in suppressors on Browning-pattern recoil operated pistols (i.e., most modern centerfire pistols). Such pistols have a barrel which recoils a short distance upon firing before unlocking from the slide. Adding the mass of a suppressor to a recoil operated pistol significantly adds to the recoiling mass, and the extra inertia of the suppressor can slow or even stop the recoil action of the barrel. By incorporating a recoil booster, often called a Nielsen device, the weight of the suppressor can be uncoupled from the barrel, allowing the pistol to function properly by boosting the recoil energy of the barrel and slide. Many suppressor boosters incorporate an indexing system which allows the suppressor to be re-oriented in a number of different rotational positions, allowing the end user to fine-tune the weapon's point of aim.

Some blank firing adapters (BFAs) act as recoil boosters, harnessing the gases produced by the blank cartridge to compensate for the lack of recoil from the bullet.


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Muzzle flash — of an Israeli Merkava IIId Baz tank IMI 120 mm gun …   Wikipedia

  • Muzzle brake — The muzzle brake of the 105 mm gun on an AMX 10 RC fighting vehicle …   Wikipedia

  • Blank-firing adaptor — A blank firing adaptor or blank firing attachment (BFA), sometimes called a blank adaptor or blank attachment, is a device used in conjunction with blank ammunition. Blank firing adapters are required for allowing blanks to cycle most automatic… …   Wikipedia

  • Gas-operated reloading — Gas operation is a system of operation used to provide energy to operate autoloading firearms. In gas operation, a portion of high pressure gas from the cartridge being fired is used to power a mechanism to extract the spent case and chamber a… …   Wikipedia

  • MG 08 — 08/15 redirects here. For the 1950s West German film trilogy, see 08/15 (film). Maschinengewehr 08 MG 08 on a sledge mount Type …   Wikipedia

  • Recoil operation — is an operating mechanism used in locked breech, autoloading firearms. As the name implies, these actions use the force of recoil to provide energy to cycle the action. Other operating systems are blowback operated, gas operated, gatling, and… …   Wikipedia

  • M1919 Browning machine gun — Gun, Machine, Caliber .30, Browning, M1919A4 Type Medium machine gun Place of origin  United States …   Wikipedia

  • Maxim M/32-33 — 7,62 mm Maxim M/32 33 Type Machine gun Place of origin …   Wikipedia

  • Vickers machine gun — Infobox Weapon name= Vickers Medium Machine Gun caption= Vickers MMG and crew origin=flagcountry|United Kingdom type= Medium machine gun is ranged=yes is UK=yes service= 1912–1968 used by= See Users wars= World War I, World War II, Korean War… …   Wikipedia

  • Breda Model 35 — Infobox Weapon name=Cannone Mitragliera da 20/65 modello 35 caption=A 20/65 Breda anti aircraft gun in Beijing. This example does not have the predictor sight mounted or the muzzle booster fitted on many other examples. origin= type=Light anti… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”