Connectionless mode transmission

Connectionless mode transmission

In a packet-switched network, connectionless mode transmission is a transmission in which each packet is prepended with a header containing a destination address sufficient to permit the independent delivery of the packet without the aid of additional instructions.

A packet transmitted in a connectionless mode is frequently called a datagram.

In connection-oriented communication the stations about to exchange data first need to declare towards each other that they want to do so. This is called "establishing a connection". A connection is sometimes defined as a logical relationship between the peers exchanging data.

An advantage of connectionless mode over connection-oriented mode is that it has a low data overhead. It also allows for multicast and broadcast operations, which may save even more network resources when the same data needs to be transmitted to several recipients. In contrast, a connection is always unicast (point-to-point).

Unfortunately, in connectionless mode transmission of a packet, the service provider usually cannot guarantee that there will be no loss, error insertion, misdelivery, duplication, or out-of-sequence delivery of the packet. (However, the risk of these hazards may be reduced by providing a reliable transmission service at a higher protocol layer of the OSI Reference Model.)

Another drawback of the connectionless mode is that no optimisations are possible when sending several frames between the same two peers. By establishing a connection at the beginning of such a data exchange the components (routers, bridges) along the network path would be able to pre-compute (and hence cache) routing-related information, avoiding re-computation for every packet. Network components could also reserve capacity for the transfer of the subsequent frames of e.g. a video download.

The distinction between connectionless and connection-oriented transmission may take place at several layers of the OSI Reference Model:
* At the transport layer: TCP is a connection-oriented transport protocol. UDP is connectionless.
* At the network layer.
* At the data link layer: The IEEE 802.2 protocol at the Logical Link Control sublayer of the data link layer may provide both connectionless and connection-oriented services. In fact, some network protocols (such as SNA's Path Control in its early stages) require a connection-oriented data link layer. Others (like IP) do not. (After the appearance of APPN, SNA could operate on a connectionless Data Link Service as well.)

References

* Federal Standard 1037C


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Connectionless communication — In packet switching networks, CL mode[1] or connectionless communication is a data transmission method in which each data packet carries information in a header record that contains a destination address sufficient to permit the independent… …   Wikipedia

  • Connection-oriented — In telecommunications, connection oriented describes a means of transmitting data in which the devices at the end points use a preliminary protocol to establish an end to end connection before any data is sent, and in which data is sent over the… …   Wikipedia

  • TCP/IP model — See also: Internet Protocol Suite The TCP/IP model (Transmission Control Protocol/Internet Protocol) is a descriptive framework for the Internet Protocol Suite of computer network protocols created in the 1970s by DARPA, an agency of the United… …   Wikipedia

  • Data link layer — The OSI model 7 Application layer 6 Presentation layer 5 Session layer 4 Transport layer 3 Network layer 2 …   Wikipedia

  • DO-212 — Minimum Operational Performance Standards for Airborne Automatic Dependent Surveillance (ADS) Equipment Latest Revision October 26, 1992 Prepared by RTCA SC 170 DO 212 is a performance standard published by RTCA, Incorporated. It contains Minimum …   Wikipedia

  • Burst switching — In a packet switched network, burst switching is a capability in which each network switch extracts routing instructions from an incoming packet header to establish and maintain the appropriate switch connection for the duration of the packet,… …   Wikipedia

  • Connection — Connect, connection, connections, connected, or connectivity may refer to: Contents 1 Mathematics 2 Technology 3 Media …   Wikipedia

  • 300-page iPhone bill — A 300 page iPhone bill from AT T Mobility mailed in a box [cite web | url = http://www.washingtonpost.com/wp dyn/content/article/2007/09/05/AR2007090500370.html | title = Sexy Portable Storage : The 300 Page iPhone Bill | quote = Justine Ezarik,… …   Wikipedia

  • Communications protocol — For other senses of this word, see Protocol. A communications protocol is a system of digital message formats and rules for exchanging those messages in or between computing systems and in telecommunications. A protocol may have a formal… …   Wikipedia

  • OSI protocols — The OSI model 7 Application layer 6 Presentation layer 5 Session layer 4 Transport layer 3 Network layer 2 …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”