Integral transform

Integral transform

In mathematics, an integral transform is any transform "T" of the following form:

: (Tf)(u) = int_{t_1}^{t_2} K(t, u), f(t), dt.

The input of this transform is a function "f", and the output is another function "Tf". An integral transform is a particular kind of mathematical operator.

There are numerous useful integral transforms. Each is specified by a choice of the function "K" of two variables, the kernel function or nucleus of the transform.

Some kernels have an associated "inverse kernel" K^{-1}( u,t ) which (roughly speaking) yields an inverse transform:

: f(t) = int_{u_1}^{u_2} K^{-1}( u,t ), (Tf)(u), du.

A "symmetric kernel" is one that is unchanged when the two variables are permuted.

Motivation

Mathematical notation aside, the motivation behind integral transforms is easy to understand. There are many classes of problems that are difficult to solve—or at least quite unwieldy algebraically—in their original representations. An integral transform "maps" an equation from its original "domain" ("e.g.", functions where time is the independent variable are said to be in the time domain) into another domain. Manipulating and solving the equation in the target domain is, ideally, much easier than manipulation and solution in the original domain. The solution is then mapped back to the original domain with the inverse of the integral transform.

Integral transforms work because they are based upon the concept of "spectral factorization" over orthonormal bases. What this means is that many important arbitrarily complicated functions can be represented as sums of much simpler functions.

History

The precursor of the transforms were the Fourier series to express functions in finite intervals. Later the Fourier transform was developed to remove the requirement of finite intervals.

Using the Fourier series, just about any practical function of time (the voltage across the terminals of an electronic device for example) can be represented as a sum of sines and cosines, each suitably scaled (multiplied by a constant factor) and shifted (advanced or retarded in time). The sines and cosines in the Fourier series are an example of an orthonormal basis.

Importance of orthogonality

The individual basis functions have to be orthogonal. That is, the product of two dissimilar basis functions—integrated over their domain—must be zero. An integral transform, in actuality, just changes the representation of a function from one orthogonal basis to another. Each point in the representation of the transformed function in the target domain corresponds to the contribution of a given orthogonal basis function to the expansion. The process of expanding a function from its "standard" representation to a sum of a number of orthonormal basis functions, suitably scaled and shifted, is termed "spectral factorization." This is similar in concept to the description of a point in space in terms of three discrete components, namely, its "x", "y", and "z" coordinates. Each axis correlates only to itself and nothing to the other orthogonal axes. Note the terminological consistency: the determination of the amount by which an individual orthonormal basis function must be scaled in the spectral factorization of a function, "F", is termed the "projection" of "F" onto that basis function.

The normal Cartesian graph "per se" of a function can be thought of as an orthonormal expansion. Indeed, each point just reflects the contribution of a given orthonormal basis function to the sum. Intuitively, the point (3,5) on the graph means that the orthonormal basis function δ(x-3), where "δ" is the Dirac delta function, is scaled up by a factor of five to contribute to the sum in this form. In this way, the graph of a continuous real-valued function in the plane corresponds to an "infinite" set of basis functions; if the number of basis functions were finite, the curve would consist of a discrete set of points rather than a continuous contour.

Usage example

As an example of an application of integral transforms, consider the Laplace transform. This is a technique that maps differential or integro-differential equations in the "time" domain into polynomial equations in what is termed the "complex frequency" domain. (Complex frequency is similar to actual, physical frequency but rather more general. Specifically, the imaginary component "ω" of the complex frequency "s = -σ + iω" corresponds to the usual concept of frequency, "viz.", the speed at which a sinusoid cycles, whereas the real component "σ" of the complex frequency corresponds to the degree of "damping". ) The equation cast in terms of complex frequency is readily solved in the complex frequency domain (roots of the polynomial equations in the complex frequency domain correspond to eigenvalues in the time domain), leading to a "solution" formulated in the frequency domain. Employing the inverse transform, "i.e.", the inverse procedure of the original Laplace transform, one obtains a time-domain solution. In this example, polynomials in the complex frequency domain (typically occurring in the denominator) correspond to power series in the time domain, while axial shifts in the complex frequency domain correspond to damping by decaying exponentials in the time domain.

The Laplace transform finds wide application in physics and particularly in electrical engineering, where the characteristic equations that describe the behavior of an electric circuit in the complex frequency domain correspond to linear combinations of exponentially damped, scaled, and time-shifted sinusoids in the time domain. Other integral transforms find special applicability within other scientific and mathematical disciplines.

Table of transforms

In the limits of integration for the inverse transform, "c" is a constant which depends on the nature of the transform function. For example, for the one and two-sided Laplace transform, "c" must be greater than the largest real part of the zeroes of the transform function.

General theory

Although the properties of integral transforms vary widely, they have some properties in common. For example, every integral transform is a linear operator, since the integral is a linear operator, and in fact if the kernel is allowed to be a generalized function then all linear operators are integral transforms (a properly formulated version of this statement is the Schwartz kernel theorem).

The general theory of such integral equations is known as Fredholm theory. In this theory, the kernel is understood to be a compact operator acting on a Banach space of functions. Depending on the situation, the kernel is then variously referred to as the Fredholm operator, the nuclear operator or the Fredholm kernel.

See also

* Convolution kernel
* List of transforms
* List of operators
* List of Fourier-related transforms
* Kernel trick
* Kernel methods
* Nachbin's theorem

References

* A. D. Polyanin and A. V. Manzhirov, "Handbook of Integral Equations", CRC Press, Boca Raton, 1998. ISBN 0-8493-2876-4
* [http://eqworld.ipmnet.ru/en/auxiliary/aux-inttrans.htm Tables of Integral Transforms] at EqWorld: The World of Mathematical Equations.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • integral transform — In mathematics, a function that results when a given function is multiplied by a so called kernel function, and the product is integrated (see integration) between suitable limits. Its value lies in its ability to simplify intractable… …   Universalium

  • Integral geometry — In mathematics, the term integral geometry is used in two ways, which, although related, imply different views of the content of the subject. Cases The more traditional usage is that of Santalo and Blaschke. It follows from the classic theorem of …   Wikipedia

  • integral — integrality, n. integrally, adv. /in ti greuhl, in teg reuhl/, adj. 1. of, pertaining to, or belonging as a part of the whole; constituent or component: integral parts. 2. necessary to the completeness of the whole: This point is integral to his… …   Universalium

  • transform — transformable, adj. transformative, adj. v. /trans fawrm /; n. /trans fawrm/, v.t. 1. to change in form, appearance, or structure; metamorphose. 2. to change in condition, nature, or character; convert. 3. to change into another substance;… …   Universalium

  • Integral yoga — Yogaschool|name=Integral yoga color=green bgcolor=white religious origins=Hinduism, Vedanta regional origins=Sri Aurobindo Ashram, India founding guru=Sri Aurobindo, The Mother popularity= millions, both in India and abroad practice… …   Wikipedia

  • Integral — This article is about the concept of integrals in calculus. For the set of numbers, see integer. For other uses, see Integral (disambiguation). A definite integral of a function can be represented as the signed area of the region bounded by its… …   Wikipedia

  • Laplace transform — In mathematics, the Laplace transform is one of the best known and most widely used integral transforms. It is commonly used to produce an easily soluble algebraic equation from an ordinary differential equation. It has many important… …   Wikipedia

  • Fourier transform — Fourier transforms Continuous Fourier transform Fourier series Discrete Fourier transform Discrete time Fourier transform Related transforms The Fourier transform is a mathematical operation that decomposes a function into its constituent… …   Wikipedia

  • Mellin transform — In mathematics, the Mellin transform is an integral transform that may be regarded as the multiplicative version of the two sided Laplace transform. This integral transform is closely connected to the theory of Dirichlet series, and is often used …   Wikipedia

  • Weierstrass transform — In mathematics, the Weierstrass transform [Ahmed I. Zayed, Handbook of Function and Generalized Function Transformations , Chapter 18. CRC Press, 1996.] of a function f : R rarr; R is the function F defined by:F(x)=frac{1}{sqrt{4piint {… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”