Organic superconductor

Organic superconductor

In physical chemistry and condensed matter physics, an organic superconductor is an organic compound which exhibits superconductivity at low temperatures. As of 2007 the highest achieved critical temperature for an organic superconductor at ambient pressure is 33 kelvin, observed in the alkali-doped fullerene RbCs2C60[1][2].

There are a large number of materials that can be described as organic superconductors. These include the Bechgaard salts and Fabre salts which are both quasi one-dimensional, and quasi two-dimensional materials such as k-BEDT-TTF2X charge transfer salts, λ-BETS2X compounds, graphite intercalation compounds and three dimensional materials such as the alkali-doped fullerenes.

In 1979 Klaus Bechgaard synthesized the first organic superconductor (TMTSF)2PF6 (the corresponding material class was named after him later) with a transition temperature of TC = 1.1 K (at an external pressure of 6.5 kbar).

Organic superconductors are of special interest not only for scientists, looking for room-temperature superconductivity and for model systems explaining the origin of superconductivity but also for daily life issues as organic compounds are mainly built of carbon and hydrogen which belong to the most common elements on earth in contrast to copper or silicon.

Contents

One dimensional Fabre- & Bechgaard-Salts

Fabre-Salts are composed of tetramethyltetrathiafulvalene (TMTTF) and Bechgaard-salts of tetramethyltetraselenafulvalene (TMTSF). This two organic molecules are similar expect for the sulfur-atoms of TMTTF being replaced by selenium-atoms in TMTSF. The molecules are stacked in columns (with a tendency to dimerization) which are separated by anions. Typical anions are for example octahedral PF6, AsF6 or tetrahedral ClO4 or ReO4.

Both material classes are quasi one-dimensional at room-temperature only conducting along the molecule stacks and share a very rich phase diagram containing antiferromagnetic ordering, charge order, spin-density wave state, dimensional crossover and of course superconductivity.

Only one Bechgaard-Salt was found to be superconducting at ambient pressure which is (TMTTF)2ClO4 with a transition temperature of TC = 1.4 K. Several other salts become superconducting only under external pressure. The external pressure one would have to apply to drive most Fabre-salts to superconductivity is so high, that under lab conditions superconductivity was observed only in one compound. A selection of the transition temperature and corresponding external pressure of several one-dimensional organic superconductors is shown in the table below.

Material TC (K) pext (kbar)
(TMTSF)2SbF6 0.36 10.5
(TMTSF)2PF4 1.1 6.5
(TMTSF)2AsF6 1.1 9.5
(TMTSF)2ReO4 1.2 9.5
(TMTSF)2TaF6 1.35 11
(TMTTF)2Br 0.8 26

Two-dimensional (BEDT-TTF)2X

BEDT-TTF is the short form of bisethylenedithio-tetrathiafulvalene commonly abbreviated with ET. These molecules form planes which are separated by anions. The pattern of the molecules in the planes is not unique but there are several different phases growing, depending on the anion and the growth conditions. Important phases concerning superconductivity are the α- and θ- phase with the molecules ordering in a fishbone structure and the β- and especially κ-phase which order in a checkerboard structure with molecules being dimerized in the κ-phase. This dimerization makes the κ-phases special as they are not quarter- but half-filled systems, driving them into superconductivity at higher temperatures compared to the other phases.

The amount of possible anions separating two sheets of ET-molecules is nearly infinite. There are simple anions such as I3, polymeric ones such as the very famous Cu[N(CN)2]Br and anions containing solvents for example Ag(CF3)4·112DCBE. The electronic properties of the ET-based crystals are determined by its growing phase, its anion and by the external pressure applied. The external pressure needed to drive an ET-salt with insulating groundstate to a superconducting one is much smaller than those needed for Bechgaard-Salts. For example κ-(ET)2Cu[N(CN)2]Cl needs only a pressure of about 300 bar to become superconducting, which can be achieved by placing a crystal in grease which is freezing below 0 °C and then providing sufficient stress to induce the superconducting transition. The crystals are very sensitive (never user tweezers on them) which can be observed impressively in α-(ET)2I3 lying several hours in the sun (or, more controlled in an oven at 40 °C). After this treatment one gets αTempered-(ET)2I3 which is superconducting.

In contrast to the Fabre-/Bechgaard-Salts universal phase diagrams for all the ET-based salts have only been proposed yet. For sure such a phase diagram wouldn’t only depend on temperature and pressure (i.e. bandwidth) but also on electronic correlations. In addition to the superconducting groundstate these materials show charge-order, antiferromagnetism or remain metallic down to lowest temperatures. One compound is even predicted to be a spin liquid.

The highest transition temperatures at ambient pressure and with external pressure are both found in κ-phases with very similar anions. κ-(ET)2Cu[N(CN)2]Br becomes superconducting at TC = 11.8 K at ambient pressure, and a pressure of 300 bar drives deuterated κ-(ET)2Cu[N(CN)2]Cl from an antiferromagnetic to a superconducting groundstate with a transition temperature of TC = 13.1 K. The following table restricts to only a few exemplary superconductors of this class. For more superconductors see ref 1.

Material TC (K) pext (kbar)
βH-(ET)2I3 1.5 0
θ-(ET)2I3 3.6 0
k-(ET)2I3 3.6 0
α-(ET)2KHg(SCN)4 0.3 0
α-(ET)2KHg(SCN)4 1.2 1.2
β’’-(ET)2SF5CH2CF2SO3 5.3 0
κ-(ET)2Cu[N(CN)2]Cl 12.8 0.3
κ-(ET)2Cu[N(CN)2]Cl deuterated 13.1 0.3
κ-(ET)2Cu[N(CN)2]Br deuterated 11.2 0
κ-(ET)2Cu(NCS)2 10.4 0
κ-(ET)4Hg2.89Cl8 1.8 12
κH-(ET)2Cu(CF3)4·TCE 9.2 0
κH-(ET)2Ag(CF3)4·TCE 11.1 0

Even more superconductors can be found by changing the ET-molecules slightly either by replacing the sulfur atoms by selenium (BEDT-TSF, BETS) or by oxygen (BEDO-TTF, BEDO).

Some two-dimensional organic superconductors of the κ-(ET)2X and λ(BETS)2X families are candidates for the Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) phase when superconductivity is suppressed by an external magnetic field.[3]

Doped Buckminster fullerenes

Superconducting fullerenes (based on the Buckminster fullerene C60) are fairly different from other organic superconductors. The building molecules are no longer manipulated hydrocarbons but pure carbon molecules. In addition these molecules are no longer flat but bulky which gives rise to a three dimensional, isotropic superconductor. The pure C60 grows in a fcc-lattice and is an insulator. By placing alkali atoms in the interstitials the crystal becomes metallic and eventually superconducting at low temperatures.

Unfortunately C60 crystals are not stable at ambient atmosphere. They are grown and investigated in closed capsules, limiting the measurement techniques possible. The highest transition temperature measured so far was TC = 33 K for Cs2RbC60.The highest measured transition temperature of an organic superconductor was found in 1995 in Cs3C60 pressurized with 15 kbar to be TC = 40 K. Under pressure this compound shows a unique behaviour. Usually the highest TC is achieved with the lowest pressure necessary to drive the transition. Further increase of the pressure reduces the transition temperature usually. Different in Cs3C60: Superconductivity sets in at very low pressures of several 100 bar and the transition temperature keeps increasing with increasing pressure. This indicates a completely different mechanism then just broadening of the bandwidth.

Material TC (K) pext (mbar)
K3C60 18 0
Rb3C60 30.7 0
K2CsC60 24 0
K2RbC60 21.5 0
K5C60 8.4 0
Sr6C60 6.8 0
(NH3)4Na2CsC60 29.6 0
(NH3)K3C60 28 14.8

More organic superconductors

Next to the three major classes of organic superconductors (SCs) there are more organic systems becoming superconducting at low temperatures or under pressure. A few examples shall be presented here.

TTP-based SCs

TMTTF as well as BEDT-TTF are based on the molecule TTF (tetrathiafulvalene). Using TTP (tetrathiapentalene) as basic molecules one receives a variety of new organic molecules serving as cations in organic crystals. And some of them are superconducting. This class of superconductors was only reported recently and investigations are still under process.

Phenanthrene-type SCs

Instead of using sulfated molecules or the fairly big Buckminster fullerenes recently it became possible to synthesize crystals from the hydrocarbon picene and phenanthrene. Doping the crystal Picene and Phenanthrene with some alkali metals such as potassium or rubidium and annealing for several days leads to superconductivity with transition temperatures up to 18 K. For the AxPhenanthrene, the superconductivity is possible unconventional. Bpth phenanthrene and picene are called phenanthrene-edge-type polycyclic aromatic hydrocarbon. The increasing number of benzene rings results in higher Tc.

Graphite intercalation SCs

Putting foreign molecules or atoms between hexagon graphite sheets leads to ordered structures and to superconductivity even if neither the foreign molecule or atom nor the graphite layers are metallic. Several stoichiometries have been synthesized using mainly alkali atoms as anions.

Several TCs for unusual SCs

Material TC (K)
(BDA-TTP)2AsF6 5.8
(DTEDT)3Au(CN)2 4
K3.3Picene 18
Rb3.1Picene 6.9
K3Phenanthrene 4.95
Rb3Phenanthrene 4.75
CaC5 11.5
NaC2 5
KC8 0.14

References

  1. ^ The Physics of Organic Superconductors and Conductors, A.G. Lebed (Ed.), (Springer Series in Materials Science , Vol. 110, 2008), ISBN: 978-3-540-76667-4
  2. ^ J. Singleton and C. Mielke "Quasi-two-dimensional organic superconductors: a review." at arXiv
  3. ^ H. Shimahara: Theory of the Fulde-Ferrell-Larkin-Ovchinnikov State and Application to Quasi-Low-Dimensional Organic Superconductors, in: A.G. Lebed (ed.): The Physics of Organic Superconductors and Conductors, Springer, Berlin (2008).

Further reading and external links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Superconductor — Supraleiter sind Materialien, deren elektrischer Widerstand beim Unterschreiten einer kritischen Temperatur Tc sprunghaft auf einen unmessbar kleinen Wert fällt. Ein Magnet schwebt über einem mit flüssigem Stickstoff gekühlten… …   Deutsch Wikipedia

  • Unconventional superconductor — Unconventional superconductors are materials that display superconductivity but that do not conform to BCS theory and Nikolay Bogolyubov theory or its extensions.The first unconventional triplet superconductor, organic material (TMTSF)2PF6,was… …   Wikipedia

  • Superconductivity — is a phenomenon occurring in certain materials generally at very low temperatures, characterized by exactly zero electrical resistance and the exclusion of the interior magnetic field (the Meissner effect).The electrical resistivity of a metallic …   Wikipedia

  • Klaus Bechgaard — (born March 5, 1945 in Copenhagen, Denmark) is a Danish scientist and chemist, noted for being one of the first scientists in the world to synthesize a number of organic charge transfer complexes and demonstrate their superconductivity, threreof… …   Wikipedia

  • Yttrium barium copper oxide — IUPAC name barium copper yttrium oxide …   Wikipedia

  • Charge-transfer complex — A charge transfer complex (CT complex) or electron donor acceptor complex is an association of two or more molecules, or of different parts of one very large molecule, in which a fraction of electronic charge is transferred between the molecular… …   Wikipedia

  • Charge transfer complex — A charge transfer complex (or CT complex, electron donor acceptor complex) is a chemical association of two or more molecules, or of different parts of one very large molecule, in which the attraction between the molecules (or parts) is created… …   Wikipedia

  • Bechgaard salt — A Bechgaard Salt is any one of a number of organic charge transfer complexes that exhibit superconductivity at low temperatures [The Physics of Organic Superconductors and Conductors, A.G. Lebed (Ed.), (Springer Series in Materials Science , Vol …   Wikipedia

  • Conductive polymer — This article is about bulk applications of conductive polymers. For single molecule electronics, see Molecular scale electronics. Chemical structures of some conductive polymers. From top left clockwise: polyacetylene; polyphenylene vinylene;… …   Wikipedia

  • Charge ordering — (CO) is a (first or second order) phase transition occurring mostly in strongly correlated materials such as transition metal oxides or organic conductors. Due to the strong interaction, the charge is localized on different sites leading to a… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”