Sponge rubber ball (Taprogge System)

Sponge rubber ball (Taprogge System)

A sponge rubber ball serves for tube cleaning and is used for removing fouling from the tubes of shell-and-tube heat exchangers in general and from the cooling tubes of condensers in particular. For this purpose the ball is used in quantities from 20 to up to several thousands, depending on the special application, in the so-called Taprogge System. The sponge rubber ball is added to the cooling water flow via a special ball injection and is transported through the tubes to be cleaned by the cooling water. At the other end of the condenser there is a strainer in the same nominal diameter as the cooling water pipe by means of which the balls can be separated again from the cooling water flow. A rotary pump looks after the transport of the balls back to the ball injection point – and we've come full circle. Under normal conditions the balls can remain in use for a maximum four weeks.

Sponge rubber balls are produced in diameters from 10 mm to 45 mm. They are made of biodegradable natural rubber which is worked in a vulcanizing process. In the course of vulcanizing the balls get their diameters and further desired properties:

* the defined surface condition
* the desired elasticity to influence the contact pressure in the tube
* a fixed density to influence the buoyancy behaviour

Decisive for the effectiveness of the cleaning is a ball diameter that is adjusted to the tube, as well as the surface property of the cleaning ball. The buoyancy has an influence on the distribution of the balls to the individual tubes of the tube bundle. During production various dyes are added which mark the ball properties.

To improve the cleaning effect, the balls can be provided with a coating. If particularly hard scales have to be removed, corundum is used as coating material. Another addition is pumice which removes surface roughness in the tubes through polishing. Other added substances improve the temperature resistance of the balls, so that they can be applied in the heat exchangers of seawater desalination plants.

The definition of the size of the sponge rubber ball and of its further properties depends on a multitude of parameters and should always be made by the producer.


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Taprogge — GmbH is a medium sized company based in Wetter, Germany. The company is named after founding brothers Ludwig and Josef Taprogge. Founded in 1953, the company is known for its tube cleaning systems for steam turbine condensers, heat exchangers and …   Wikipedia

  • Sponge (disambiguation) — Sponge may refer to:* Sponges, animals of the phylum Porifera * Sponge (tool), a tool consisting of porous material used for cleaning impervious surfaces ** Sponge rubber tube cleaning ball, serves for tube cleaning in the so called Taprogge… …   Wikipedia

  • Tube cleaning — The process of tube cleaning describes the activity of, or device for, the cleaning and maintenance of fouled tubes. The need for cleaning arises because the that is transported through the tubes may cause deposits and finally even obstructions.… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”