Otis Elevating Railway

Otis Elevating Railway
The Otis Junction Station after the railroad's reconstruction in 1904.

The Otis Elevating Railway was a cable funicular railroad to the Catskill Mountain House in Palenville, New York. For the first 64 years of its existence, the Catskill Mountain House was accessible only by a long stage coach from Catskill Landing on the Hudson. Faced with increased competition from the Hotel Kaaterskill, served by the Kaaterskill Railroad, Charles Beach hired the Otis Elevator Company to build a cable funicular railroad straight up the Wall Of The Manitou. Opening on August 7, 1892, the line was 7,000' long with a rise of 1,630', a maximum grade of 34%, and an average grade of 12%. In 1904, the line was shortened and the lower trestle eliminated.

A cable pulled the specially-designed passenger cars up the mountain, with the car having a mechanism that hooked onto the cable. To balance the system there were two cars. The cars were built by Jackson & Sharp Co. in 1892, and each car could seat 75 passengers. The cars were named Rickerson and Van Santvoord. A small open-air baggage car was coupled to the downhill end of each passenger car.

The cable was pulled by two Hamilton Corliss steam engines that spun a set of cogwheels that drove the cable. Each engine was 12 inches in diameter and had a 30-inch stroke. Steam was supplied by two Manning Patent vertical tubular boilers. As one car went up from the bottom of the incline, the other car went down from the top of the incline. There was a passing track in the middle of the run where the track split in two, and then rejoined. This was so the cars could pass each other without colliding, as they shared the center rail above and below the passing track.

The Otis Railway and the Catskill Mountain Railway had several freight cars interchangeable with both the Catskill and Tannersville Railway at Summit Station and the Catskill Mountain Railway at Junction Station. The freight cars were 22 feet long and had a capacity of 5 tons or 8 tons.[1] One car could be carried at a time coupled below the coach. Boxcars were Otis Ry. 1, Otis Ry. 2, C.M. Ry. 17 & C.M. Ry. 18. Gondolas were Otis Ry. 3, Otis Ry. 4, C.M. Ry. 15 & C.M. Ry. 16. [2][3] In operation, a single freight car could be coupled to the downhill end of the open-air baggage car.

The Otis Junction station (pictured right after the 1904 reconstruction) connected the Otis to the Catskill Mountain Railway, a 15 mile railroad between Catskill Landing and Palenville, New York. At the Otis Summit station at the top, it connected to the Catskill and Tannersville Railway, that ran the 5.2 miles to Tannersville. In 1918, all three railroads were closed and sold for scrap. The two cars survive to this day. Soon after the railroad was scrapped, the coaches were shipped to Lookout Mountain, where they now serve the Lookout Mountain Incline Railway.

Stations

  • Otis Junction Station
  • Otis Summit Station

References

  • Helmer, William F. (1970). Rip Van Winkle Railroads. Howell-North Books. ISBN 0-8310-7079-X. 
  1. ^ The Helmer (1970) reference states "5 tons" at page 83, and states "8 tons" at page 137.
  2. ^ Annual Report of the Board of Railroad Commissioners of the State of New York. New York State Legislature. , various dates.
  3. ^ Poor, Henry V. and Henry W. Poor (various years). Poor’s Manual of Railroads. H.V. and H.W. Poor Co. , various dates.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Otis Elevator Company — Type Subsidiary of UTC Industry Vertical Transport Systems Founded 1853 (acquired in 1976) …   Wikipedia

  • Catskill and Tannersville Railway — The Catskill and Tannersville Railway was a historic narrow gauge railroad operating in New York.Also known as The Huckleberry , the C T operated tracks that were laid to a three foot gauge. The railroad commenced at the Otis Summit station in… …   Wikipedia

  • Catskill Mountain Railway — The Catskill Mountain Railway (CMRy) was a narrow gauge (3 ) railroad, convert|15.73|mi|km long, running from Catskill to Palenville in Greene County, New York.Organized as the Catskill Mountain Railroad (CMRR) in 1880, construction was begun in… …   Wikipedia

  • List of New York railroads — Current and former railroads in New York The following railroads operate in the U.S. state of New York. Contents 1 Common freight carriers …   Wikipedia

  • Ulster and Delaware Railroad — Locale Kingston Point, NY to Oneonta, NY, Hunter, NY Kaaterskill, NY …   Wikipedia

  • Catskill Mountain House — The Catskill Mountain House was a famous hotel near Palenville, New York in the Catskill Mountains overlooking the Hudson River Valley, built in 1824. In its prime, from the 1850s to the turn of the century, it was visited by three U.S.… …   Wikipedia

  • Narrow gauge railroads in the United States — Standard gauge was favored for railway construction in the United States, although a fairly large narrow gauge system developed in the Rocky Mountains of Colorado. Isolated narrow gauge lines were built in many areas to minimize construction… …   Wikipedia

  • Ulster and Delaware Railroad — L Ulster and Delaware Railroad (U D), fondé en 1866, était un chemin de fer américain de classe I qui opérait dans l état de New York. Lors de son extension maximale, le U D quittait Kingston Point sur le fleuve Hudson, traversait le centre des… …   Wikipédia en Français

  • List of funicular railways — This is a list of funicular railways, organised place within country and continent. The funiculars range from short urban lines to significant multi section mountain railways.Africaflag|South Africa* Cape of Good Hope, Flying Dutchman… …   Wikipedia

  • Ulster & Delaware Railroad Historical Society — The Ulster Delaware Railroad Historical Society is a chapter of the National Railway Historical Society (NRHS). It focuses on the history of the railroads and related social, economic, and cultural institutions of the Catskill and Hudson Valley… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”