Pennsylvania Railroad

Pennsylvania Railroad

Infobox SG rail
railroad_name=Pennsylvania Railroad
logo_filename=Pennsylvania_Herald.pnglogo_size=100
marks=PRR
locale=Chicago and St. Louis to New York City and Washington, DC
start_year=1846
end_year=1968
successor_line=Penn Central
old_gauge=
hq_city=Philadelphia, Pennsylvania
The Pennsylvania Railroad reporting mark|PRR was an American railroad, founded in 1846. Commonly referred to as the "Pennsy," the PRR was headquartered in Philadelphia, Pennsylvania.

The PRR was the largest railroad by traffic and revenue in the U.S. throughout the Twentieth Century and was at one time the largest publicly traded corporation in the world. At its peak, it controlled about convert|10000|mi|km of rail line. During its history, the PRR merged with or had an interest in at least 800 other rail lines and companies. [cite web |title = Pennsylvania Railroad Company Inspection of Physical Property Board of Directors and Arbiters|date = November 10-11-12, 1948 |url = http://www.railsandtrails.com/PRR/BOD1948/history.html |accessdate = 2007-08-27] The PRR corporation still holds the record for the longest continuous dividend history: it paid out annual dividends to shareholders for more than 100 years in a row. [cite web |title = The Erie Lackawanna Limited — The Pennsylvania Railroad |url = http://jimmancuso1.tripod.com/id12.html |accessdate = 2007-08-27] The budget for the PRR was larger than that of the U.S. government and they employed approximately 250,000 workers.cite web |title = Railfan's Guide to the Altoona Area |publisher = www.trainweb.org |url = http://www.trainweb.org/horseshoecurve-nrhs/Guide.htm |accessdate = 2007-08-24]

In 1968, the Pennsylvania Railroad merged with its rival, the New York Central Railroad, to form Penn Central Transportation. The ICC required that the ailing New York, New Haven & Hartford Railroad be added in 1969. A series of events including inflation, poor management, abnormally harsh weather and the withdrawal of a government-guaranteed 200-million-dollar operating loan forced the Penn Central to file for bankruptcy protection on June 21, 1970. [cite web |title = Chapter 1: History of the Altoona Railroad Shops Heading 14. The Elimination Of the Older Railroad Shop Buildings In The 1960s And After paragraph 6 |publisher = United States National Park Service |work = National Park Service Special History Study | date = 2004-10-22 |url = http://www.nps.gov/history/history/online_books/railroad/shs1d.htm |accessdate = 2007-08-21] The Penn Central rail lines were then divided between Conrail and Amtrak.

The Pennsylvania Railroad's corporate symbol was the keystone, which is Pennsylvania's state symbol, with the letters PRR intertwined inside. When colored, it was bright red with silver-grey molding and lettering.

History

Main line

The Commonwealth of Pennsylvania, as part of the Main Line of Public Works, chartered the Pennsylvania Railroad in 1846 to build a rail line that would connect Harrisburg to Pittsburgh. [ cite web |title = History of the Altoona Railroad Shops: The Creation And Coming Of The Pennsylvania Railroad |work = National Park Service Special History Study |publisher = United States National Park Service |date = 2004-10-22 |url = http://www.nps.gov/history/history/online_books/railroad/shs1.htm |accessdate = 2007-08-21 ] This western line from Harrisburg would complete the main line, which was to be a railroad and canal corridor across the state.Work on the western part of the main line was completed in 1854 and rail service from Philadelphia across the state to Pittsburgh was available. In 1857 the PRR purchased the main line from the State of Pennsylvania. This line is still an important cross-state corridor, composed of Amtrak's Philadelphia to Harrisburg Main Line and the Norfolk Southern Railway's Pittsburgh Subdivision.

New York, Baltimore and Washington lines

In the early 1860s, the PRR gained control of the Northern Central Railway, giving it access to Baltimore, Maryland, along the Susquehanna River via connections at Columbia, Pennsylvania, or Harrisburg.

On December 1, 1871, the PRR leased the United New Jersey Railroad and Canal Companies, which included the original Camden and Amboy Railroad from Camden, New Jersey (across the Delaware River from Philadelphia) to South Amboy, New Jersey (across Raritan Bay from New York City), as well as a newer line from Philadelphia to Jersey City, New Jersey, much closer to New York, via Trenton, New Jersey. Track connection in Philadelphia was made via the United Companies' Connecting Railway and the jointly owned Junction Railroad (Philadelphia). [cite web |title = PRR Chronology 1871 |work = PRR Research |publisher = Philadelphia Chapter Pennsylvania Railroad Technical & Historical Society |url = http://www.prrths.com/Hagley/PRR1871%20Jan%2005.pdf |date = January 2005 Edition |accessdate = 2007-08-27|format=PDF]

The PRR's Baltimore and Potomac Rail Road opened on July 2, 1872, between Baltimore, Maryland and Washington, D.C. This route required transfer via horse car in Baltimore to the other lines heading north from the city. On June 29, 1873, the Baltimore and Potomac Tunnel through Baltimore was completed. The PRR initiated the misleadingly named Pennsylvania Air Line service via the Northern Central Railway and Columbia, Pennsylvania. This service was 54.5 miles (87.5 km) longer than the old route but avoided the transfer in Baltimore. The Union Railroad (Baltimore) line opened on July 24, 1873. This route eliminated the transfer in Baltimore. PRR officials contracted with both the Union Railroad and the Philadelphia, Wilmington and Baltimore Railroad (PW&B) Railroad for access to this line. The PRR's New York–Washington trains began using the route the next day, ending Pennsylvania Air Line service. In the early 1880s, the PRR acquired a majority of PW&B Railroad's stock. This action forced the Baltimore and Ohio Railroad to build the Baltimore and Philadelphia Railroad to keep its Philadelphia access, where it connected with the Reading Railroad for its competing Royal Blue Line passenger trains to reach New York.

In 1885, the PRR began passenger train service from New York City to Washington, D.C. with limited stops along the route. This service became known as the "Congressional Limited Express." The service expanded, and by the 1920s, the PRR was operating hourly passenger train service between New York and Washington. In the early 1950s, 18-car stainless steel streamliners were introduced on the "Morning Congressional" and "Afternoon Congressional" between New York and Washington, as well as the "Senator" from Boston to Washington, D.C. [William W. Kratville, "Steam, Steel & Limiteds". Omaha, Neb.: Barnhart Press, 1962.] [cite web |title = The Congressionals and the Senator |publisher = www.steamlocomotive.com |url = http://www.steamlocomotive.com/GG1/passenger.shtml |accessdate = 2007-08-28] In 1912, the "Broadway Limited" was started. This train ran from New York City to Chicago, via Philadelphia, with an additional section between Harrisburg and Washington (later operated as a separate Washington–Chicago train, the "Liberty Limited").

"Low-grade" lines

Around 1900, the PRR built several low-grade lines for freight to bypass areas of steep grade (slope). These included the following:
*1892 — Trenton Branch (PRR) and Trenton Cut-Off Railroad from Glen Loch, Pennsylvania east to Morrisville, Pennsylvania (not only a low-grade line but a long-distance bypass of Philadelphia)
*1892 — Waverly and Passaic Railroad (finished by the New York Bay Railroad) from Waverly, New Jersey to Kearny, New Jersey
*1904 — Reopening of the New Portage Railroad from the Gallitzin Tunnels east to New Portage Junction, then continuing north over the Hollidaysburg Branch to Altoona
*1906 — Philadelphia and Thorndale Branch from Thorndale, Pennsylvania east to Glen Loch "(abandoned by Conrail in 1989)"
*1906 — Atglen and Susquehanna Branch from Harrisburg via the Northern Central Railway south to Wago Junction, then east to Parkesburg "(abandoned by Conrail in 1990)"

The Pennsylvania and Newark Railroad was incorporated in 1905 to build a low-grade line from Morrisville, Pennsylvania to Colonia, New Jersey. It was never completed, but some work was done in the Trenton area, including bridge piers in the Delaware River. North of Colonia, the alignment was going to be separate, but instead two extra tracks were added to the existing line. Work was suspended in 1916.

Pennsylvania Railroad rail line electrification project

Early in the 20th century, the PRR began construction to electrify some of their rail lines. The initial construction was in the New York terminal area, including some of the tunnels. This was a direct current (DC) low-voltage system that supplied power through a third rail. The system was put into service in 1910. cite web |title = Pennsylvania RR Electrification |publisher = Northeast Railfan.net |url = http://www.northeast.railfan.net/classic/PRRdata9.html |accessdate = 2007-08-25]

The next area to be electrified was the Philadelphia terminal area. After researching and experimenting with different power systems, PRR officials decided to use overhead lines to supply power to the trains. Unlike the New York terminal system, the overhead wires would carry high-voltage alternating current (AC) power. This became the type of system used for all future installations. In 1915, electrification of the line from Philadelphia's Broad Street Station to Paoli, Pennsylvania was completed. Other Philadelphia lines electrified were the Chestnut Hill Branch (1918), White Marsh (1924), West Chester (1928), and in 1930 the Norristown branch along with the main line to Trenton, New Jersey.

PRR's president William Atterbury announced in 1928 plans to electrify the lines between New York, Philadelphia, Washington and Harrisburg. In January 1933, through main-line service between the principal cities was placed in operation. The first test run of an electric train between Philadelphia and Washington occurred on January 28, 1935. On February 1 the Congressional Limiteds in both directions were the first trains in regular electric operation between New York and Washington, drawn by the first of the GG1 type locomotives. All regular passenger trains between these cities were electrified by March 15, and shortly thereafter through trains to the west were electrically operated from New York City to Paoli, Pennsylvania.

To complete the electrification project initiated in 1928, work was started January 27, 1937, on the main line from Paoli, Pennsylvania to Harrisburg; the low-grade freight line from Morrisville through Columbia to Enola Yard in Pennsylvania; the freight line from Perryville to Columbia; and the freight line from Monmouth Junction to South Amboy. In less than a year—on the following January 15—the first passenger train—the "Metropolitan"—went into operation over the newly electrified line from Philadelphia to Harrisburg. On April 15 the electrified freight service from Harrisburg and Enola Yard east was inaugurated, thus completing the Pennsy's eastern seaboard electrification program with a total of convert|2677|mi|km of track electrified—41 percent of the total electrically operated standard railroad trackage of the United States. [cite web |title = Electrification History to 1948 |work = Pennsylvania Railroad Electrification |publisher = www.railsandtrails.com |url = http://www.railsandtrails.com/PRR/BOD1948/electric.htm#text |accessdate = 2007-08-25]

Railroad shops

In 1849, PRR officials developed plans to construct a repair facility at Altoona. Construction was started in 1850, and soon a long building was completed that housed a machine shop, woodworking shop, blacksmith shop, locomotive repair shop and foundry. This facility was later torn down to make room for continuing expansion.

In time additional PRR repair facilities were located in Harrisburg, Pittsburgh, and Mifflin, and the Altoona Works expanded in adjacent Juniata, Pennsylvania. Inventor Alexander Graham Bell sent two assistants to the Altoona shops in 1875 to study the feasibility of installing telephone lines. In May 1877, telephone lines were installed for various departments to communicate with one another. [cite web |title = History of the Altoona Railroad Shops Chapter 1 Heading 7 The Altoona Railroad Shops After The Civil War Paragraph 10 |work = National Park Service Special History Study |publisher = United States National Park Service |date = 2004-10-22 |url = http://www.nps.gov/history/history/online_books/railroad/shs1.htm |accessdate = 2007-08-21 ] By 1945 the Altoona Works had grown to be one of the largest repair and construction facilities for locomotives and cars in the world. [cite web |title = Chapter 4: Significance and Recommendations for Future Research 1. Significance of Altoona Works |work = National Park Service Special History Study |publisher = United States National Park Service |date = 2004-10-22 |url= http://www.nps.gov/history/history/online_books/railroad/shs4.htm |accessdate = 2007-08-21 ] During World War II, PRR facilities (including the Altoona Shops) were on target lists of German saboteurs. They were caught before they could complete their missions.

In 1875 the Altoona Works started a testing department for PRR equipment. In following years, the Pennsylvania Railroad led the nation in the development of research and testing procedures of practical value for the railroad industry. [cite web |title = History of the Altoona Railroad Shops National Park Service Special Hisory Study CHAPTER 1:HISTORY OF THE ALTOONA RAILROAD SHOPS (continued)13. CHANGES AFTER WORLD WAR II |work = National Park Service Special History Study |publisher = United States National Park Service |date = 2004-10-22 |url = http://www.nps.gov/history/history/online_books/railroad/shs1d.htm|accessdate = 2008-03-04 ] Use of the testing facilities were discontinued in 1968 and many of the structures were demolished.

Penn Central merger

On February 1, 1968, the PRR merged with their arch-rival, the New York Central railroad, to form the Penn Central. The ICC required that the ailing New York, New Haven & Hartford Railroad be added in 1969. A series of events including inflation, poor management, abnormally harsh weather conditions and the withdrawal of a government-guaranteed 200-million-dollar operating loan forced the Penn Central to file for bankruptcy protection on June 21, 1970. [cite web |title = Chapter 1: History of the Altoona Railroad Shops Heading 14. The Elimination Of the Older Railroad Shop Buildings In The 1960s And After paragraph 6 |publisher = United States National Park Service |work = National Park Service Special History Study | date = 2004-10-22 |url = http://www.nps.gov/history/history/online_books/railroad/shs1d.htm |accessdate = 2007-08-21] The Penn Central rail lines were split between Amtrak (Northeast Corridor and Keystone Corridor) and Conrail in the 1970s. After the breakup of Conrail in 1999, the portion which had formerly been PRR territory largely became part of the Norfolk Southern Railway.

Timeline

* 1846 The Pennsylvania Railroad is chartered to construct a rail line from Harrisburg to Pittsburgh.
* 1850 Construction started on repair shop at Altoona.
* 1860–1890 PRR expands throughout the U.S.
* 1885 The "Congressional Limited Express" from New York City to Washington D.C. is introduced.
* 1894 The Pennsylvania Pacific Corporation is formed by the PRR.
* 1902 The Pennsylvania Special was inaugurated between New York Penn Station and Chicago Union Station. The Pennsylvania Special later became the Broadway Limited, PRR's flagship.Fact|date=July 2008
* 1910 New York terminal and tunnels are electrified.
* 1915 PRR electrifies its suburban Philadelphia lines between Central Philadelphia and Paoli.
* 1916 PRR adopts new motto, "Standard Railroad of the World". The first I1s "Decapod" locomotive is completed, and switching locomotives of the A5s and B6sb class are introduced.
* 1918 PRR stock bottoms at $40¼, the lowest since 1877, due largely to Federal railroad control. Emergency freight is routed through New York Penn Station and the Hudson tunnels by the USRA to relieve congestion. Locomotive class N1s is introduced for PRR's western lines. The PRR electrifies the suburban Philadelphia commuter line between Central Philadelphia and Chestnut Hill.
* 1928–1938 PRR electrified its New York–Washington main line, the Chicago–Philadelphia main line between Harrisburg and Paoli, several Philadelphia and New York area commuter lines, and major through freight lines.
*1946 The PRR reported a net loss for the first time in its history.Fact|date=July 2008
*1957 Steam locomotives are removed from active service in the PRR fleet.
*1968 Pennsylvania Railroad merges with New York Central to form the Penn Central.
*1970 The Penn Central files for bankruptcy protection on June 21, 1970.

Equipment

tandard Railroad of the World

In 1916 the PRR began using the slogan Standard Railroad of the World. This meant that it was perceived as the standard to which all other railroads aspired. cite web |title = February 2006 Meeting |publisher = Rivanna Chapter National Railway Historical Society Charlottesville, Virginia |date = January 15, 2006 |url = http://avenue.org/nrhs/february06.htm |accessdate = 2007-08-31] For a long time this was true. The PRR had an impressive list of firsts, greatests, biggests, and longests. It was the first railroad to completely replace wooden-bodied passenger cars with steel-bodied cars. Over its history it led the way in many safety and efficiency improvements. In later years the PRR abandoned the use of the slogan.

The Pennsylvania Railroad was "standard" in another way. It was an early proponent of standardization. While other railroads used whatever was available, the PRR tested and experimented with equipment designs. When they found the right design, it became standard across the whole company. This gave the railroad a feel of uniformity, and it also reduced costs. This was unlike other railroads who purchased locomotives and railroad cars in small lots, taking whatever was available from manufacturers at the time. The PRR was also an early adopter of standard color schemes for their equipment.

Equipment colors and painting

As noted above, the PRR colors and paint schemes were standardized. Locomotives were painted in a shade of green so dark it seemed almost black. The official name for this color was DGLE (Dark Green Locomotive Enamel). Often it was referred to as "Brunswick Green". The undercarriage of the locomotives were painted in black referred to as True Black. The passenger cars of the Pennsylvania Railroad were painted Tuscan Red. This is a brick colored shade of red. Some electric locomotives and most passenger-hauling diesel locomotives were also painted in Tuscan Red. Freight cars of the PRR had their own color. It was known as Freight Car Color which was an iron-oxide shade of red. On passenger locomotives and cars, the lettering and out-lining was originally done in real gold leaf. After World War II the lettering was done in a light shade of yellow called Buff Yellow. [cite book |last = Fischer |first = Ian S. |title = "PRR Color Guide to Freight and Passenger Equipment" |publisher = Morning Sun Books ]

Signaling

The Pennsylvania Railroad was one of the first railroads to use position-light signals trackside. [cite web |title = Roy's Super Toy Shop presents PRR Steam |publisher = Roy's Super Toy Shop |url = http://prrsteam.mrdek.com/numbers.html |accessdate = 2007-08-26] The signals were designed to replace semaphore signals. Visibility in foggy conditions was one of the factors for the development of this type of signal. A position-light signal used a large round target (sign) with an array of up to nine lights. Eight lights are arranged in a circle near the edge of the target with another light positioned in the center. The lights in position-light signals used amber-colored lenses, which could penetrate fog. With a position signal light, the positioning of the light display determined the meaning of the message. The design also allowed train personnel to recognize the signal aspect even when one light in a row was inoperative.

Signal aspects were displayed as rows of three lit lights. These signal aspects corresponded with upper-quadrant semaphore signal positions: vertical display for proceed, a 45° angle display for approach, and horizontal display for stop. Additionally, a row of lights at a 45° angle leaning left of vertical (perpendicular to the approach aspect) was also used for a restricting aspect. A "X" shape was a "take siding" aspect (message) and a full circle was a "raise pantograph" aspect in electrified territory. Additional aspects were conveyed with a second target head below the first, either a single light, a partial target, or a full target, depending on the location.

In later years, the two outside lights in the horizontal "stop" row were often given red lenses, and the center lamp would be extinguished when the signal displayed a stop aspect. [cite web |title = PRR Signals |publisher = Philadelphia Chapter Pennsylvania Railroad Technical & Historical Society |url = http://www.prrths.com/PRR_Signals.html |accessdate = 2007-08-24]

team locomotives

For most of its existence, the PRR was conservative in its locomotive power choices and pursued a path of standardization, both in locomotive types and their component parts. Almost alone among American railroads, the PRR designed most of its steam locomotive classes itself and built a proportion of them in its Altoona Works. The PRR is believed to have been the 4th-most prolific U.S. builder of steam locomotives.

Outside builders were used due to the sheer number of locomotives the PRR ordered. The number required exceeded the capacity that its own shops could produce. PRR used a commercial builder as a subcontractor, building exact replicas of an existing PRR design. cite web |title = Pennsylvania Railroad Mikados |publisher = Steam Locomotive.com |date = February 8, 2007 |url = http://www.steamlocomotive.com/mikado/prr.shtml |accessdate = 2007-08-31] This was unlike most railroads who gave only a broad specification, thereby leaving the majority of the decision making and design to the locomotive builder.

When it needed to use a commercial locomotive builder, the PRR favored Philadelphia's Baldwin Locomotive Works. Baldwin was a major PRR customer, receiving its raw materials and shipping out its finished products on PRR lines. Moreover, the two companies were headquartered in the same city, with PRR and Baldwin management, along with the engineers, knowing each other well. When both the PRR and Baldwin shops were at capacity, orders went to the Lima Locomotive Works in Lima, Ohio. Only as a last resort would the PRR use the American Locomotive Company (ALCO) based in Schenectady, New York. This may have been due to the fact that Alco was serviced by, as well as the favorite locomotive supplier to, the PRR's arch-rival: the New York Central Railroad.

The PRR had a design style that it favored in its locomotives. One example is the square-shouldered Belpaire firebox. This British style firebox was a PRR trademark that was rarely used by other locomotive builders in the United States. Also, the PRR used track pans extensively to pick up water, for the locomotive, while on the move. Using this system meant that the tenders of their locomotives had a comparatively large proportion of coal (which could not be taken on board while running) compared to water capacity. Locomotives of the PRR had a clean look to them. Only necessary devices were used and they were mounted neatly on the locomotive.Smoke box fronts bore a round locomotive number board denoting a freight locomotive or a keystone number board denoting a passenger locomotive. Otherwise, the smoke box was uncluttered with the exception of a headlamp mounted at the top and a steam-driven turbo-generator behind it. In later years the positions of the two were reversed, since the generator needs more maintenance than the lamp.

Each class of steam locomotive was assigned a class designation. [ cite web |title = Roy's Super Toy Shop presents PRR Steam |publisher = Roy's Super Toy Shop |url = http://prrsteam.mrdek.com/numbers.html |accessdate = 2007-08-26] Early on, this was simply an alphabetical letter, but when these began to run out, the scheme was changed so that each wheel arrangement had its own letter, and different types of the same arrangement were defined by a subsequent number. Subtypes were in turn indicated by a lower-case letter; superheating was designated by an "s" until the mid 1920s, by which time all new locomotives were superheated. Thus, for example, a K4sa class was a 4-6-2 "Pacific" type (K) and of the fourth class of Pacifics designed by the PRR. It was superheated (s) and was of the first variant type (a) after the original (unlettered). Steam locomotives remained part of the PRR fleet until 1957 when they were retired from active service.

It should be noted that the PRR's reliance on steam locomotives in the mid 20th century was a factor contributing to its downfall. Steam locomotives require more maintenance than diesel locomotives, are less cost efficient, and requires more personnel to operate. Also, the PRR was unable to update its fleet during the World War II years, and by the end of the war their fleet was in rough shape. The PRR's competitors managed this period better with their diesel locomotive fleets. The PRR was historically-minded when it voluntarily preserved a roundhouse-full of representative steam locomotives at Northumberland, Pennsylvania in 1957, and kept them there for several decades. These locomotives are now at the Railroad Museum of Pennsylvania in Strasburg, Pennsylvania. In sharp contrast, the New York Central's Alfred E. Perlman deliberately scrapped all but two large NYC steam locomotives, and these survived only by accident. [New York Central Railroad]

On December 18, 1987 the Commonwealth of Pennsylvania designated the Pennsylvania Railroad's K4s as the official State Steam Locomotive. The two surviving Locomotives can be seen on display at Strasburg and Altoona. cite web |title = Hello Pennsylvania — State Symbols |publisher = Commonwealth of Pennsylvania |url = http://www.legis.state.pa.us/WU01/VC/visitor_info/hello_pennsylvania/symbols.htm |accessdate = 2007-09-01]

Electric locomotives

When the work on the Hudson River tunnels and Pennsylvania Station was in progress, the type of electric locomotives to be used was an important consideration. At that time just a few electric locomotives had been built anywhere. Several experimental locomotives were designed by railroad and Westinghouse engineers and tried on the West Jersey track. From these tests the DD1 class was developed. The DD1s were used in pairs (back to back). Thirty-three of these engines having Westinghouse equipment were built at Altoona. They were capable of speeds up to 85 miles per hour. Placed in service in 1910, they proved to be very efficient.

Various types of locomotives were being designed for the long-range electrification program. The first equipment to be put into service consisted of 93 motor cars, and by 1924 there were 286 cars of this type in use. By 1935 the motor and trailer equipment totaled 43 units, with the number eventually reaching 524 units.

The most powerful single-unit electric locomotive ever built was tried in 1917 and used experimentally for a number of years. This engine was classed the FF1 and had a side-rod drive. This class developed a tractive force of 140,000 pounds.

In 1924 another type of side-rod locomotive was designed (the L5 class), and three engines were built. Two were DC engines for use in the New York electrified zone and the third, road number 3930, was AC-equipped and put in service at Philadelphia. Later, 21 more L-5 locomotives were built for the New York service. A six-wheeled switching engine was the next electric motive power designed, being classified as B1. Of the first 16 AC engines, two were used at Philadelphia and 14 on the Bay Ridge line, while 12 DC-equipped engines were assigned to Sunnyside Yard.

The O1 class was a light passenger type. Eight of these engines were built from June 1930 to December 1931. The P5 class was also introduced, with two of this class being placed in service during July and August 1931. cite web |title = Ztrains The PRR Class GG1 |publisher = www.ztrains.com |url = http://www.ztrains.com/pages/rail/strasburg/blackjack.html |accessdate = 2007-08-26] Following these came the P5A, a slightly heavier design capable of traveling 80 miles per hour and with a tractive force of 56,250 pounds. In all, 89 of these locomotives were built. The first had a box cab design and were placed in service in 1932. The following year, the last 28 under construction were redesigned to have a streamlined type of cab. Some of these engines underwent regearing for freight service.

In 1933 two entirely new locomotives were being planned. These were the R1 and the GG1 class. The R-1 had a rigid frame for its four driving axles, while the GG-1 had two frames which were articulated. Both of these prototypes, along with an O-1, a P5A and a K4s steam locomotive underwent exhaustive testing. Testing was conducted over a special section of test track near Claymont, Delaware and lasted for nearly two years. As a result of these experiments, the GG1 type was chosen and the construction of 57 locomotives was authorized. The first GG1 was finished in April, and by August 1935 all 57 were completed. These first GG1 engines were designated for passenger service, while most of the P5A type were made available for freight service. Some of the later-built GG1s were assigned to freight service as well. The total number of GG1s built was 139. They are rated at convert|4620|hp at speeds of convert|100|mi|km an hour.

On August 26, 1999, The United States Postal Service issued commemorative 33-cent "All Aboard! 20th Century American Trains" stamps. These commemorative stamps featured five celebrated American passenger trains from the 1930s and 1940s. One of the five stamps features an image of a GG-1 locomotive pulling the "Congressional Limited Express." The official Pennsylvania State Electric Locomotive is the GG-1 #4859. It received this designation on December 18, 1987 and is currently on display in Harrisburg, Pennsylvania.

Diesel locomotives

In the mid 1940s, the PRR began to add diesel locomotives to their fleet. From 1945 through 1949 it purchased 74 E7 class locomotives from General Motors EMD (Electro-Motive Division). These units were given the classification EP20 by the PRR. Sixty of this number were designated "A" units, meaning that they had a cab for the train crew. The remaining 14 were designated "B" units; these were cabless booster units that were controlled by an "A" unit.

Another addition to the PRR diesel locomotive fleet was the Baldwin DR-12-8-1500/2, referred to as the "Centipede." Twenty-four of these units were purchased, and PRR classified them as BP60. These units had reliability problems and were soon obsolete. They were relegated to helper service.

In 1948 the PRR purchased twenty-seven DR-6 locomotives from Baldwin Locomotive Works. These units were given the PRR classification BP20. Originally for the passenger service fleet, these locomotive proved troublesome, and some were reclassified as BF16z freight locomotives. From 1950 to 1952, the PRR purchased another group of 74 locomotives from EMD. These were EMD's E8 locomotives (successor to the E7). All of this group were "A" units. The PRR gave these units the classification EP22s. [ cite web |title = Article "Pennsylvania Railroad's E8 History" |publisher = The Gauge Magazine |date = (Volume 1 Issue 3 — April 2005) |url = http://www.gaugemag.parkdaleyard.com/history.html |accessdate = 2007-08-19]

Major passenger stations

The PRR built several grand railroad passenger stations in major cities, either alone or in conjunction with other railroads. These architectural marvels served as the hubs for the PRR's extensive passenger service. Many of these stations are still in use today, served by Amtrak as well as regional passenger carriers. See also Pennsylvania Station, the name given to many of them.

Broad Street Station - Philadelphia, PennsylvaniaBroad Street Station was the first of the great passenger stations built by the PRR. Opened in 1881, the station was dramatically expanded in the early 1890s by famed Philadelphia architect Frank Furness, and for most of its existence served with City Hall as arguably one of the crown jewels of Philadelphia's architecture, and for thirty years had the largest train shed in the world (a 91 m span). It was the terminal station for the PRR service into Philadelphia, bringing trains right into the center of the city. It was demolished in 1953 after the PRR moved all its hub service to 30th Street Station.

Union Station - Washington, D.C.Union Station, built jointly with the Baltimore and Ohio Railroad, served as a hub for PRR passenger services in the nation's capital, with connections to the B&O, and Southern Railway (US). The Richmond, Fredericksburg and Potomac Railroad provided a link to Richmond, Virginia, about convert|100|mi|km to the south, where major north–south lines of the Atlantic Coast Line Railroad and Seaboard Air Line Railroad provided service to the Carolinas, Georgia, and Florida.Penn Station - New York, New YorkThe original Pennsylvania Station was modeled on the Roman Baths of Caracalla; it was notable for its enormous rail shed and the spectacular architecture of the high vaulted ceilings in the passenger terminal. It was infamous for being demolished for redevelopment in the railroad's waning years. The station was built in 1910 to provide direct access to Manhattan from New Jersey without having to use a ferry, and was served by the PRR's own trains as well as those of the PRR's subsidiary the Long Island Rail Road. Its 1963 demolition did not extend to the platforms, the tracks, or even some of the staircases.Penn Station - Newark, New JerseyThis recently refurbished station was built in the 1930s as part of the PRR's Northeast Corridor infrastructure. Its style is a mixture of Art Deco and Neo-Classical. Amtrak still makes stops here, however this station mainly serves as a stop for three commuter lines.30th Street Station - Philadelphia, PennsylvaniaIn classical grandeur, the 30th Street Station displays its majestic—and traditional—architectural style with its enormous waiting room and its vestibules. The station, in spite of its apparent architectural classicism, was constructed in the 1930s, when modern and art deco styles were more popular. Its construction was needed to accommodate increased intercity and suburban traffic. It replaced the Broad Street Station. It is now the primary rail station in Philadelphia.Union Station - Chicago, IllinoisThe Pennsylvania Railroad, along with the Milwaukee Road and the Burlington Route, built Chicago's Union Station, the only one of Chicago's old stations to exist as a train station (the rest of Chicago's operating passenger stations have been substantially remodeled). It was designed by Graham, Anderson, Probst & White in the Beaux-Arts style.

Corporate officers

Presidents of the Pennsylvania Railroad:

* Samuel V. Merrick (1847–1849)
* William C. Patterson (1849–1852)
* J. Edgar Thomson (1852–1874)
* Thomas A. Scott (1874–1880)
* George B. Roberts (1880–1896)
* Frank Thomson (1897–1899)
* Alexander J. Cassatt (1899–1906)
* James McCrea (1907–1912)
* Samuel Rea (1913–1925)
* William W. Atterbury (1925–1935)
* Martin W. Clement (1935–1948)
* Walter S. Franklin (1948–1954)
* James M. Symes (1954–1960)
* Allen J. Greenough (1960–1968)

Chief Executive Officers of the Pennsylvania Railroad:
* James M. Symes (1960–1963)
* Stuart T. Saunders(1963–1968)

ee also

*List of Pennsylvania Railroad lines east of Pittsburgh
*List of Pennsylvania Railroad lines west of Pittsburgh
*Horseshoe Curve (Pennsylvania)
*List of Pennsylvania Railroad passenger trains
*List of Pennsylvania Railroad predecessor railroads
*New York, New Haven and Hartford Railroad — long time partner in run-through trains, also became part of Penn Central
*New York Central Railroad — long time adversary, eventual merger partner
*Penn Central Transportation — successor to the PRR and NYC in 1968
*Conrail - successor to Penn Central from 1976
*Pennsylvania Lines LLC - Conrail subsidiary that owned ex-PRR trackage and PRR reporting mark
*Norfolk Southern Railway — successor to Conrail in former PRR territory
*Pennsylvania Company, holding company incorporated in 1870 to own and operate much of the Lines West of Pittsburgh
*Pennsylvania Station, the name for several major stations
*Monopoly (game) - One of the railroads in the Atlantic City themed version of the game is the PRR.

References

*Atterbury-Bakalar Air Museum (2000), " [http://www.atterburybakalarairmuseum.org/general_atterbury.htm General Atterbury] ". Retrieved February 21 2005.
*Rensselaer Polytechnic Institute (2005), " [http://www.rpi.edu/about/hof/cassatt.html RPI: Alumni hall of fame: Alexander J. Cassatt] ". Retrieved February 22 2005.
*President and Fellows of Harvard College (2004), " [http://www.hbs.edu/leadership/database/leaders/154/ 20th century great American business leaders — Martin W. Clement] ". Retrieved February 23 2005.
*Thomas, William G. " [http://www.southernspaces.org/contents/2007/thomas/1a.htm The Countryside Transformed: The Eastern Shore of Virginia, the Pennsylvania Railroad and the Creation of the Modern Landscape] " "Southern Spaces" July 31, 2007.
*White, John H., Jr. (Spring (season) 1986), America's most noteworthy railroaders, "Railroad History", Railway and Locomotive Historical Society, 154, pp. 9–15.
*Pennsylvania Railroad, by Edvin Alexander 1947 (published by Bonanza books)

External links

* [http://www.prrths.com/ Pennsylvania Railroad Technical and Historical Society]
* [http://www.rrmuseumpa.org/ Railroad Museum of Pennsylvania Strasburg, Pennsylvania]
* [http://www.prrths.com/PRR_hagley_intro.htm PRR Chronology — in depth]
* [http://broadway.pennsyrr.com/Rail/Prr/Corphist/ PRR Corporate History]
* [http://www.pennsyrr.com/ PennsyRR.com] — comprehensive PRR facts and history site, comprising multiple individual websites.
* [http://prr.railfan.net/ prr.railfan.net] — contains a lot of PRR information, including equipment diagrams, freight car info.
* http://www.nps.gov/history/history/online_books/railroad/shst.htm
* [http://www.gutenberg.org/files/17302/17302-h/17302-h.htm The New York tunnel extension of the Pennsylvania Railroad] Transactions of the American Society of Civil Engineers, vol. LXVIII, Sept. 1910, by B.F. Cresson, Jr, from Project Gutenberg
*Orr, John W. " [http://www.psupress.psu.edu/books/titles/0-271-02056-3.html Set Up Running: The Life of a Pennsylvania Railroad Engineman, 1904–1949] ", Penn State Press, 2001 ISBN 0-271-02056-3
* [http://www.trainweb.org/railpix/prr-gg1-1.html Pennsylvania Railroad GG-1 p. 1 of 2: Stan's Railpix]


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Pennsylvania Railroad — Годы работы: с 1846 Страна …   Википедия

  • Pennsylvania Railroad — Logo der PRR Die Pennsylvania Railroad (PRR) war eine US amerikanische Eisenbahngesellschaft mit Sitz in Philadelphia. Sie wurde 1846 gegründet und existierte bis zur Fusion mit der New York Central Railroad im Jahre 1968. Ihr etwa 10.000 Meilen… …   Deutsch Wikipedia

  • Pennsylvania Railroad — Le Pennsylvania Railroad (PRR) est une ancienne compagnie de chemin de fer américaine créée en 1846 et disparue en 1968 du fait de sa fusion avec la société Penn Central Transportation. Connue aux États Unis sous le diminutif de… …   Wikipédia en Français

  • Pennsylvania Railroad, Connecting Railway Bridge — from the southeast in 1999. Other name(s) Pennsylvania Railroad, New York Division, Bridge No. 69 …   Wikipedia

  • Pennsylvania Railroad Station — oder Pennsylvania Railroad Passenger Station bezeichnet: California Pennsylvania Railroad Passenger Station Hobart Pennsylvania Railroad Station Mayville Pennsylvania Railroad Station Philadelphia Pennsylvania Railroad Station, siehe 30th Street… …   Deutsch Wikipedia

  • Pennsylvania Railroad Bridge — can refer to several bridges:*Pennsylvania Railroad Bridge (Columbia, Pennsylvania) *Pennsylvania Railroad Bridge (Pittsburgh, Pennsylvania) *Pennsylvania Railroad Bridge (Trenton, New Jersey) over the Delaware River *14th Street Bridge (Ohio… …   Wikipedia

  • Pennsylvania Railroad Bridge — bezeichnet: Trenton Pennsylvania Railroad Bridge über den Delaware River Pittsburgh Pennsylvania Railroad Bridge Diese Seite ist eine Begriffsklärung zur Unterscheidung mehrerer mit demselben Wort bezeichneter Begriffe …   Deutsch Wikipedia

  • Pennsylvania Railroad Bridge (Columbia, Pennsylvania) — Infobox Bridge bridge name= Pennsylvania Railroad Bridge caption= official name= also known as=Columbia Wrightsville Bridge carries= railroad tracks and two lane automobile roadway crosses= Susquehanna River locale= York County, Pennsylvania and… …   Wikipedia

  • Pennsylvania Railroad System — Logo der PRR Die Pennsylvania Railroad (PRR) war eine US amerikanische Eisenbahngesellschaft mit Sitz in Philadelphia. Sie wurde 1846 gegründet und existierte bis zur Fusion mit der New York Central Railroad im Jahre 1968. Ihr etwa 10.000 Meilen… …   Deutsch Wikipedia

  • Pennsylvania Railroad Co. — Former U.S. railroad. It was chartered in 1846 by the Pennsylvania legislature to build a line between Harrisburg and Pittsburgh, and its passenger service began two years later. By purchasing the Pittsburgh, Fort Wayne and Chicago Railway in… …   Universalium

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”