Atomic hydrogen welding

Atomic hydrogen welding

Atomic hydrogen welding (AHW) is an arc welding process that uses an arc between two metal tungsten electrodes in a shielding atmosphere of hydrogen. The process was invented by Irving Langmuir in the course of his studies of atomic hydrogen. The electric arc efficiently breaks up the hydrogen molecules, which later recombine with tremendous release of heat, reaching temperatures from 3400 to 4000 °C. An acetylene torch merely reaches 3300 °C. This is the third hottest flame after cyanogen at 4525 °C and dicyanoacetylene at 4987 °C. This device may be called an atomic hydrogen torch, nascent hydrogen torch or Langmuir torch. The process was also known as Arc-Atom welding.

The heat produced by this torch is sufficient to melt and weld tungsten (3422 °C), the most refractory metal. The presence of hydrogen acts as a gas shield and protects metals from contamination by carbon, nitrogen, or oxygen, which can severely damage the properties of many metals. It eliminates the need of flux for this purpose.

The arc is maintained independently of the workpiece or parts being welded. The hydrogen gas is normally diatomic (H2), but where the temperatures are over 600 °C (1100 °F) near the arc, the hydrogen breaks down into its atomic form, simultaneously absorbing a large amount of heat from the arc. When the hydrogen strikes a relatively cold surface (i.e., the weld zone), it recombines into its diatomic form and rapidly releases the stored heat. The energy in AHW can be varied easily by changing the distance between the arc stream and the workpiece surface. This process is being replaced by shielded metal-arc welding, mainly because of the availability of inexpensive inert gases.

In atomic hydrogen welding, filler metal may or may not be used. In this process, the arc is maintained entirely independent of the work or parts being welded. The work is a part of the electrical circuit only to the extent that a portion of the arc comes in contact with the work, at which time a voltage exists between the work and each electrode.

References

* Norton science encyclopedia 1st and 6th edition copyright 1921-1950 and 1976
* Van Nostrand's Encyclopedia of Science (Pg. 1311)
* Welding Handbook Vol. 2 Library of Congress number 90-085465 copyright 1991 by American Welding Society
* Kalpkjian, Serope and Steven R. Schmid. "Manufacturing Engineering and Technology" textbook Fifth edition. Upper Saddle River: Pearson Education, Inc., 2006
* Cite web
title = Atomic Hydrogen Welding
work = Specialty Welds
accessdate = 2008-01-26
url = http://www.specialwelds.com/underwater-welding/atomic-hydrogen-welding.htm
* Cite encyclopedia
title = Atomic - Hydrogen Welding
encyclopedia = Odhams Practical & Technical Encyclopaedia
accessdate = 2008-01-26
date = 1947
url = http://www.lateralscience.co.uk/AtomicH/AHW.html
* Cite web
title = Atomic Hydrogen Blowtorch
work = Lateral Science
accessdate = 2008-01-26
url = http://www.lateralscience.co.uk/AtomicH/atomicH.html


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Atomic hydrogen welding — Atomic hydrogen welding. См. Атомно водородная сварка. (Источник: «Металлы и сплавы. Справочник.» Под редакцией Ю.П. Солнцева; НПО Профессионал , НПО Мир и семья ; Санкт Петербург, 2003 г.) …   Словарь металлургических терминов

  • atomic hydrogen welding — noun : arc welding that utilizes an alternating current arc between two metal electrodes to dissociate hydrogen from a surrounding stream so that when the hydrogen atoms recombine into molecules at the surface of the part being welded they supply …   Useful english dictionary

  • atomic arc welding — Welding using heat created by hydrogen atoms, created by an electric arc recombining to form hydrogen molecules. The heat is used to weld delicate joints, and the hydrogen forms a shield over the weld …   Dictionary of automotive terms

  • Welding — is a fabrication process that joins materials, usually metals or thermoplastics, by causing coalescence. This is often done by melting the workpieces and adding a filler material to form a pool of molten material (the weld puddle ) that cools to… …   Wikipedia

  • Hydrogen technologies — are technologies that relate to the production and use of hydrogen. Hydrogen technologies are applicable for many uses.Some hydrogen technologies are carbon neutral and could have a role in preventing climate change and a possible future hydrogen …   Wikipedia

  • Hydrogen — This article is about the chemistry of hydrogen. For the physics of atomic hydrogen, see Hydrogen atom. For other meanings, see Hydrogen (disambiguation). ← hydrogen → helium …   Wikipedia

  • Hydrogen damage — is the generic name given to a large number of metal degradation processes due to interaction with hydrogen.Hydrogen is present practically everywhere, in the atmosphere, several kilometres above the earth and inside the earth. Engineering… …   Wikipedia

  • welding — the process of joining together two pieces of metal so that bonding accompanied by appreciable interatomic penetration takes place at their original boundary surfaces. The boundaries more or less disappear at the weld, and integrating crystals… …   Mechanics glossary

  • Hydrogen embrittlement — (or hydrogen grooving) is the process by which various metals, most importantly high strength steel, become brittle and crack following exposure to hydrogen. Hydrogen cracking can pose an engineering problem especially in the context of a… …   Wikipedia

  • Arc welding — uses a welding power supply to create an electric arc between an electrode and the base material to melt the metals at the welding point. They can use either direct (DC) or alternating (AC) current, and consumable or non consumable electrodes.… …   Wikipedia

Share the article and excerpts

Direct link
… Do a right-click on the link above
and select “Copy Link”