Arthur Sack A.S.6

Arthur Sack A.S.6

The Arthur Sack A.S.6 was an experimental German aircraft tested during World War II with an unusual circular planform.

Development

Arthur Sack was a farmer and aero-model construction enthusiast. In June 1939 in Leipzig-Mockau he attended the First National Contest of Aero-models with Combustion Engines, where he hand-launched his first aero model with a circular wing, the A.S.1. It possessed rather poor flying qualities. Arthur Sack's aeromodel measured 125 cm and weighed just 4.5 kg, powered by a Kratmo-30 motor of 0.65 V and 4,500 RPM with a propeller measuring 600 mm in diameter. His "circular aircraft" was unable to lift off the ground by itself, and finally Sack had to throw it into the air in desperation. After this " assisted takeoff", the model managed to perform 100 meters of stable flight, just barely reaching the finish line. However, the odd-shaped model instantly caught the attention of Air Ministry's General Ernst Udet who was fascinated by the circular shape and gave Sack permission to proceed with his research with official backing.

Sack immediately began construction of A.S. aero models of increasing size up to the A.S.5 which was by far the largest flying model. With a wingspan of 125 cm, length of 159 cm, and height of 65.3 cm the two-bladed propeller model took to the air and proved the soundness of the basic design. From this point on Sack was determined to build a manned machine that would become the Arthur Sack A.S.6 V-1.

The aircraft was built in Leipzig starting in January 1944 in the workshops of the Mitteldeutsche Motorwerke company. Assembly and final tuning were performed at the Flugplatz-Werkstatt workshop at Brandis air base during the same month. The basic structure was made of plywood while the cockpit, pilot seat, and landing gear all came from an old wrecked Bf 109B. The engine was taken from a Bf 108 "Taifun", an Argus As 10C-3 of 240 hp working on an old wooden two-blade propeller. The empennage was based on the Klemm Kl 35.

Flight tests

In February 1944, the A.S.6 V-1 taxi test started, piloted by Baltabol from the ATG/DFW of Leipzig. The first test proved that the rudder was not strong enough and some structural damage resulted from the test.

During the second test five separate take-off runs were attempted from the 1,200 meter landing strip at Brandis. It was soon discovered that the control surfaces failed to function properly because they were positioned in the vacuum area produced by the circular wing while taxiing. The right leg of the landing gear was damaged on the last run. Due to war restrictions more powerful engines than the low-hp Argus were not available so the incidence angle was increased. The test pilot at this point proposed moving the landing gear back 20 cm, but due to structural reasons that could not be overcome, the modification was deemed too risky. Instead, brakes were installed from a Ju 88, 70 kg of ballast was added ahead of wing spar No.3 and the tail surfaces were increased by adding 20 mm of corrugated plates.

The third test flight was performed over the 700 meter strip at Brandis on April 16, 1944. There was no wind and the plane rolled 500 meters without lifting its tail. No aerodynamic control of the empennages was achieved. The plane made a brief hop but could not get into the air.

During the fourth flight test the jump was a bit longer; however, the plane banked to the left because of torsion generated by the propeller, this being very difficult to balance in a small wingspan aircraft. After this Baltabol lost all hope and recommended the installation of a proper Daimler-Benz engine from a current Me Bf 109 and a complete study of the basic design in an aerodynamic wind tunnel. Sack went on trying to solve the problem by himself in the traditional manner until the end of the war.

Luftwaffe flight attempt

The A.S.6V-1 would have sat for the duration of the war had it not been for the arrival of Gruppe I/JG 400 at Brandis in the summer of 1944. These were the confident new Me 163 Komet pilots who had plenty of experience with difficult take-offs and landings with short wingspan aircraft. So, it was inevitable that one of them, Oberleutnant Franz Roszle, made an attempt to fly what the Gruppe named the "Bierdeckel" ("Beermat").

His attempt, like Baltabol before him, ended with a short hop and collapsed landing gear. The "Komet" pilot made the same suggestion to Sack about testing the design in a wind tunnel and then turning the aircraft over to Messerschmitt for proper redesign with components of the latest Me Bf 109 fighter, including armaments. Sack refused to listen or ask any favors from the Reich Air Ministry.

Further design work/Messerschmitt 600 proposal

Messerschmitt got word of the A.S.6V-1 and actually proposed that a new A.S.7V-1 should be re-designated as Me 600 (the unofficial double zero designation intended to denote a round aircraft). The proposed Me 600 would have enlarged the circular wing considerably and featured a complete fuselage with the latest DB 605 ASCM/DCM of 2,000 hp with MW (Methanol-Water) injection and a four-bladed propeller, repositioned gear, improved control surfaces, redesigned tail unit, Galland hood, and six MK 108 cannon buried in the reinforced circular wing. With wind tunnel data corrections and Messerschmitt construction the projected Me 600 would have been a formidable 500 mph fighter. The odd circular wing already had the "Komet" pilots making suggestions for a new nickname. They would call any Sack aircraft that made it into combat the "Bussard" ("Hawk").

Fate

Sack was never given the opportunity to redesign the A.S.6. In April 1945 it was destroyed to hide its existence from US Army troops advancing to Brandis. No trace of the aircraft remained, as its wooden construction was used for fuel.

pecifications (A.S.6)

aircraft specifications
plane or copter?= plane
jet or prop?= prop
ref=
crew= one pilot
capacity=
length main= 6.4 m
length alt=21 ft 0 in
span main= 5 m
span alt= 16 ft 5 in
height main= 2.56 m
height alt=8 ft 5 in
area main= 19.62 m²
area alt= 211.11 ft²
airfoil=
empty weight main=
empty weight alt=
loaded weight main=
loaded weight alt=
useful load main=
useful load alt=
max takeoff weight main= 900 kg
max takeoff weight alt= 1,980 lb
more general=
* Propeller: Wooden, 2-bladed, of 2.5 m (8 ft 2 in) diameter

engine (prop)=Argus As 10C-3
type of prop=air-cooled inverted V8 engine
number of props=1
power main= 179 kW
power alt= 240 hp
power original=

max speed main=
max speed alt=
cruise speed main=
cruise speed alt=
never exceed speed main=
never exceed speed alt=
stall speed main=
stall speed alt=
range main=
range alt=
ceiling main=
ceiling alt=
climb rate main=
climb rate alt=
loading main= 45.87 kg/m²
loading alt= 9.38 lb/ft²
power/mass main=
power/mass alt=
more performance=
armament=
* None
avionics=

References

* [http://www.luft46.com/misc/sackas6.html luft46 site]
* [http://www.unrealaircraft.com/wings/german_discs.php unrealaircraft.com]
* [http://www.geocities.com/INEXPLICATA2000/issue1/1.htm An Aeronautical History of Flying Saucers]
* [http://www.bibliotecapleyades.net/esp_ufoaleman_1.htm Disc Aircraft of the Third Reich]

External links

* [http://www.lonlygunmen.de/ufo/weapons/sack/as6.html lonlygunmen.de] de icon
* [http://www.kheichhorn.de/html/body_as_6.html Das Rundflugzeug des Arthur Sack] de icon
* [http://www.luftarchiv.info/flugscheiben/sack.htm LuftArchiv.de] de icon

ee also

aircontent
related=

similar aircraft=

sequence=A.S.1 - A.S.2 - A.S.3 - A.S.4 - A.S.5 - A.S.6

lists=
* List of military aircraft of Germany
* List of experimental aircraft
* List of WW2 Luftwaffe aircraft prototype projects
see also=


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Arthur Sack — (* 1900; † 1964) war ein Landwirt, Autodidakt und Hobbyerfinder aus Machern, der versuchte, Flugscheiben zu entwickeln. Es gelang ihm, ein flugfähiges Modell zu entwickeln, das er 1939 in Leipzig Mockau vorstellte. Dieser erste Prototyp, genannt… …   Deutsch Wikipedia

  • Sack AS-6 — V1 Beschreibung Status Versuchsflugzeug Besatzung 1 Abmessungen Länge 6.4 m Spannweite 5.0 m Höhe 2.56 m Tragfläche 19.62 m² Gewich …   Deutsch Wikipedia

  • Sack (Begriffsklärung) — Sack bezeichnet: Sack, ein Transport und Aufbewahrungsbehältnis Sack (American Football), Spielvorgang im American Football, bei dem der balltragende Quarterback getackelt wird Sack (Einheit), eine Maßeinheit SACK (Selective Acknowledgment), ein… …   Deutsch Wikipedia

  • Arthur Schopenhauer — Arthur Schopenhauer, 1859 Arthur Schopenhauer (* 22. Februar 1788 in Danzig; † 21. September 1860 in Frankfurt am Main) war ein deutscher Philosoph, Autor und Hochschullehrer. Er war der Sohn der Schriftstellerin und Salonière Johanna… …   Deutsch Wikipedia

  • Arthur Kurzweil — (born in 1951 in New York City) is an American author, educator, editor, writer, publisher, and magician.cite news last = Rubin first = Debra title = Educator brings a magic touch to event on faith and spirituality publisher = New Jersey Jewish… …   Wikipedia

  • Arthur Nebe — Born 13 …   Wikipedia

  • Arthur Nebe — Arthur Nebe, Aufnahme aus dem Bundesarchiv Arthur Nebe (* 13. November 1894 in Berlin; † 3. März 1945 in Berlin Plötzensee)[1] war seit 1937 als …   Deutsch Wikipedia

  • Arthur Everard — graduated with a BA in psychology from Victoria University of Wellington and worked for 17 years as a writer, editor and director at the National Film Unit. He directed films such as Margan’s Musical Move (1971) in which he captured the drama of… …   Wikipedia

  • Arthur Schopenhauer — Infobox Philosopher region = Western Philosophy era = 19th century philosophy color = #B0C4DE | image caption = Arthur Schopenhauer | name = Arthur Schopenhauer birth = February 22, 1788 (Danzig, Germanic Prussia) death = Death date and… …   Wikipedia

  • Arthur Jones (football américain) — Pour les articles homonymes, voir Arthur Jones et Jones. Arthur Jones Données générales Nom complet Arthur Willis Jones III Nationalité …   Wikipédia en Français

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”