Moving parts

Moving parts
some of the moving parts of an automobile engine

The moving parts of a machine are those parts of it that move. Machines comprise both moving (or movable) and fixed parts. The moving parts have controlled and constrained motions.[1][2]

Moving parts do not include any moving fluids, such as fuel, coolant or hydraulic fluid.[citation needed] Moving parts also do not include any mechanical locks, switches, nuts and bolts, screw caps for bottles (the cap used to cover a water bottle when not in use) etc.

Contents

Mechanical efficiency and wear

The amount of moving parts in a machine is a factor in its mechanical efficiency. The greater the number of moving parts, the greater the amount of energy lost to heat by friction between those parts.[3] In a modern automobile engine, for example, roughly 7% of the total power obtained from burning the engine's fuel is lost to friction between the engine's moving parts.[4]

Conversely, the fewer the number of moving parts, the greater the efficiency. Machines with no moving parts at all can be very efficient. An electrical transformer, for example, has no moving parts, and its mechanical efficiency is generally above the 90% mark. (The remaining power losses in a transformer are from other causes, including loss to electrical resistance in the copper windings and hysteresis loss and eddy current loss in the iron core.)[5]

Two means are used for overcoming the efficiency losses caused by friction between moving parts. First, moving parts are lubricated. Second, the moving parts of a machine are designed so that they have a small amount of contact with one another. The latter, in its turn, comprises two approaches. A machine can be reduced in size, thereby quite simply reducing the areas of the moving parts that rub against one another; and the designs of the individual components can be modified, changing their shapes and structures to reduce or avoid contact with one another.[4]

Lubrication also reduces wear, as does the use of suitable materials. As moving parts wear out, this can affect the precision of the machine. Designers thus have to design moving parts with this factor in mind, ensuring that if precision over the lifetime of the machine is paramount, that wear is accounted for and, if possible, minimized. (A simple example of this is the design of a simple single-wheel wheelbarrow. A design where the axle is fixed to the barrow arms and the wheel rotates around it is prone to wear which quickly causes wobble, whereas a rotating axle that is attached to the wheel and that rotates upon bearings in the arms does not start to wobble as the axle wears through the arms.)[6]

The scientific and engineering discipline that deals with the lubrication, friction, and wear of moving parts is tribology, an interdisciplinary field that encompasses materials science, mechanical engineering, chemistry, and mechanics.[7]

Failure

As mentioned, wear is a concern for moving parts in a machine.[8] Other concerns that lead to failure include corrosion,[8] erosion,[8] thermal stress and heat generation,[8] vibration,[8] fatigue loading,[8] and cavitation.

Fatigue is related to large inertial forces, and is affected by the type of motion that a moving part has. A moving part that has a uniform rotation motion is subject to less fatigue than a moving part that oscillates back and forth. Vibration leads to failure when the forcing frequency of the machine's operation hits a resonant frequency of one or more moving parts, such as rotating shafts. Designers avoid this by calculating the natural frequencies of the parts at design time, and altering the parts to limit or eliminate such resonance. Yet further factors that can lead to failure of moving parts include failures in the cooling and lubrication systems of a machine.[8]

One final, particular, factor related to failure of moving parts is kinetic energy. The sudden release of the kinetic energy of the moving parts of a machine causes overstress failures if a moving part is impeded in its motion by a foreign object, such as stone caught on the blades of a fan or propellor, or even the proverbial "spanner/monkey wrench in the works".[8] (See foreign object damage for further discussion of this.)

Kinetic energy of the moving parts of a machine

The kinetic energy of a machine is the sum of the kinetic energies of its individual moving parts. A machine with moving parts can, mathematically, be treated as a connected system of bodies, whose kinetic energies are simply summed. The individual kinetic energies are determined from the kinetic energies of the moving parts' translations and rotations about their axes.[9]

The kinetic energy of rotation of the moving parts can be determined by noting that every such system of moving parts can be reduced to a collection of connected bodies rotating about an instantaneous axis, which form either a ring or a portion of an ideal ring, of radius a rotating at n revolutions per second. This ideal ring is known as the equivalent fly wheel, whose radius is the radius of gyration. The integral of the squares of the radii all the portions of the ring with respect to their mass \int a^2 dm, also expressible if the ring is modelled as a collection of discrete particles as the sum of the products of those mass and the squares of their radii \sum_{k=0}^n m_k \times a_k^2 is the ring's moment of inertia, denoted I. The rotational kinetic energy of the whole system of moving parts is \frac{1}{2} I \omega^2, where ω is the angular velocity of the moving parts about the same axis as the moment of inertia.[9][10]

The kinetic energy of translation of the moving parts is \frac{1}{2} m v^2, where m is the total mass and v is the magnitude of the velocity. This gives the formula for the total kinetic energy of the moving parts of a machine as \frac{1}{2} I \omega^2 + \frac{1}{2} m v^2.[9][10]

Representing moving parts in engineering diagrams

This engineering diagram (illustrating the principle in kinematic design that using incorrect types/numbers of mechanical linkages can cause fixed parts to wobble[6]) shows the motion of the wobbling parts with a solid outline of the moving part in one position at one extremity of its motion and a phantom line outline of the part in the position at the other extremity.

In technical drawing, moving parts are, conventionally, designated by drawing the solid outline of the part in its main or initial position, with an added outline of the part in a secondary, moved, position drawn with a phantom line (a line comprising "dot-dot-dash" sequences of two short and one long line segments) outline.[11][12][13] These conventions are enshrined in several standards from the American National Standards Institute and the American Society of Mechanical Engineers, including ASME Y14.2M published in 1979.[14]

In recent decades, the use of animation has become more practical and widespread in technical and engineering diagrams for the illustration of the motions of moving parts. Animation represents moving parts more clearly and enables them and their motions to be more readily visualized.[15] Furthermore, computer aided design tools allow the motions of moving parts to be simulated, allowing machine designers to determine, for example, whether the moving parts in a given design would obstruct one another's motion or collide by simple visual inspection of the (animated) computer model rather than by the designer performing a numerical analysis directly.[16][17]

See also

References

  1. ^ V B Bhandari (2001). Introduction to machine design. Tata McGraw-Hill. pp. 1. ISBN 0070434492. 
  2. ^ Thomas Minchin Goodeve. The Elements of Mechanism (Read Books 2007 reprint ed.). London: Longman, Green, Longman, and Roberts. pp. 1. ISBN 1406700495. 
  3. ^ Alden J. Balmer (2008). Doc Fizzix Mousetrap Racers: The Complete Builder's Manual. Fox Chapel Publishing. pp. 32. ISBN 156523359X. 
  4. ^ a b Steven T. Moeller (2002). Energy efficiency: issues and trends. Nova Publishers. pp. 57. ISBN 1590332016. 
  5. ^ Trevor Linsley (2008). Advanced Electrical Installation Work (5th ed.). Newnes. pp. 216. ISBN 0750687525. 
  6. ^ a b Edgar Bright Wilson (1952). An introduction to scientific research. Dover books explaining science (1991 reprint ed.). Courier Dover Publications. pp. 104–105,108. ISBN 0486665453. 
  7. ^ R. J. Wakelin (1974). "Tribology: The Friction, Lubrication, and Wear of Moving Parts". In Robert A. Huggins. Annual review of materials science. 4. Annual Reviews, inc.. pp. 221. ISBN 0824317041. 
  8. ^ a b c d e f g h M. T. Todinov (2007). Risk-based reliability analysis and generic principles for risk reduction. Elsevier. pp. 208–209. ISBN 0080447287. 
  9. ^ a b c Russell C. Hibbeler (2009). Engineering Mechanics: Dynamics (12th ed.). Prentice Hall. pp. 457–458. ISBN 0136077919. 
  10. ^ a b James Henry Cotterill (1884). Applied Mechanics. An Elementary General Introduction to the Theory of Structures and Machines. With Diagrams, Illustrations, and Examples (Adegi Graphics LLC reprint ed.). London: Macmillan & Co.. pp. 212–215. ISBN 1421257017. 
  11. ^ Jack Lo and David Pressman (2007). How to Make Patent Drawings: A Patent It Yourself Companion (5th ed.). Nolo. pp. 226. ISBN 1413306535. 
  12. ^ David A. Madsen (2001). Engineering drawing and design. Delmar drafting series (3rd ed.). Cengage Learning. pp. 48. ISBN 0766816346. 
  13. ^ Cecil Howard Jensen and Jay D. Helsel (1985). Fundamentals of engineering drawing (2nd ed.). Gregg Division, McGraw-Hill. pp. 28. ISBN 0070325340. 
  14. ^ Paul H. Wright (2002). Introduction to engineering. Wiley Desktop Editions Series (3rd ed.). John Wiley and Sons. pp. 155–156,171. ISBN 047105920X. 
  15. ^ David L. Goetsch, William Chalk, John A. Nelson (1999). Technical drawing. Delmar technical graphics series (4th ed.). Cengage Learning. pp. 452, 456. ISBN 076680531X. 
  16. ^ Peter P. Comninos (1989). "Computer Graphics and Animation for Interior and Industrial Designers". In John Lansdown and Rae A. Earnshaw. Computers in art, design, and animation. Springer. pp. 216–217. ISBN 0387968962. 
  17. ^ Philip Steadman (1989). "Computer Assistance to the Design Process". In John Lansdown and Rae A. Earnshaw. Computers in art, design, and animation. Springer. pp. 158. ISBN 0387968962. 

Further reading


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Moving Parts — The Moving Parts was a late 1970s Boston based rock music band. Though short lived and little noticed during their career, the band s members went on to form parts of more influential bands Birdsongs of the Mesozoic and Mission of Burma. The band …   Wikipedia

  • Fewer Moving Parts — Infobox Album | Name = Fewer Moving Parts Type = EP Artist = David Bazan Released = 13 June 2006 Recorded = 2005 2006 Genre = Indie rock Length = 34:18 Label = Eat My Flesh, Drink My Blood Barsuk Records Producer = David Bazan Reviews =… …   Wikipedia

  • moving part — UK US noun [countable] [singular moving part plural moving parts] a part of a machine that moves when the machine is working Thesaurus: parts of machines and machinerymeronym describing machines and pie …   Useful english dictionary

  • moving — adjective 1) moving parts a moving train Syn: in motion, operating, operational, working, going, on the move, active; movable, mobile Ant: fixed, stationary 2) …   Thesaurus of popular words

  • moving part — UK / US noun [countable] Word forms moving part : singular moving part plural moving parts a part of a machine that moves when the machine is working …   English dictionary

  • moving — [ˈmuːvɪŋ] adj 1) making you feel sad or sympathetic 2) a moving object is something that moves He was pushed from a moving train.[/ex] the moving parts of a machine[/ex] movingly adv …   Dictionary for writing and speaking English

  • moving unit — noun A unit of measurement in motion, such as moving crowd,or moving parts of a machine …   Wiktionary

  • moving part — noun (C) a part of a machine that moves when it is operating: Keep the moving parts well oiled …   Longman dictionary of contemporary English

  • Moving Picture Institute — Founder(s) Thor Halvorssen Founded 2005 Key people …   Wikipedia

  • Moving bed heat exchanger — Moving bed heat exchangers (also moving bed coolers) are stationary heat exchangers for bulk materials for continuous processes in chemical engineering. Contents 1 Construction 2 Function 3 Applications 4 Technical specifi …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”