Alkene

Alkene
A 3D model of ethylene, the simplest alkene.

In organic chemistry, an alkene, olefin, or olefine is an unsaturated chemical compound containing at least one carbon-to-carbon double bond.[1] The simplest acyclic alkenes, with only one double bond and no other functional groups, form an homologous series of hydrocarbons with the general formula CnH2n.[2]

The simplest alkene is ethylene (C2H4), which has the International Union of Pure and Applied Chemistry (IUPAC) name ethene. Alkenes are also called olefins (an archaic synonym, widely used in the petrochemical industry). For bridged alkenes, the Bredt's rule states that a double bond cannot be placed at the bridgehead of a bridged ring system, unless the rings are large enough. Aromatic compounds are often drawn as cyclic alkenes, but their structure and properties are different and they are not considered to be alkenes.[2]

Contents

Structure

Bonding

Ethylene (ethene), showing the pi bond in green.

Like single covalent bonds, double bonds can be described in terms of overlapping atomic orbitals, except that, unlike a single bond (which consists of a single sigma bond), a carbon-carbon double bond consists of one sigma bond and one pi bond. This double bond is stronger than a single covalent bond (611 kJ/mol for C=C vs. 347 kJ/mol for C—C)[1] and also shorter with an average bond length of 1.33 Angstroms (133 pm).

Each carbon of the double bond uses its three sp² hybrid orbitals to form sigma bonds to three atoms. The unhybridized 2p atomic orbitals, which lie perpendicular to the plane created by the axes of the three sp² hybrid orbitals, combine to form the pi bond. This bond lies outside the main C—C axis, with half of the bond on one side and half on the other.

Rotation about the carbon-carbon double bond is restricted because it involves breaking the pi bond, which requires a large amount of energy (264 kJ/mol in ethylene). As a consequence, substituted alkenes may exist as one of two isomers, called cis or trans isomers. More complex alkenes may be named using the E-Z notation, used to describe molecules having three or four different substituents (side groups). For example, of the isomers of butene, the two methyl groups of (Z)-but-2-ene (aka cis-2-butene) face the same side of the double bond, and in (E)-but2-ene (aka trans-2-butene) the methyl groups face the opposite side. These two isomers of butene are slightly different in their chemical and physical properties.

It is certainly not impossible to twist a double bond. In fact, a 90° twist requires an energy approximately equal to half the strength of a pi bond. The misalignment of the p orbitals is less than expected because pyramidalization takes place (See: pyramidal alkene). trans-Cyclooctene is a stable strained alkene and the orbital misalignment is only 19° with a dihedral angle of 137° (normal 120°) and a degree of pyramidalization of 18°. This explains the dipole moment of 0.8 D for this compound (cis-isomer 0.4 D) where a value of zero is expected.[3] The trans isomer of cycloheptene is only stable at low temperatures.

Shape

As predicted by the VSEPR model of electron pair repulsion, the molecular geometry of alkenes includes bond angles about each carbon in a double bond of about 120°. The angle may vary because of steric strain introduced by nonbonded interactions created by functional groups attached to the carbons of the double bond. For example, the C-C-C bond angle in propylene is 123.9°.

Physical properties

The physical properties of alkenes are comparable with those of alkanes. The main differences between the two are that the acidity levels of alkenes are much higher than the ones in alkanes. The physical state depends on molecular mass (gases from ethene to butene - liquids from pentene onwards). The simplest alkenes, ethene, propene and butene are gases. Linear alkenes of approximately five to sixteen carbons are liquids, and higher alkenes are waxy solids.

Reactions

Alkenes are relatively stable compounds, but are more reactive than alkanes due to the presence of a carbon-carbon pi-bond. It is also attributed to the presence of pi-electrons in the molecule. The majority of the reactions of alkenes involve the rupture of this pi bond, forming new single bonds.

Alkenes serve as a feedstock for the petrochemical industry because they can participate in a wide variety of reactions.

Addition reactions

Alkenes react in many addition reactions, which occur by opening up the double-bond. Most addition reactions to alkenes follow the mechanism of electrophilic addition. Examples of addition reactions are hydrohalogenation, halogenation, halohydrin formation, oxymercuration, hydroboration, dichlorocarbene addition, Simmons-Smith reaction, catalytic hydrogenation, epoxidation, radical polymerization and hydroxylation.

Electrophilic addition

Hydrogenation

Hydrogenation of alkenes produces the corresponding alkanes. The reaction is carried out under pressure at a temperature of 200 °C in the presence of a metallic catalyst. Common industrial catalysts are based on platinum, nickel or palladium. For laboratory syntheses, Raney nickel (an alloy of nickel and aluminium) is often employed. The simplest example of this reaction is the catalytic hydrogenation of ethylene to yield ethane:

CH2=CH2 + H2 → CH3-CH3

Halogenation

In electrophilic halogenation the addition of elemental bromine or chlorine to alkenes yields vicinal dibromo- and dichloroalkanes (1,2-dihalides or ethylene dihalides), respectively. The decoloration of a solution of bromine in water with dichloromethylene as catalyst is an analytical test for the presence of alkenes:

CH2=CH2 + Br2 → BrCH2-CH2Br

It is also used as a quantitive test of unsaturation, expressed as the bromine number of a single compound or mixture. The reaction works because the high electron density at the double bond causes a temporary shift of electrons in the Br-Br bond causing a temporary induced dipole. This makes the Br closest to the double bond slightly positive and therefore an electrophile.

Hydrohalogenation

Hydrohalogenation is the addition of hydrohalic acids such as HCl or HBr to alkenes to yield the corresponding haloalkanes.

CH3-CH=CH2 + HBr → CH3-CHBr-CH2-H

If the two carbon atoms at the double bond are linked to a different number of hydrogen atoms, the halogen is found preferentially at the carbon with fewer hydrogen substituents (Markovnikov's rule). But terminal olefin products don't yield by this method. For bromation an alternative method denominated Kharasch-Sosnovsky Reaction. is used for this purpose. It consists to add peroxides to hydrogen bromide or Copper bromide (II).

hydrohalogenation reaction mechanism

Halohydrin formation

Alkenes react with water and halogens to form halohydrins by an addition reaction. Markovnikov regiochemistry and anti stereochemistry occur.

CH2=CH2 + X2 + H2O → XCH2-CH2OH

Oxidation

Alkenes are oxidized with a large number of oxidizing agents. In the presence of oxygen, alkenes burn with a bright flame to produce carbon dioxide and water. Catalytic oxidation with oxygen or the reaction with percarboxylic acids yields epoxides. Reaction with ozone in ozonolysis leads to the breaking of the double bond, yielding two aldehydes or ketones. Reaction with concentrated, hot KMnO4 (or other oxidizing salts) in an acidic solution will yield ketones or carboxylic acids.

R1-CH=CH-R2 + O3 → R1-CHO + R2-CHO + H2O

This reaction can be used to determine the position of a double bond in an unknown alkene.

Oxymercuration

Hydration of alkenes via oxymercuration to produces alcohols. Reaction takes place on treatment of alkenes with strong acid as catalyst.

CH2=CH2 + H2O → CH3-CH2OH

Polymerization

Polymerization of alkenes is a reaction that yields polymers of high industrial value at great economy, such as the plastics polyethylene and polypropylene. Polymers from alkene monomers are referred to in a general way as polyolefins or in rare instances as polyalkenes. A polymer from alpha-olefins is called a polyalphaolefin (PAO). Polymerization can proceed via either a free-radical or an ionic mechanism, converting the double to a single bond and forming single bonds to join the other monomers. Polymerization of conjugated dienes such as buta-1,3-diene or isoprene (2-methylbuta-1,3-diene) results in largely 1,4-addition with possibly some 1,2-addition of the diene monomer to a growing polymer chain. For details, see "Polybutadiene".

Reaction overview

Reaction name Product Comment
Hydrogenation alkanes addition of hydrogen
Hydroalkenylation alkenes hydrometalation / insertion / beta elimination by metal catalyst
Halogen addition reaction 1,2-dihalide electrophilic addition of halogens
Hydrohalogenation (Markovnikov) haloalkanes addition of hydrohalic acids
Kharasch-Sosnovsky Reaction (Antimarkovnikov Hydrohalogenation) haloalkanes free radicals mediated addition of hydrohalic acids
Hydroamination amines addition of N-H bond across C-C double bond
Hydroformylation aldehydes industrial process, addition of CO and H2
Sharpless bishydroxylation diols oxidation, reagent: osmium tetroxide, chiral ligand
Woodward cis-hydroxylation diols oxidation, reagents: iodine, silver acetate
ozonolysis aldehydes or ketones reagent: ozone
Olefin metathesis alkenes two alkenes rearrange to form two new alkenes
Diels-Alder reaction cyclohexenes cycloaddition with a diene
Pauson-Khand reaction cyclopentenones cycloaddition with an alkyne and CO
Hydroboration–oxidation alcohols reagents: borane, then a peroxide
oxymercuration-reduction alcohols electrophilic addition of mercuric acetate, then reduction
Prins reaction 1,3-diols electrophilic addition with aldehyde or ketone
Paterno–Büchi reaction oxetanes photochemical reaction with aldehyde or ketone
Epoxidation epoxide electrophilic addition of a peroxide
Cyclopropanation cyclopropanes addition of carbenes or carbenoids
Hydroacylation ketones oxidative addition / reductive elimination by metal catalyst

Synthesis

Industrial methods

Alkenes are produced by hydrocarbon cracking. Raw materials are mostly natural gas condensate components (principally ethane and propane) in the US and Mideast and naphtha in Europe and Asia. Alkanes are broken apart at high temperatures, often in the presence of a zeolite catalyst, to produce a mixture of primarily aliphatic alkenes and lower molecular weight alkanes. The mixture is feedstock dependent and separated by fractional distillation. This is mainly used for the manufacture of small alkenes (up to six carbons).[1]

Cracking of n-octane to give pentane + propene

Related to this is catalytic dehydrogenation, where an alkane loses hydrogen at high temperatures to produce a corresponding alkene.[1] This is the reverse of the catalytic hydrogenation of alkenes.

Dehydrogenation of butane to give butadiene and isomers of butene

Both of these processes are endothermic, but they are driven towards the alkene at high temperatures by entropy (the TΔS portion of the equation ΔG = ΔH – TΔS dominates for high T).

Catalytic synthesis of higher α-alkenes (of the type RCH=CH2) can also be achieved by a reaction of ethylene with the organometallic compound triethylaluminium in the presence of nickel, cobalt, or platinum.

Elimination reactions

One of the principal methods for alkene synthesis in the laboratory is the elimination of alkyl halides, alcohols, and similar compounds. Most common is the β-elimination via the E2 or E1 mechanism,[4] but α-eliminations are also known.

The E2 mechanism provides a more reliable β-elimination method than E1 for most alkene syntheses. Most E2 eliminations start with an alkyl halide or alkyl sulfonate ester (such as a tosylate or triflate). When an alkyl halide is used, the reaction is called a dehydrohalogenation. For unsymmetrical products, the more substituted alkenes (those with fewer hydrogens attached to the C=C) tend to predominate (see Zaitsev's rule). Two common methods of elimination reactions are dehydrohalogenation of alkyl halides and dehydration of alcohols. A typical example is shown below; note that if possible, the H is anti to the leaving group, even though this leads to the less stable Z-isomer.[5]

An example of an E2 Elimination

Alkenes can be synthesized from alcohols via dehydration, in which case water is lost via the E1 mechanism. For example, the dehydration of ethanol produces ethene:

CH3CH2OH + H2SO4H2C=CH2 + H3O+ + HSO4

An alcohol may also be converted to a better leaving group (e.g., xanthate), so as to allow a milder syn-elimination such as the Chugaev elimination and the Grieco elimination. Related reactions include eliminations by β-haloethers (the Boord olefin synthesis) and esters (ester pyrolysis).

Alkenes can be prepared indirectly from alkyl amines. The amine or ammonia is not a suitable leaving group, so the amine is first either alkylated (as in the Hofmann elimination) or oxidized to an amine oxide (the Cope reaction) to render a smooth elimination possible. Hofmann elimination is unusual in that the less substituted (non-Saytseff) alkene is usually the major product. The Cope reaction is a syn-elimination that occurs at or below 150 °C, for example:[6]

Synthesis of cyclooctene via Cope elimination

Alkenes are generated from α-halo sulfones in the Ramberg-Bäcklund reaction, via a three-membered ring sulfone intermediate.

Synthesis from carbonyl compounds

Another important method for alkene synthesis involves construction of a new carbon-carbon double bond by coupling of a carbonyl compound (such as an aldehyde or ketone) to a carbanion equivalent. Such reactions are sometimes called olefinations. The most well-known of these methods is the Wittig reaction, but other related methods are known.

The Wittig reaction involves reaction of an aldehyde or ketone with a Wittig reagent (or phosphorane) of the type Ph3P=CHR to produce an alkene and Ph3P=O. The Wittig reagent is itself prepared easily from triphenylphosphine and an alkyl halide. The reaction is quite general and many functional groups are tolerated, even esters, as in this example:[7]

A typical example of the Wittig reaction

Related to the Wittig reaction is the Peterson olefination. This uses a less accessible silicon-based reagent in place of the phosphorane, but it allows for the selection of E or Z products. If an E-product is desired, another alternative is the Julia olefination, which uses the carbanion generated from a phenyl sulfone. The Takai olefination based on an organochromium intermediate also delivers E-products. A titanium compound, Tebbe's reagent, is useful for the synthesis of methylene compounds; in this case, even esters and amides react.

A pair of carbonyl compounds can also be reductively coupled together (with reduction) to generate an alkene. Symmetrical alkenes can be prepared from a single aldehyde or ketone coupling with itself, using Ti metal reduction (the McMurry reaction). If two different ketones are to be coupled, a more complex, indirect method such as the Barton-Kellogg reaction may be used.

A single ketone can also be converted to the corresponding alkene via its tosylhydrazone, using sodium methoxide (the Bamford-Stevens reaction) or an alkyllithium (the Shapiro reaction).

Synthesis from alkenes: Olefin metathesis and hydrovinylation

Alkenes can be prepared by exchange with other alkenes, in a reaction known as olefin metathesis. Frequently, loss of ethene gas is used to drive the reaction towards a desired product. In many cases, a mixture of geometric isomers is obtained, but the reaction tolerates many functional groups. The method is particularly effective for the preparation of cyclic alkenes, as in this synthesis of muscone:

Ring-closing metathesis used in synthesis of muscone

Transition metal catalyzed hydrovinylation is another important alkene synthesis process starting from alkene itself.[8] In general, it involves the addition of a hydrogen and a vinyl group (or an alkenyl group) across a double bond. The hydrovinylation reaction was first reported by Alderson, Jenner, and Lindsey by using rhodium and ruthenium salts, other metal catalysts commonly employed nowadays included iron, cobalt, nickel, and palladium. The addition can be done highly regio- and stereo-selectively, the choices of metal centers, ligands, substrates and counterions often play very important role.[9][10][11][12]

From alkynes

Reduction of alkynes is a useful method for the stereoselective synthesis of disubstituted alkenes. If the cis-alkene is desired, hydrogenation in the presence of Lindlar's catalyst(-heterogeneous catalyst that consists of palladium deposited on calcium carbonate and treated with various forms of lead) is commonly used, though hydroboration followed by hydrolysis provides an alternative approach. Reduction of the alkyne by sodium metal in liquid ammonia gives the trans-alkene.[13]

Synthesis of cis- and trans-alkenes from alkynes

For the preparation multisubstituted alkenes, carbometalation of alkynes can give rise to a large variety of alkene derivatives.

Rearrangements and related reactions

Alkenes can be synthesized from other alkenes via rearrangement reactions. Besides olefin metathesis (described above), a large number of pericyclic reactions can be used such as the ene reaction and the Cope rearrangement.

Cope rearrangement of divinylcyclobutane to cyclooctadiene

In the Diels-Alder reaction, a cyclohexene derivative is prepared from a diene and a reactive or electron-deficient alkene.

Nomenclature

IUPAC Names

To form the root of the IUPAC names for alkenes, simply change the -an- infix of the parent to -en-. For example, CH3-CH3 is the alkane ethANe. The name of CH2=CH2 is therefore ethENe.

In higher alkenes, where isomers exist that differ in location of the double bond, the following numbering system is used:

  1. Number the longest carbon chain that contains the double bond in the direction that gives the carbon atoms of the double bond the lowest possible numbers.
  2. Indicate the location of the double bond by the location of its first carbon.
  3. Name branched or substituted alkenes in a manner similar to alkanes.
  4. Number the carbon atoms, locate and name substituent groups, locate the double bond, and name the main chain.
Naming substituted hex-1-enes

Cis-Trans notation

In the specific case of disubstituted alkenes where the two carbons have one substituent each, Cis-trans notation may be used. If both substituents are on the same side of the bond, it is defined as (cis-). If the substituents are on either side of the bond, it is defined as (trans-).

The difference between cis- and trans- isomers

E,Z notation

When an alkene has more than one substituent (especially necessary with 3 or 4 substituents), the double bond geometry is described using the labels E and Z. These labels come from the German words "entgegen," meaning "opposite," and "zusammen," meaning "together." Alkenes with the higher priority groups (as determined by CIP rules) on the same side of the double bond have these groups together and are designated Z. Alkenes with the higher priority groups on opposite sides are designated E. A mnemonic to remember this: Z notation has the higher priority groups on "ze zame zide."

The difference between E and Z isomers

Groups containing C=C double bonds

IUPAC recognizes two names for hydrocarbon groups containing carbon-carbon double bonds, the vinyl group and the allyl group. .[2]

AlkeneGroups.png

See also

Nomenclature links

  • Rule A-3. Unsaturated Compounds and Univalent Radicals [1] IUPAC Blue Book.
  • Rule A-4. Bivalent and Multivalent Radicals [2] IUPAC Blue Book.
  • Rules A-11.3, A-11.4, A-11.5 Unsaturated monocyclic hydrocarbons and substituents [3] IUPAC Blue Book.
  • Rule A-23. Hydrogenated Compounds of Fused Polycyclic Hydrocarbons [4] IUPAC Blue Book.

References

  1. ^ a b c d Wade, L.G. (Sixth Ed., 2006). Organic Chemistry. Pearson Prentice Hall. pp. 279. ISBN 1-4058-5345-X. 
  2. ^ a b c Moss, G. P.; Smith, P. A. S.; Tavernier, D. (1995). "Glossary of Class Names of Organic Compounds and Reactive Intermediates Based on Structure (IUPAC Recommendations 1995)". Pure and Applied Chemistry 67 (8–9): 1307–1375. doi:10.1351/pac199567081307. 
  3. ^ Barrows, Susan E.; Eberlein, Thomas H. (2005). "Understanding Rotation about a C=C Double Bond". J. Chem. Educ. 82 (9): 1329. doi:10.1021/ed082p1329. http://jchemed.chem.wisc.edu/Journal/Issues/2005/Sep/abs1329.html. 
  4. ^ Saunders, W. H. (1964). Patai, Saul. ed. The Chemistry of Alkenes. Wiley Interscience. pp. 149–150. 
  5. ^ Cram, D.J.; Greene, Frederick D.; Depuy, C. H. (1956). "Studies in Stereochemistry. XXV. Eclipsing Effects in the E2 Reaction1". Journal of the American Chemical Society 78 (4): 790–796. doi:10.1021/ja01585a024. 
  6. ^ Bach, R.D.; Andrzejewski, Denis; Dusold, Laurence R. (1973). "Mechanism of the Cope elimination". J. Org. Chem. 38 (9): 1742–3. doi:10.1021/jo00949a029. 
  7. ^ Snider, Barry B.; Matsuo, Y; Snider, BB (2006). "Synthesis of ent-Thallusin". Org. Lett. 8 (10): 2123–6. doi:10.1021/ol0605777. PMC 2518398. PMID 16671797. http://www.pubmedcentral.nih.gov/articlerender.fcgi?tool=pmcentrez&artid=2518398. 
  8. ^ Vogt, D. (2010). "Cobalt-Catalyzed Asymmetric Hydrovinylation". Angew. Chem. Int. Ed. 49 (40): 7166–8. doi:10.1002/anie.201003133. PMID 20672269. 
  9. ^ Grutters, M. M. P. Muller, C. Vogt, D. (2006). "Highly Selective Cobalt-Catalyzed Hydrovinylation of Styrene". J. Am. Chem. Soc. 128 (23): 7414–5. doi:10.1021/ja058095y. PMID 16756275. 
  10. ^ Hilt, G. Danz, M. Treutwein, J. (2009). "Cobalt-Catalyzed 1,4-Hydrovinylation of Styrenes and 1-Aryl-1,3-butadienes". Org. Lett. 11 (15): 3322–5. doi:10.1021/ol901064p. PMID 19583205. 
  11. ^ Sharma, R. K. RajanBabu, T. V. (2010). "Asymmetric Hydrovinylation of Unactivated Linear 1,3-Dienes". J. Am. Chem. Soc. 132 (10): 3295–7. doi:10.1021/ja1004703. PMC 2836389. PMID 20163120. http://www.pubmedcentral.nih.gov/articlerender.fcgi?tool=pmcentrez&artid=2836389. 
  12. ^ Ho, C.-Y., He, L. (2010). "Catalytic Intermolecular Tail-to-Tail Hydroalkenylation of Styrenes with alpha-Olefins: Regioselective Migratory Insertion Controlled by a Nickel/N-Heterocyclic Carbene". Angew. Chem. Int. Ed. 49 (48): 9182–9186. doi:10.1002/anie.201001849. PMID 20853303. 
  13. ^ Zweifel, George S.; Nantz, Michael H. (2007). Modern Organic Synthesis: An Introduction. New York: W. H. Freeman & Co.. pp. 366. ISBN 0-7167-7266-3. 


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Alkēne — Alkēne, s. Olefine …   Meyers Großes Konversations-Lexikon

  • alkene — ► NOUN Chemistry ▪ any of the series of unsaturated hydrocarbons containing a double bond, including ethylene and propene. ORIGIN from ALKYL(Cf. ↑24 7) …   English terms dictionary

  • alkene — [al′kēn΄] n. [ ALK(YL) + ENE] any of a series of unsaturated open chain hydrocarbons containing a double bond and having the general formula CnH2n: these compounds are sometimes said to be in the ethylene or olefin series …   English World dictionary

  • Alkene — Allgemeine Strukturformel für Alkene mit einer Doppelbindung Unter Alkenen (früher auch Olefine) werden chemische Verbindungen aus der Gruppe der Kohlenwasserstoffe verstanden, die an beliebiger Position eine oder mehrere Doppelbindungen zwischen …   Deutsch Wikipedia

  • Alkene — Al|ke|ne 〈Pl.; Chem.〉 ungesättigte Kohlenwasserstoffe mit der allgemeinen chemischen Formel CnH2n mit Ethylen als einfachstem Vertreter; Sy Olefine * * * Alkene   [Kurzwort], Singular Alken das, s, Olefine, ungesättigte azyklische… …   Universal-Lexikon

  • alkene — /al keen/, n. Chem. any member of the alkene series. [1895 1900; ALK(YL) + ENE] * * * …   Universalium

  • alkene — /ˈælkin / (say alkeen) noun any member of the alkene (olefin) series, with the general formula CnH2n. –alkenyl, adjective …   Australian English dictionary

  • alkene — alkenas statusas T sritis chemija apibrėžtis Alifatinis angliavandenilis, turintis vieną dvigubąjį ryšį. atitikmenys: angl. alkene; olefin rus. алкен; олефин ryšiai: sinonimas – etileninis angliavandenilis …   Chemijos terminų aiškinamasis žodynas

  • alkene — noun Etymology: International Scientific Vocabulary alkyl + ene Date: 1899 any of numerous unsaturated hydrocarbons having one double bond; specifically any of a series of open chain hydrocarbons CnH2n (as ethylene) …   New Collegiate Dictionary

  • alkene — noun An unsaturated, aliphatic hydrocarbon with one or more carbon–carbon double bonds …   Wiktionary


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.