BMW 801

BMW 801

The BMW 801 was a powerful German air-cooled radial aircraft engine built by BMW and used in a number of German military aircraft of World War II. The engine's cylinders were in two rows of seven cylinders each, the bore and stroke were both 156 mm (6.142in), giving a total capacity of 41.8 litres (2,547.40 in³). The engine generated between 1,560 and 2,000 PS (1,540-1,970 hp, or 1,150 and 1,470 kW). The unit (including mounts) weighed around 1,250 kg and was about 1.27 m (50in) across, depending on the model.

Development history

In the 1930s, BMW took out a license to build the Pratt & Whitney Hornet engines. By the mid-30s they had introduced an improved version, the BMW 132. The BMW 132 was widely used, most notably on the Junkers Ju 52, which it powered for much of that design's lifetime.

In 1935 the RLM funded prototypes of two much larger radial designs, one from Bramo, the Bramo 329, and another from BMW, the BMW 139. BMW bought Bramo soon after the projects started; unsurprisingly BMW folded the Bramo engineers into the BMW project, cancelling the Bramo design. The resulting proposal was essentially a two-row version of the BMW 132, the 1,400 hp (1,029 kW) BMW 139.

The BMW 139 was originally intended to be used in similar roles as the other German radials, namely bombers and transport aircraft, but mid-way through the program Kurt Tank suggested it for use in the Focke-Wulf Fw 190 fighter project. Radial engines were rare in land-based fighters at the time due to the size of their larger frontal area, but Tank felt that attention to detail could result in a streamlined radial that would not suffer undue drag.

The main concern was providing cooling air at the tops of the cylinders, which generally required a very large opening at the front of the aircraft. His solution for the BMW 139 was to use an engine-driven fan behind an oversized prop-spinner, blowing air through the engine, with some of it being "sucked" through S-shaped ducts over a radiator for oil cooling. However this system proved almost impossible to make work with the BMW 139; early prototypes of the Fw 190 demonstrated terrible cooling problems. Although the problems appeared to be fixable, since the engine was already fairly dated in terms of design, in 1938 BMW proposed an entirely new engine that could be brought to production quickly. Work started in October.

Differences between the BMW 139 and the new design were fairly minor and limited primarily to details except for the use of fourteen larger cylinders instead of eighteen smaller ones. The new design was given the name BMW 801 after BMW was given a new block of engine numbers by the RLM to use after their merger with Bramo. The BMW 801 retained the BMW 139's older-style single-valve intake and exhaust, while most engines of the era had moved to four valves per cylinder, or in British use, sleeve valves. Several advances were worked into the design, including the use of sodium-cooled valves and a fuel injection system. The supercharger was rather basic in the early models, using a single-stage two-speed design directly geared to the engine (unlike the DB 601's hydraulically-clutched version) which led to rather limited altitude performance, in keeping with its intended medium-altitude usage. One key advancement was the "kommandogerät" (command-device), a mechanical-hydraulic unit that automatically adjusted engine fuel flow, propeller pitch, supercharger setting, mixture and ignition timing in response to a single throttle lever, dramatically simplifying engine control. This could be considered a pioneering step towards the use of computerised "engine management" systems, as in modern automobile and truck engines.

The first BMW 801A's ran in April 1939, only six months after starting work on the design. The BMW 801B series were identical to the A models, but ran the airscrew in the opposite direction (counterclockwise, as seen from "behind" the engine) using a different gearbox. The A and B models were intended to be used in pairs on twin-engine designs, cancelling out net torque and making the plane easier to handle. The initial BMW 801 series had a lot of overheating problems especially with cylinders in the rear cylinder row and a number of efforts were improvised in an attempt to cure them. The BMW 801A/B/L engines delivered 1,560 PS (1,539 hp, 1,147 kW) for takeoff.

The BMW 801C was developed for use in single- or multi-engined fighters and included a new hydraulic prop control and various changes intended to improve cooling, including cooling "gills" on the cowling behind the engine. The BMW 801C engines used in the early Fw 190A versions of 1941 delivered 1,560 PS (1,539 hp, 1,147 kW) for takeoff. The BMW 801L was an A model with the hydraulic prop control mechanism introduced with the 801C engine.

The 801C was replaced with the BMW 801 D-2 series engines in early 1942, which ran on C2/C3 100 octane fuel instead of the A/B/C's B4 87 octane, boosting takeoff power to 1,700 PS (1,677 hp, 1,250 kW). The D-2 models also included a system for injecting a 50-50 water-methanol mixture known as MW50 into the supercharger output to cool the charge, and thereby reduce backpressure. Although practically every production model Fw 190 included the BMW 801D engine, it was not until very late in the war that the MW50 kits were actually supplied and available. With boosting on, low and medium-altitude performance improved considerably, with takeoff power increasing to 2,000 hp (1,470 kW). The BMW 801G and H models were D engines modified for use in bomber roles with lower gear ratios for driving larger propellers, clockwise and counterclockwise respectively.

With the engine now being used in higher-altitude fighter roles, a number of attempts were made to address the limited performance of the original supercharger. The BMW 801E was a modification of the D-2 using supercharger gear ratios tuned to higher altitudes. Although takeoff power was unaffected, cruise power increased over 100 hp (75 kW) and "high power" modes for climb and combat were likewise improved by up to 150 hp (110 kW). The E model was also used as the basis for the BMW 801R, which included a much more complex and powerful two-stage four-speed supercharger. Continued improvements to the basic E model led to the BMW 801F, which dramatically improved performance across the board, with takeoff power increasing to 2,400 hp (1,790 kW). It was planned to use the F on all late-model Fw 190's, but the war ended before production started.

A number of attempts were made to use turbochargers on the BMW 801 series as well. The first used a modified BMW 801D to create the BMW 801J, delivering 1,810 PS (1,785 hp, 1,331 kW) at takeoff and 1,500 hp (1,103 kW) at 40,000 ft (12,200 m), an altitude where the D was struggling to produce 630 hp (463 kW). The BMW 801E was likewise modified to create the BMW 801Q, delivering a superb 1,715 hp (1,261 kW) at 40,000 ft (12,200 m), power ratings no existing allied engine could touch. However none of these engines ever entered production due to high costs, and the various high-altitude designs based on them were forced to turn to other engines entirely, typically the Junkers Jumo 213.

Engines were typically delivered from BMW complete in their cowling, ready to be bolted to the front of the plane, since 1942 as "Motoranlage (M)" and 1944/1945 as "Triebwerksanlage (T)". The Motorenanlage was the interchangeable "Kraftei", or "power-egg", unitized powerplant installation format used in many German wartime aircraft, with some need for external add-ons and the Triebwerksanlage was the Motoranlage plus some external mountings, such as exhaust pipes, as a completely interchangeable unit.

The M and T versions confuse the naming considerably, as they referred to these complete kits and their "bare" engine counterparts almost interchangeably. The A, B and L models were known (logically) as the MA, MB and ML in this form, but the common D-2 was instead known as the MG. The E model was delivered as the TG or TH, seemingly suggesting a relation to the G and H engines, but in fact those were delivered as the TL and TP. It is rather common to see the turbocharged versions referred to only with the T, notably the TJ and TQ models, further confusing the issue.

Variants

* BMW 801A,B,C: 1,560 PS (1,539 hp, 1,147 kW)
* BMW 801D,G,H: 1,700 hp (1,677 hp, 1,250 kW)
* BMW 801E,S: 2,000 hp (1,973 hp, 1,471 kW)
* BMW 801F: 2,400 hp (2,367 hp, 1,765 kW), development halted by the end of the war

pecifications (BMW 801 C-2)

"Data from: Jane's" [Jane's 1989, p.287.] pistonspecs

type=14-cylinder supercharged two-row air-cooled radial engine
bore=156 mm (6.142 in)
stroke=156 mm (6.142 in)
displacement=41.8 litres (2,547.4 in³)
length=2,006 mm (79 in)
diameter=1,290 mm (51 in)
width=
height=
weight=1,055 kg (2,325 lb)
valvetrain=One intake and one sodium-cooled exhaust valve per cylinder
supercharger=Gear-driven single-stage two-speed
turbocharger=
fuelsystem=Fuel injection
fueltype=
oilsystem=
coolingsystem=Air-cooled
power=1,560 PS (1,539 hp, 1,147 kW) at 2,700 rpm for takeoff
specpower=28.1 kW/L (0.62 hp/in³)
compression=6.5:1
fuelcon=
specfuelcon=0.308 kg/(kW·h) (0.506 lb/(hp·h))
oilcon=
power/weight=1.11 kW/kg (0.69 hp/lb)

Applications

;flag|Germany|Nazi
* Dornier Do 217
* Focke-Wulf Fw 190
* Junkers Ju 88
* Junkers Ju 188
* Junkers Ju 290
* Junkers Ju 388
* Junkers Ju 390
* Messerschmitt Me 264

ee also

*List of aircraft engines

Comparable engines

* Bristol Hercules
* Pratt & Whitney R-1830
* Wright R-2600
* Fiat A.74
* Gnome-Rhône 14N
* Mitsubishi Kinsei
* Nakajima Sakae
* Shvetsov ASh-82

References

Notes

Bibliography

* "Jane's Fighting Aircraft of World War II". London. Studio Editions Ltd, 1989. ISBN 0-517-67964-7

External links

* [http://www.white1foundation.org/parts/801_cutaway.jpgTechnical drawing of a BMW 801A in high resolution]
* [http://inter.action.free.fr/images/affiches/bmw801d.jpgTechnical drawing of a BMW 801D in high resolution]


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • BMW 801 — BMW 801 …   Deutsch Wikipedia

  • Bmw 801 — Le BMW 801, est un moteur radial d avion, fabriqué par BMW et utilisé par de nombreux avions militaires allemands lors de la Seconde Guerre mondiale, le plus connu étant le chasseur Focke Wulf Fw 190 Würger. Historique Au début des années trente …   Wikipédia en Français

  • BMW 801 — Vue de l avant, avec le ventilateur et le moyeu d hélice Constructeur …   Wikipédia en Français

  • BMW — Saltar a navegación, búsqueda Bayerische Motoren Werke AG Eslogan España: ¿Te gusta conducir? Canadá: The Ultimate Driving Experience Alemania: Freude am …   Wikipedia Español

  • BMW — Logo de BMW Group …   Wikipédia en Français

  • BMW Group — BMW Logo de BMW Group …   Wikipédia en Français

  • Bmw — Logo de BMW Group …   Wikipédia en Français

  • BMW 132 — Der BMW 132 ist ein luftgekühlter OHV N …   Deutsch Wikipedia

  • BMW AG — Bayerische Motoren Werke AG Unternehmensform Aktiengesellschaft ISIN …   Deutsch Wikipedia

  • BMW Group — Bayerische Motoren Werke AG Unternehmensform Aktiengesellschaft ISIN …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”