Drinking water quality standards

Drinking water quality standards

Drinking water quality standards describes the quality parameters set for drinking water . Despite the truism that every human on this planet needs drinking water to survive and that water can contain many harmful constituents, there are no universally recognised and accepted international standards for drinking water. Even where standards do exist, and are applied, the permitted concentration of individual constituents may vary by as much as ten times from one set of standards to another.

Many developed countries specify standards to be applied in their own country. In Europe this includes the Drinking water directive and in the USA the United States Environmental Protection Agency (EPA) establishes down standards as required by the Safe Drinking Water Act. For countries without a legislative or administrative framework for such standards, the World Health Organisation publishes guidelines on the standards that should be achieved[1]

Where standards do exist most are expressed as guidelines or targets and very few have any legal basis or are subject to enforcement.[2] The European Drinking Water Directive and the Safe Water Act in the USA are two exceptions where there is a requirement to legally comply with specific standards.

In Europe this includes a requirement for member states to enact appropriate local legislation to mandate the directive in each country. Routine inspection and, where required, enforcement is enacted by means of penalties imposed by the European Commission on non-compliant nations.

Countries with guideline values as their standards include Canada which has guideline values for a relatively small suite of parameters, New Zealand where there is a legislative basis but water providers have to make "best endeavours" to comply with the standards[3] and Australia

Contents

Range of standards

Although drinking water standards are frequently referred to as if they are simple lists of parametric values, standards documents also specify sampling location choice, sampling methods, laboratory analytical methods and laboratory AQC. In addition a number of standards documents also make reference to the statistical treatment of results, dealing with temporal and seasonal variations, summation of related parameters and treatment of apparently aberrant results.

Parametric values

(Parametric value also has a specific and different mathematical meaning)

A parametric value in this context is most commonly the concentration of a substance, e.g. 30 mg/l of Iron. It may also be a count such as 500 E. coli per litre or a statistical value such as the average concentration of copper is 2 mg/l. Many countries not only specify parametric values that may have health impacts but also specify parametric values for a range of constituents that by themselves are unlikely to have any impact on health. These include colour, turbidity, pH and the organoleptic parameters (taste and smell).

It is possible and technically acceptable to refer to the same parameter in different ways that may appear to suggest a variation in the standard required. For example, Nitrite may be measured as Nitrite ion or expressed as N. A standard of Nitrite as N of 1.4 mg/l would be equal to a nitrite ion concentration of 4.6 mg/l - an apparent difference of nearly three fold.

Australian standards

Drinking water quality standards in Australia have been developed by the Australian Government National Health and Medical Research Council (NHMRC) in the form of the Australian Drinking Water Guidelines.[4] These guidelines provide contaminant limits (pathogen, aesthetic, organic, inorganic and radiological) as well as guidance on applying limits for the management of drinking water in Australian drinking water treatment and distribution systems.

European Union standards

The following parametric standards are included in the Drinking Water directive and are expected to be enforced by appropriate legislation in every country in the European Union. Simple parametric values are reproduced here but in many cases the original directive also provides caveats and notes about many of the values given.

United States standards

In the USA the legislation controlling drinking water quality is the Safe Water Act which is implemented federally by the EPA. However many individual States also apply their own standards which may be more rigorous or include additional parameters. Standards set by the EPA in the USA are not international standards since they apply to a single country. However many countries look to the USA for appropriate scientific and public health guidance and may adopt USA standards.

World Health Organisation guidelines

These guidelines include the following recommended limits on naturally occurring constituents that may have direct adverse health impact:

  • Arsenic 10μg/l
  • Barium 700μg/l
  • Boron 2400μg/l
  • Chromium 50μg/l
  • Fluoride 1500μg/l
  • Selenium 40μg/l
  • Uranium 30μg/l

For man-made pollutants potentially occurring in drinking water the following standards are proposed.

  • Cadmium 3μg/l
  • Mercury 6μg/l For inorganic mercury

Organic species:

  • Benzene 10μg/l
  • Carbon tetrachloride 4μg/l
  • 1,2-Dichlorobenzene 1000μg/l
  • 1,4-Dichlorobenzene 300μg/l
  • 1,2-Dichloroethane 30μg/l
  • 1,2-Dichloroethene 50μg/l
  • Dichloromethane 20μg/l
  • Di(2-ethylhexyl)phthalate 8 μg/l
  • 1,4-Dioxane 50μg/l
  • Edetic acid 600μg/l
  • Ethylbenzene 300 μg/l
  • Hexachlorobutadiene 0.6 μg/l
  • Nitrilotriacetic acid 200μg/l
  • Pentachlorophenol 9μg/l
  • Styrene 20μg/l
  • Tetrachloroethene 40μg/l
  • Toluene 700μg/l
  • Trichloroethene 20μg/l
  • Xylenes 500μg/l

Comparison of parametric values

The following table provides a comparison of a selection of parameters concentrations listed by WHO, the European Union and the EPA.

" indicates that no standard has been identified by editors of this article and ns indicates that no standard exists.

Parameter World Health Organization European Union United States
Acrylamide 0.10 μg/
Arsenic 10μg/l 0.1 μg/l 10μg/l
Antimony ns 5.0 μg/l
Barium 700μg/l ns
Benzene 10μg/l 1.0 μg/l
Benzo(a)pyrene 0.010 μg/l
Boron 2.4mg/l 1,0 mg/l
Bromate 10 μg/l
Cadmium 3μg/l 5,0 μg/l
Chromium 50μg/l 50 μg/l
Copper 2.0 mg/l
Cyanide 50 μg/l
1,2-dichloroethane 3.0 μg/l
Epichlorohydrin 0.10 μg/l
Fluoride 1.5 mg/l 1.5 mg/l 4 mg/l
Lead 10 μg/l 15 μg/l
Mercury 6μg/l 1.0 μg/l
Nickel 20 μg/l
Nitrate 50 mg/l
Nitrite 0.50 mg/l
Pesticides (individual) 0.10 μg/ l
Pesticides — Total 0.50 μg/l
Polycyclic aromatic hydrocarbons l 0.10 μg/
Selenium 40μg/l 10 μg/l
Tetrachloroethene and Trichloroethene 40μg/l 10 μg/l

See also

References

  1. ^ Guidelines for Drinking-water Quality , Fourth Edition; World Health Organisation; 2011
  2. ^ Safe Drinking Water (Canada)- What is the Purpose of Drinking Water Quality Guidelines/Regulations?
  3. ^ Drinking water for New Zealand
  4. ^ [1]

Further reading


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Drinking water quality in the United States — is a source of concern about pollutants in certain localities. In 2006, 89.3 percent of the nation s community water systems were in compliance with all of more than 90 U.S. Environmental Protection Agency (EPA) standards.[1]:220 Most of the… …   Wikipedia

  • Drinking water quality legislation of the United States — In the United States, public drinking water is governed by the laws and regulations enacted by the federal and state governments. Certain ordinances may also be created at a more local level. The Safe Drinking Water Act (SDWA) is the principal… …   Wikipedia

  • Drinking water — Tap water Drinking water or potable water is water pure enough to be consumed or used with low risk of immediate or long term harm. In most developed countries, the water supplied to households, commerce and industry is all of drinking water… …   Wikipedia

  • Water quality — A rosette sampler is used to collect samples in deep water, such as the Great Lakes or oceans, for water quality testing. Water quality is the physical, chemical and biological characteristics of water.[1] It is a measure of the condition of… …   Wikipedia

  • Drinking water directive — The European Drinking Water Directive (DWD), Council Directive 98/83/EC concerns the quality of water intended for human consumption and forms part of the regulation of Water supply and sanitation in the European Union. The Directive is intended… …   Wikipedia

  • Drinking Water Inspectorate — The Drinking Water Inspectorate is a section of Department for Environment, Food and Rural Affairs (DEFRA) set up to regulate the public water supply companies in England and Wales. Based in Whitehall, it produces an annual report showing the… …   Wikipedia

  • Safe Drinking Water Act — Full title An Act to amend the Public Health Service Act to assure that the public is provided with safe drinking water, and for other purposes Colloquial name(s) SDWA Enacted by the 93rd United States Congress …   Wikipedia

  • Water supply and sanitation in Pakistan — Drinking water qualityGenerally, water pressure is low in Pakistani supply systems. Together with leaky pipes, this has led to infiltration of contaminated water. As a result of sewage and industrial waste, which leaked into drinking water… …   Wikipedia

  • Water supply and sanitation in the European Union — still is under the responsibility of each member state. Nevertheless, the European Union established some policies which impact the National water strategies tremendously. However, WSS evolved in every Member State independently until the… …   Wikipedia

  • Water supply and sanitation in Israel — is intricately linked to the historical development of Israel in the context of scarce water resources. Because the coastal plain of historical Palestine had few water resources, Theodor Herzl already envisioned the transfer of water from the… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”