Design review (US Government)

Design review (US Government)

In the United States military and NASA's engineering design life cycle, a phase of design reviews are held for technical and programmatic accountability and to authorize the release of funding to a project.[1] This article describes the major phases of that systems engineering process. A design review provides an in-depth assessment, by an independent team of discipline experts and managers, that the design (or concept) is realistic and attainable from a programmatic and technical sense.

Design review is also required of medical device developers as part of a system of design controls described in the US Food and Drug Administration's governing regulations in 21CFR820. In 21CFR820.3(h), design review is described as " documented, comprehensive, systematic examination of the design to evaluate the adequacy of the design requirements, to evaluate the capability of the design to meet these requirements, and to identify problems." The FDA also specifies that a design review should include an independent reviewer.

Review process

Mission Concept Review

The MCR affirms the mission need and examines the proposed mission's objectives and the concept for meeting those objectives.

System Requirements Review

The SRR examines the functional and performance requirements defined for the system and the preliminary program or project plan and ensures that the requirements and the selected concept will satisfy the mission.

Mission Definition Review

The MDR examines the proposed requirements, the mission architecture, and the flow down to all functional elements of the mission to ensure that the overall concept is complete, feasible, and consistent with available resources.

System Definition Review

The SDR examines the proposed system architecture and design and the flow down to all functional elements of the system.

Preliminary Design Review

The PDR demonstrates that the preliminary design meets all system requirements with acceptable risk and within the cost and schedule constraints and establishes the basis for proceeding with detailed design. It will show that the correct design options have been selected, interfaces have been identified, and verification methods have been described.[2]

The following are typical objectives of a PDR:

  • Ensure that all system requirements have been allocated, the requirements are complete, and the flowdown is adequate to verify system performance
  • Show that the proposed design is expected to meet the functional and performance requirements
  • Show sufficient maturity in the proposed design approach to proceed to final design
  • Show that the design is verifiable and that the risks have been identified, characterized, and mitigated where appropriate
Critical Design Review

The CDR demonstrates that the maturity of the design is appropriate to support proceeding with full-scale fabrication, assembly, integration, and test. CDR determines that the technical effort is on track to complete the flight and ground system development and mission operations, meeting mission performance requirements within the identified cost and schedule constraints.[3]

The following are typical objectives of a CDR:

  • Ensure that the "build-to" baseline contains detailed hardware and software specifications that can meet functional and performance requirements
  • Ensure that the design has been satisfactorily audited by production, verification, operations, and other specialty engineering organizations
  • Ensure that the production processes and controls are sufficient to proceed to the fabrication stage
  • Establish that planned Quality Assurance (QA) activities will establish perceptive verification and screening processes for producing a quality product
  • Verify that the final design fulfills the specifications established at PDR
Production Readiness Review

A PRR is held for FS&GS projects developing or acquiring multiple or similar systems greater than three or as determined by the project. The PRR determines the readiness of the system developers to efficiently produce the required number of systems. It ensures that the production plans; fabrication, assembly, and integration enabling products; and personnel are in place and ready to begin production.

Test Readiness Review

A TRR ensures that the test article (hardware/software), test facility, support personnel, and test procedures are ready for testing and data acquisition, reduction, and control. This is not a prerequisite for KDP E.

System Acceptance Review

The SAR verifies the completeness of the specific end products in relation to their expected maturity level and assesses compliance to stakeholder expectations. The SAR examines the system, its end products and documentation, and test data and analyses that support verification. It also ensures that the system has sufficient technical maturity to authorize its shipment to the designated operational facility or launch site.

Operational Readiness Review

The ORR examines the actual system characteristics and the procedures used in the system or end product's operation and ensures that all system and support (flight and ground) hardware, software, personnel, procedures, and user documentation accurately reflect the deployed state of the system.

The following are typical objectives of an ORR:

  • Establish that the system is ready to transition into an operational mode through examination of available ground and flight test results, analyses, and operational demonstrations
  • Confirm that the system is operationally and logistically supported in a satisfactory manner considering all modes of operation and support (normal, contingency, and unplanned)
  • Establish that operational documentation is complete and represents the system configuration and its planned modes of operation
  • Establish that the training function is in place and has demonstrated capability to support all aspects of system maintenance, preparation, operation, and recovery.
Flight Readiness Review

The FRR examines tests, demonstrations, analyses, and audits that determine the system's readiness for a safe and successful flight or launch and for subsequent flight operations. It also ensures that all flight and ground hardware, software, personnel, and procedures are operationally ready.

The following are typical objectives of a FRR:

  • Receive certification that flight operations can safely proceed with acceptable risk.
  • Confirm that the system and support elements are properly configured and ready for launch.
  • Establish that all interfaces are compatible and function as expected.
  • Establish that the system state supports a launch "go" decision based on go/no-go criteria.

See also

References

  1. ^ NASA Procedural Requirements, Subject: NASA Systems Engineering Processes and Requirements, Appendix G Responsible Office: Office of the Chief Engineer, NPR 7123.1A, Effective Date: March 26, 2007, Expiration Date: March 26, 2012
  2. ^ http://www.hyperthot.com/pm_desreviews.htm
  3. ^ http://nawctsd.navair.navy.mil/Resources/Library/Acqguide/cdr.htm

Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Design review — This article is about the general concept of design reviews. For Design Reviews in DoD and NASA, see Design review (US Government). A design review is a milestone within a product development process whereby a design is evaluated against its… …   Wikipedia

  • Design Review (publication) — This article is about the magazine, for the military and government engineering design life cycle, see: Design review. Design Review was a publication of the Wellington Architectural Centre. The Centre was founded in 1946, and began the first… …   Wikipedia

  • System Design Review — A System Design Review (SDR) is a scheduled review, of many government contractor relations, which ensures continuous involvement throughout a program. The SDR is defined in the Air Force s MIL STD 1521.The SDR is a technical review conducted to… …   Wikipedia

  • Government procurement in the United States — is based on many of the same principles as commercial contracting, but is subject to special laws and regulation as described below. Persons entering into commercial contracts are pretty much free to do anything that they can agree on. Each… …   Wikipedia

  • Design methods — is a broad area that focuses on: Divergence – Exploring possibilities and constraints of inherited situations by applying critical thinking through qualitative and quantitative research methods to create new understanding (problem space) toward… …   Wikipedia

  • Design U — Genre Design Created by Tim Alp Starring Maureen Ross Neilson, Ernst Hupel, Melanie Martin, Baron Bryant, Christina Maureen Rice, William Mood, Blair Varden, Penny Southam, Ramón Robleto, Tyler Hamilton, Jeff Palmer, Lucie Soulard Theme music… …   Wikipedia

  • Design management — is the business side of design. Design managers need to speak the language of the business and the language of design …   Wikipedia

  • Government contract — Contracting with the U.S. Government is based on many of the same principles as commercial contracting andcan be very profitable, but is sufficiently different from commercial contracting to require special care.Persons entering into commercial… …   Wikipedia

  • Government simulation game — Part of a series on …   Wikipedia

  • Government of New York City — The government of New York City is organized under the City Charter and provides for a strong mayor council system. The government of New York is more centralized than that of most other U.S. cities, with the city government being responsible for …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”