Cold Lake oil sands

Cold Lake oil sands
Cold Lake oil sands

The Cold Lake oil sands deposit is one of the largest oil sands deposits in Alberta, South of the Athabasca oil sands, and directly east of the capital Edmonton
Country  Canada
Region Alberta and Saskatchewan
Offshore/onshore Onshore, unconventional

The Cold Lake oil sands are a large deposit of oil sands (also pejoravtively known as tar sands) located near Cold Lake, Alberta.[1][2][3][4][5] Cold Lake is east of Alberta's capital, Edmonton, near Alberta's border with Saskatchewan, and a small portion of the Cold Lake field lies in Saskatchewan.

In 1980 a plant in Cold Lake was one of just two oil sands plants under construction in Alberta.[4] In 1980 Canada's federal government was considering dropping its assistance in the development of Alberta's oil sand in favor of offshore oil deposits east of Newfoundland and Labrador.

Some of the oil sands in the Cold Lake deposit have a low enough density that they can be extracted through drilling, as opposed to mining.[6]

See also

References

  1. ^ "Canada is consistently the top supplier of oil imports to the United States". United States Department of Energy. http://www.eia.doe.gov/cabs/canada/Oil.html. Retrieved 2010-06-21. "In 2008, oil sands production represented approximately half of Canada’s total crude oil production. The Athabasca oil sands deposit in northern Alberta is one of largest oil sands deposits in the world. There are also sizable oil sands deposits on Melville Island in the Canadian Arctic, and two smaller deposits in northern Alberta near Cold Lake and Peace River." 
  2. ^ Bruce Biossat (1973-11-23). "An oil-hungry world eyes Alberta's sand". Rome News-Tribune. http://news.google.ca/newspapers?id=bJ4xAAAAIBAJ&sjid=20MDAAAAIBAJ&pg=2414,3655169&dq=cold-lake+oil-sand+. Retrieved 2010-06-22. "Great as is the Athabasca spread, where real scientific exploration began just 60 years ago, it's not the full story. Alberta hold three other oil sands deposits -- Wabasca just southwest of Athabasca, Cold Lake to the south, Peace River to the west." 
  3. ^ Tom Cohen (2003-02-23). "Canada's oil sands gain importance in an unstable political climate". The Dispatch. http://news.google.ca/newspapers?id=s_EbAAAAIBAJ&sjid=FFMEAAAAIBAJ&pg=5253,4567875&dq=cold-lake+oil-sand+. Retrieved 2010-06-22. "Stringham said total investment in the oil sands -- which include the Athabasca River, Cold Lake and Peace River regions around Fort McMurray, 210 miles northeast of Edmonton -- was $11.3 billion from 1996-2001, with another $4.6 billion on new projects under construction and at least $16.6 billion more in potential projects through 2010." 
  4. ^ a b "Don't cancel oil sands plants Alberta warns". Montreal Gazette. 1980-11-19. http://news.google.ca/newspapers?id=22UxAAAAIBAJ&sjid=oqQFAAAAIBAJ&pg=1510,4534214&dq=cold-lake+oil-sand+. Retrieved 2010-06-22. "Ottawa would inflict serious economic losses on all Canada if it cancels development of Alberta's two oil sands plants, Alberta Energy Minister Merv Leitch said yesterday. Leitch said the Alsands and Cold Lake plants could be developed for export production if the oil is not needed for eastern Canadian use." 
  5. ^ O.P. Strausz. "The Chemistry of the Alberta Oil Sand Bitumen". University of Alberta. http://www.anl.gov/PCS/acsfuel/preprint%20archive/Files/22_3_MONTREAL_06-77_0171.pdf. Retrieved 2010-06-22. 
  6. ^ "Premium Petroleum Corp. Increases Lands Position to 11,520 Acres". Premium Petroleum Corp. 2007-09-19. http://www.marketwire.com/press-release/Premium-Petroleum-Corp-Increases-Lands-Position-to-11520-Acres-PINK-SHEETS-PPTL-771517.htm. Retrieved 2010-06-22. "After 5 or 6 days the well was checked again, only to discover approximately 250 meters (800 foot) head of oil was present in the well bore - evidence that Oil Sands had been encountered, and that it was Flowing Oil Sands. In accordance with Alberta Energy's designation, the project is categorized Oil Sands; located in the southern part of the Cold Lake Oil Sands district." 

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Cold Lake, Alberta — Cold Lake   City   City of Cold Lake …   Wikipedia

  • Melville Island oil sands — Map showing location of Melville Island in Canada. Country   …   Wikipedia

  • Cold Lake (Alberta) — Cold Lake Lage in Alberta …   Deutsch Wikipedia

  • Oil sands — The Athabasca oil sands in Alberta, Canada, are a very large source of bitumen, which can be upgraded to synthetic crude oil. Bituminous sands, colloquially known as oil sands or tar sands, are a type of unconventional petroleum deposit. The… …   Wikipedia

  • History of the petroleum industry in Canada (oil sands and heavy oil) — Canada s oil sands and heavy oil resources are among the world s great petroleum deposits. They include the vast oil sands of northern Alberta, and the heavy oil reservoirs that surround the small city of Lloydminster, which sits on the border… …   Wikipedia

  • Athabasca Oil Sands — The Athabasca Oil Sands (also known as the Athabasca Tar Sands) are large deposits of bitumen, or extremely heavy crude oil, located in northeastern Alberta, Canada. These oil sands consist of a mixture of crude bitumen (a semi solid form of… …   Wikipedia

  • Oil Creek State Park — Pennsylvania State Park Natural Monument (IUCN III) …   Wikipedia

  • lake — lake1 /layk/, n. 1. a body of fresh or salt water of considerable size, surrounded by land. 2. any similar body or pool of other liquid, as oil. 3. (go) jump in the lake, (used as an exclamation of dismissal or impatience.) [bef. 1000; ME lak(e) …   Universalium

  • Lake — /layk/, n. Simon, 1866 1945, U.S. engineer and naval architect. * * * I Relatively large body of slow moving or standing water that occupies an inland basin. Lakes are most abundant in high northern latitudes and in mountain regions, particularly …   Universalium

  • Beaverhill Lake Group — Stratigraphic range: Middle to Late Devonian 390–365 Ma …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”