Metal foam

Metal foam
Foamed aluminium

A metal foam is a cellular structure consisting of a solid metal, frequently aluminium, containing a large volume fraction of gas-filled pores. The pores can be sealed (closed-cell foam), or they can form an interconnected network (open-cell foam). The defining characteristic of metal foams is a very high porosity: typically 75–95% of the volume consists of void spaces. The strength of foamed metal possesses a power law relationship to its density; i.e., a 20% dense material is more than twice as strong as a 10% dense material.

Metallic foams typically retain some physical properties of their base material. Foam made from non-flammable metal will remain non-flammable and the foam is generally recyclable back to its base material. Coefficient of thermal expansion will also remain similar while thermal conductivity will likely be reduced.[1]

Contents

Open-cell metal foams

Open-cell metal foam

Open celled metal foams are usually replicas using open-celled polyurethane foams as a skeleton and have a wide variety of applications including heat exchangers (compact electronics cooling, cryogen tanks, PCM heat exchangers), energy absorption, flow diffusion and lightweight optics. Due to the high cost of the material it is most typically used in advanced technology aerospace and manufacturing.

Extremely fine-scale open-cell foams, with cells too small to be visible to the naked eye, are used as high-temperature filters in the chemical industry.

Metallic foams are nowadays used in the field of compact heat exchangers to increase heat transfer at the cost of an additional pressure drop.[2][3][4] However, their use permits to reduce substantially the physical size of a heat exchanger, and so fabrication costs. To model these materials, most works uses idealized and periodic structures or averaged macroscopic properties.

Closed-cell metal foams

Closed-cell metal foam was first reported in 1926 by Meller in a French patent where foaming of light metals either by inert gas injection or by blowing agent was suggested.[5] The next two patents on sponge-like metal were issued to Benjamin Sosnik in 1948 and 1951 who applied mercury vapor to blow liquid aluminium.[6][7]

Closed-cell metal foams have been developed since about 1956 by John C. Elliott at Bjorksten Research Laboratories. Although the first prototypes were available in the 50s, commercial production was started only in the 90s by Shinko Wire company in Japan. Metal foams are commonly made by injecting a gas or mixing a foaming agent (frequently TiH2) into molten metal. In order to stabilize the molten metal bubbles, high temperature foaming agent (nano- or micrometer sized solid particles) is required. The size of the pores, or cells, is usually 1 to 8 mm.

Closed-cell metal foams are primarily used as an impact-absorbing material, similarly to the polymer foams in a bicycle helmet but for higher impact loads. Unlike many polymer foams, metal foams remain deformed after impact and can therefore only be used once. They are light (typically 10–25% of the density of an identical non-porous alloy; commonly those of aluminium) and stiff, and are frequently proposed as a lightweight structural material. However, they have not yet been widely used for this purpose.

Closed-cell foams retain the fire resistant and recycling capability of other metallic foams but add an ability to float in water.

Orthopedic uses

Foam metal has also begun to be used as an experimental prosthetic in animals. In this application, a hole is drilled into the bone and the metal foam inserted letting the bone grow into the metal for a permanent connection. For orthopedic uses, foams from metals such as tantalum or titanium are often used, as these metals exhibit high tensile strength, corrosion resistance with excellent biocompatibility.

Clinical studies on mammals

A notable example of clinical use of metallic foams is a Siberian Husky named Triumph whose both back legs received foam metal prostheses.[8] Studies on mammals have shown that porous metals, such as titanium foam, may allow the formation of vascular systems within the porous area.[9]

Orthopedic use in humans

More recently, orthopedic device manufacturers have started producing devices that use either foam construction or metal foam coatings[10] to achieve the desired levels of osseointegration.[11][12][13]

Automobile uses

Metallic foams are currently being looked at as a new material for automobiles. The main goal of the use of metallic foams in vehicles is to increase sound dampening, reduce the weight of the automobile, and increase energy absorption in case of crashes, or in military applications, to combat the concussive force of IEDs.

The metallic foams that are being looked at currently, are aluminium and its alloys due to their low density (0.4–0.9 g/cm3). In addition these foams have a high stiffness, are fire resistant, do not give off toxic fumes, are fully recyclable, have high energy absorbance, have low thermal conductivity, have low magnetic permeability, and are efficient at sound dampening, especially in comparison to light weight hollow parts. In addition partial addition of metallic foams in hollow parts of the car will decrease weakness points usually associated with car crashes and noisy vibrations. These foams are cheap to cast by using powder metallurgy (as compared to casting of other hollow parts).

In comparison to polymer foams (for uses in automobiles), metallic foams are stiffer, stronger, and more energy absorbent. They are more fire resistant, and have better weathering properties when considering UV light, humidity, and temperature. However, they are heavier, more expensive, and non-insulating.[14]

Metal foam technology has also been applied in the treatment of the automotive exhaust gas.[15] Compared to the traditional catalytic converter that uses cordierite ceramic as substrate, the metal foam substrate can offer better heat transfer and exhibits excellent mass-transport properties (high turbulence) offering possibilities for using less platinum catalyst.[16]

Gallery

See also

References

  1. ^ Compare Materials: Cast Aluminium and Aluminium Foam. Makeitfrom.com. Retrieved on 2011-11-19.
  2. ^ F. Topin, J.-P. Bonnet, B. Madani, L. Tadrist (2006). "Experimental Analysis of Multiphase Flow in Metallic foam: Flow Laws, Heat Transfer and Convective Boiling". Advanced Engineering Materials 8 (9): 890–899. doi:10.1002/adem.200600102. 
  3. ^ Banhart, J. (2001). "Manufacture, Characterization and application of cellular metals and metal foams". Progress in materials Science 46 (6): 559–632. doi:10.1016/S0079-6425(00)00002-5. 
  4. ^ DeGroot, C.T., Straatman, A.G., and Betchen, L.J. (2009). "Modeling forced convection in finned metal foam heat sinks". J. Electron. Packag. 131 (2): 021001. doi:10.1115/1.3103934. 
  5. ^ M.A. De Meller, French Patent 615,147 (1926).
  6. ^ B. Sosnick, U.S. Patent 2,434,775 (1948).
  7. ^ B. Sosnick, U.S. Patent 2,553,016 (1951).
  8. ^ "Triumph The Dog Ready To Run With Prostheses". http://cbs4denver.com/local/Colorado.News.Denver.2.556922.html. 
  9. ^ Osseointegration with Titanium Foam in Rabbit Femur, YouTube
  10. ^ Titanium coatings on Orthopedic Devices. Youtube
  11. ^ Biomet Orthopedics, Regenerex® Porous Titanium Construct
  12. ^ Zimmer Orthopedics, Trabeluar Metal Technology
  13. ^ Zimmer CSTiTM (Cancellous-Structured Titanium TM) Porous Coating
  14. ^ New Concept for Design of Lightweight Automotive Components
  15. ^ Alantum Innovations in Alloy Foam: Home. Alantum.com. Retrieved on 2011-11-19.
  16. ^ Development of Metal Foam Based Aftertreatment on a Diesel Passenger Car – Virtual Conference Center. Vcc-sae.org. Retrieved on 2011-11-19.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Foam — This article is about the substance formed from trapped gas bubbles. For other uses, see Foam (disambiguation). Soap foam bubbles Contents 1 Definition …   Wikipedia

  • foam — n Foam, froth, spume, scum, lather, suds, yeast are comparable when they denote either a mass of bubbles gathering in or on the surface of a liquid or something as insubstantial as such a mass. Foam is the most comprehensive of these terms but is …   New Dictionary of Synonyms

  • foam — foamable, adj. foamer, n. foamingly, adv. foamless, adj. foamlike, adj. /fohm/, n. 1. a collection of minute bubbles formed on the surface of a liquid by agitation, fermentation, etc.: foam on a glass of beer. 2. the froth of perspiration, caused …   Universalium

  • Foam party — A foam party is a social event in which participants dance to music on a dance floor covered in several feet of suds or bubbles dispensed from a foam machine. For safety reasons, the foam is generated from non toxic, non staining, hypo allergenic …   Wikipedia

  • Metal roof — A metal roof, often referred to as a tin roof, is a roofing system made from metal pieces or tiles. It is a component of the building envelope. Enough corrugated zinc/aluminium sheeting to cover an average sized house, transported by motor cycle …   Wikipedia

  • Foam weapon — A foam weapon, (also known as a boffer or latex weapon ), is a padded weapon used for simulated combat. Such weapons are typically used in live action role playing games. TerminologyIn the United States the term boffer is used for all foam… …   Wikipedia

  • foam — [[t]foʊm[/t]] n. 1) a collection of minute bubbles formed on the surface of a liquid by agitation, fermentation, etc 2) frothy perspiration on the skin, as of a horse 3) froth formed from saliva in the mouth, as in rabies 4) a thick, frothy… …   From formal English to slang

  • foam path — A path of fire extinguisher foam laid on a runway by firefighters to assist an aircraft in an emergency landing by minimizing the risk of fire from metal scraping against the runway surface. Also called a foam carpet …   Aviation dictionary

  • foam core —    or foam board    A strong, stiff, resilient, and lightweight board of polystyrene laminated with paper on both of its sides. It may be any of several thicknesses, in any of a variety of colors. It is often employed as a surface on which to… …   Glossary of Art Terms

  • foam metal — Смотри Пенометалл …   Энциклопедический словарь по металлургии

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”